From 3650d59afe69484c7d8c489763e04ddd3d79c03b Mon Sep 17 00:00:00 2001 From: Akaash Suresh Date: Thu, 2 Jan 2020 11:52:23 -0600 Subject: Merge upstream/master with userspace --- users/curry/.gitignore | 1 + users/curry/config.h | 116 +++++++++ users/curry/curry.c | 131 ++++++++++ users/curry/curry.h | 57 +++++ users/curry/oled.c | 162 ++++++++++++ users/curry/process_records.c | 85 +++++++ users/curry/process_records.h | 104 ++++++++ users/curry/rgb_stuff.c | 471 +++++++++++++++++++++++++++++++++++ users/curry/rgb_stuff.h | 32 +++ users/curry/rgblight_breathe_table.h | 118 +++++++++ users/curry/rules.mk | 61 +++++ users/curry/tap_dances.c | 3 + users/curry/tap_dances.h | 3 + users/curry/wrappers.h | 92 +++++++ 14 files changed, 1436 insertions(+) create mode 100644 users/curry/.gitignore create mode 100644 users/curry/config.h create mode 100644 users/curry/curry.c create mode 100644 users/curry/curry.h create mode 100644 users/curry/oled.c create mode 100644 users/curry/process_records.c create mode 100644 users/curry/process_records.h create mode 100644 users/curry/rgb_stuff.c create mode 100644 users/curry/rgb_stuff.h create mode 100644 users/curry/rgblight_breathe_table.h create mode 100644 users/curry/rules.mk create mode 100644 users/curry/tap_dances.c create mode 100644 users/curry/tap_dances.h create mode 100644 users/curry/wrappers.h (limited to 'users') diff --git a/users/curry/.gitignore b/users/curry/.gitignore new file mode 100644 index 0000000000..c6df8c0139 --- /dev/null +++ b/users/curry/.gitignore @@ -0,0 +1 @@ +secrets.c diff --git a/users/curry/config.h b/users/curry/config.h new file mode 100644 index 0000000000..ac4a8f0709 --- /dev/null +++ b/users/curry/config.h @@ -0,0 +1,116 @@ +#pragma once + +// Use custom magic number so that when switching branches, EEPROM always gets reset +#define EECONFIG_MAGIC_NUMBER (uint16_t)0x420 + +/* Set Polling rate to 1000Hz */ +#define USB_POLLING_INTERVAL_MS 1 + +#ifdef RGBLIGHT_ENABLE +# undef RGBLIGHT_ANIMATIONS +# if defined(__AVR__) && !defined(__AVR_AT90USB1286__) +# define RGBLIGHT_SLEEP +# define RGBLIGHT_EFFECT_BREATHING +# define RGBLIGHT_EFFECT_SNAKE +# define RGBLIGHT_EFFECT_KNIGHT +# else +# define RGBLIGHT_ANIMATIONS +# endif +#endif // RGBLIGHT_ENABLE + +#ifdef RGB_MATRIX_ENABLE +# define RGB_MATRIX_KEYPRESSES // reacts to keypresses (will slow down matrix scan by a lot) +// # define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (not recommened) +# define RGB_MATRIX_FRAMEBUFFER_EFFECTS +// # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +# define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended +// # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 +// # define EECONFIG_RGB_MATRIX (uint32_t *)16 + +# if defined(__AVR__) && !defined(__AVR_AT90USB1286__) +# define DISABLE_RGB_MATRIX_ALPHAS_MODS +# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define DISABLE_RGB_MATRIX_BREATHING +# define DISABLE_RGB_MATRIX_BAND_SAT +# define DISABLE_RGB_MATRIX_BAND_VAL +# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define DISABLE_RGB_MATRIX_CYCLE_ALL +# define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN +// # define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define DISABLE_RGB_MATRIX_DUAL_BEACON +# define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define DISABLE_RGB_MATRIX_CYCLE_SPIRAL +# define DISABLE_RGB_MATRIX_RAINBOW_BEACON +# define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define DISABLE_RGB_MATRIX_RAINDROPS +# define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +// # define DISABLE_RGB_MATRIX_TYPING_HEATMAP +# define DISABLE_RGB_MATRIX_DIGITAL_RAIN +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define DISABLE_RGB_MATRIX_SPLASH +# define DISABLE_RGB_MATRIX_MULTISPLASH +# define DISABLE_RGB_MATRIX_SOLID_SPLASH +# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +# endif // AVR +#endif // RGB_MATRIX_ENABLE + +#ifndef ONESHOT_TAP_TOGGLE +# define ONESHOT_TAP_TOGGLE 2 +#endif // !ONESHOT_TAP_TOGGLE + +#ifndef ONESHOT_TIMEOUT +# define ONESHOT_TIMEOUT 3000 +#endif // !ONESHOT_TIMEOUT + +#ifndef QMK_KEYS_PER_SCAN +# define QMK_KEYS_PER_SCAN 4 +#endif // !QMK_KEYS_PER_SCAN + +// this makes it possible to do rolling combos (zx) with keys that +// convert to other keys on hold (z becomes ctrl when you hold it, +// and when this option isn't enabled, z rapidly followed by x +// actually sends Ctrl-x. That's bad.) +#define IGNORE_MOD_TAP_INTERRUPT +#undef PERMISSIVE_HOLD +//#define TAPPING_FORCE_HOLD +//#define RETRO_TAPPING + +#define FORCE_NKRO + +#ifndef TAPPING_TOGGLE +# define TAPPING_TOGGLE 1 +#endif + +#ifdef TAPPING_TERM +# undef TAPPING_TERM +#endif // TAPPING_TERM +#if defined(KEYBOARD_ergodox_ez) +# define TAPPING_TERM 185 +#elif defined(KEYBOARD_crkbd) +# define TAPPING_TERM 200 +#else +# define TAPPING_TERM 175 +#endif + +#define TAP_CODE_DELAY 5 + +/* Disable unused and unneeded features to reduce on firmware size */ +#ifdef LOCKING_SUPPORT_ENABLE +# undef LOCKING_SUPPORT_ENABLE +#endif +#ifdef LOCKING_RESYNC_ENABLE +# undef LOCKING_RESYNC_ENABLE +#endif diff --git a/users/curry/curry.c b/users/curry/curry.c new file mode 100644 index 0000000000..b6afa5ef2e --- /dev/null +++ b/users/curry/curry.c @@ -0,0 +1,131 @@ +#include "curry.h" + +userspace_config_t userspace_config; + +#define CURRY_UNICODE_MODE 1 + +void bootmagic_lite(void) { + matrix_scan(); +#if defined(DEBOUNCING_DELAY) && DEBOUNCING_DELAY > 0 + wait_ms(DEBOUNCING_DELAY * 2); +#elif defined(DEBOUNCE) && DEBOUNCE > 0 + wait_ms(DEBOUNCE * 2); +#else + wait_ms(30); +#endif + matrix_scan(); + if (matrix_get_row(BOOTMAGIC_LITE_ROW) & (1 << BOOTMAGIC_LITE_COLUMN)) { + bootloader_jump(); + } +} + +__attribute__((weak)) void keyboard_pre_init_keymap(void) {} + +void keyboard_pre_init_user(void) { + userspace_config.raw = eeconfig_read_user(); + keyboard_pre_init_keymap(); +} + +__attribute__((weak)) void matrix_init_keymap(void) {} + +// Call user matrix init, set default RGB colors and then +// call the keymap's init function +void matrix_init_user(void) { +#if (defined(UNICODE_ENABLE) || defined(UNICODEMAP_ENABLE) || defined(UCIS_ENABLE)) + set_unicode_input_mode(CURRY_UNICODE_MODE); + get_unicode_input_mode(); +#endif // UNICODE_ENABLE + matrix_init_keymap(); +} + +__attribute__((weak)) void keyboard_post_init_keymap(void) {} + +void keyboard_post_init_user(void) { +#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE) + keyboard_post_init_rgb(); +#endif + keyboard_post_init_keymap(); +} + +__attribute__((weak)) void shutdown_keymap(void) {} + +void rgb_matrix_update_pwm_buffers(void); + +// On RESET, set all RGB to red, shutdown the keymap. +void shutdown_user(void) { +#ifdef RGBLIGHT_ENABLE + rgblight_enable_noeeprom(); + rgblight_mode_noeeprom(1); + rgblight_setrgb_red(); +#endif // RGBLIGHT_ENABLE +#ifdef RGB_MATRIX_ENABLE + rgb_matrix_set_color_all(0xFF, 0x00, 0x00); + rgb_matrix_update_pwm_buffers(); +#endif // RGB_MATRIX_ENABLE + shutdown_keymap(); +} + +__attribute__((weak)) void suspend_power_down_keymap(void) {} + +void suspend_power_down_user(void) { suspend_power_down_keymap(); } + +__attribute__((weak)) void suspend_wakeup_init_keymap(void) {} + +void suspend_wakeup_init_user(void) { suspend_wakeup_init_keymap(); } + +__attribute__((weak)) void matrix_scan_keymap(void) {} + +// No global matrix scan code, so just run keymap's matrix +// scan function +void matrix_scan_user(void) { + static bool has_ran_yet; + if (!has_ran_yet) { + has_ran_yet = true; + startup_user(); + } + +#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE) + matrix_scan_rgb(); +#endif // RGBLIGHT_ENABLE + + matrix_scan_keymap(); +} + +__attribute__((weak)) layer_state_t layer_state_set_keymap(layer_state_t state) { return state; } + +// On Layer change, run keymap's layer change check +layer_state_t layer_state_set_user(layer_state_t state) { + state = update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST); +#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE) + state = layer_state_set_rgb(state); +#endif // RGBLIGHT_ENABLE + return layer_state_set_keymap(state); +} + +__attribute__((weak)) layer_state_t default_layer_state_set_keymap(layer_state_t state) { return state; } + +// Runs state check and changes underglow color and animation +layer_state_t default_layer_state_set_user(layer_state_t state) { + return default_layer_state_set_keymap(state); +} + +__attribute__((weak)) void led_set_keymap(uint8_t usb_led) {} + +// Any custom LED code goes here. +void led_set_user(uint8_t usb_led) { led_set_keymap(usb_led); } + +__attribute__((weak)) void eeconfig_init_keymap(void) {} + +void eeconfig_init_user(void) { + userspace_config.raw = 0; + userspace_config.rgb_layer_change = true; + eeconfig_update_user(userspace_config.raw); +#if (defined(UNICODE_ENABLE) || defined(UNICODEMAP_ENABLE) || defined(UCIS_ENABLE)) + set_unicode_input_mode(CURRY_UNICODE_MODE); + get_unicode_input_mode(); +#else + eeprom_update_byte(EECONFIG_UNICODEMODE, CURRY_UNICODE_MODE); +#endif + eeconfig_init_keymap(); + keyboard_init(); +} diff --git a/users/curry/curry.h b/users/curry/curry.h new file mode 100644 index 0000000000..985453c49b --- /dev/null +++ b/users/curry/curry.h @@ -0,0 +1,57 @@ +#pragma once + +#include QMK_KEYBOARD_H + +#include "version.h" +#include "eeprom.h" +#include "wrappers.h" +#include "process_records.h" + +#ifdef TAP_DANCE_ENABLE +# include "tap_dances.h" +#endif // TAP_DANCE_ENABLE +#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE) +# include "rgb_stuff.h" +#endif +#if defined(KEYBOARD_lily58_rev1) & defined(PROTOCOL_LUFA) +# include "lufa.h" +# include "split_util.h" +#endif + +/* Define layer names */ +enum userspace_layers { + _QWERTY = 0, + _NUMLOCK = 0, + _COLEMAK, + _DVORAK, + _MODS, + _LOWER, + _RAISE, + _ADJUST, +}; + +void matrix_init_keymap(void); +void shutdown_keymap(void); +void suspend_power_down_keymap(void); +void suspend_wakeup_init_keymap(void); +void matrix_scan_keymap(void); +layer_state_t layer_state_set_keymap(layer_state_t state); +layer_state_t default_layer_state_set_keymap(layer_state_t state); +void led_set_keymap(uint8_t usb_led); +void eeconfig_init_keymap(void); + +// clang-format off +typedef union { + uint32_t raw; + struct { + bool rgb_layer_change :1; + bool is_overwatch :1; + bool nuke_switch :1; + uint8_t unicode_mod :4; + bool swapped_numbers :1; + bool rgb_matrix_idle_anim :1; + }; +} userspace_config_t; +// clang-format on + +extern userspace_config_t userspace_config; diff --git a/users/curry/oled.c b/users/curry/oled.c new file mode 100644 index 0000000000..4eb23423eb --- /dev/null +++ b/users/curry/oled.c @@ -0,0 +1,162 @@ +#include "curry.h" + +#ifdef OLED_DRIVER_ENABLE +#define KEYLOGGER_LENGTH 5 +static uint32_t oled_timer = 0; +static char keylog_str[KEYLOGGER_LENGTH + 1] = {"\n"}; +static uint16_t log_timer = 0; +// clang-format off +static const char PROGMEM code_to_name[0xFF] = { +// 0 1 2 3 4 5 6 7 8 9 A B c D E F + ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l', // 0x + 'm', 'n', 'o', 'p', 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', '1', '2', // 1x + '3', '4', '5', '6', '7', '8', '9', '0', 20, 19, 27, 26, 22, '-', '=', '[', // 2x + ']','\\', '#', ';','\'', '`', ',', '.', '/', 128, ' ', ' ', ' ', ' ', ' ', ' ', // 3x + ' ', ' ', ' ', ' ', ' ', ' ', 'P', 'S', ' ', ' ', ' ', ' ', 16, ' ', ' ', ' ', // 4x + ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // 5x + ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // 6x + ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // 7x + ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // 8x + ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // 9x + ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // Ax + ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // Bx + ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // Cx + ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // Dx + 'C', 'S', 'A', 'C', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // Ex + ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ' // Fx +}; + +void add_keylog(uint16_t keycode); + +oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_270; } + +void add_keylog(uint16_t keycode) { + if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) || (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX) || (keycode >= QK_MODS && keycode <= QK_MODS_MAX)) { + keycode = keycode & 0xFF; + } else if (keycode > 0xFF) { + keycode = 0; + } + + for (uint8_t i = (KEYLOGGER_LENGTH - 1); i > 0; --i) { + keylog_str[i] = keylog_str[i - 1]; + } + + if (keycode < (sizeof(code_to_name) / sizeof(char))) { + keylog_str[0] = pgm_read_byte(&code_to_name[keycode]); + } + + log_timer = timer_read(); +} + +void render_keylogger_status(void) { + oled_write_P(PSTR("Keys"), false); + oled_write(keylog_str, false); +} + +void render_default_layer_state(void) { + oled_write_P(PSTR("Lyout"), false); + switch (get_highest_layer(default_layer_state)) { + case _QWERTY: + oled_write_P(PSTR(" QRTY"), false); + break; + case _COLEMAK: + oled_write_P(PSTR(" COLE"), false); + break; + case _DVORAK: + oled_write_P(PSTR(" DVRK"), false); + break; + } +} + +void render_layer_state(void) { + oled_write_P(PSTR("LAYER"), false); + oled_write_P(PSTR("Lower"), layer_state_is(_LOWER)); + oled_write_P(PSTR("Raise"), layer_state_is(_RAISE)); + oled_write_P(PSTR(" Mods"), layer_state_is(_MODS)); +} + +void render_keylock_status(uint8_t led_usb_state) { + oled_write_P(PSTR("Lock:"), false); + oled_write_P(PSTR(" "), false); + oled_write_P(PSTR("N"), led_usb_state & (1 << USB_LED_NUM_LOCK)); + oled_write_P(PSTR("C"), led_usb_state & (1 << USB_LED_CAPS_LOCK)); + oled_write_ln_P(PSTR("S"), led_usb_state & (1 << USB_LED_SCROLL_LOCK)); +} + +void render_mod_status(uint8_t modifiers) { + oled_write_P(PSTR("Mods:"), false); + oled_write_P(PSTR(" "), false); + oled_write_P(PSTR("S"), (modifiers & MOD_MASK_SHIFT)); + oled_write_P(PSTR("C"), (modifiers & MOD_MASK_CTRL)); + oled_write_P(PSTR("A"), (modifiers & MOD_MASK_ALT)); + oled_write_P(PSTR("G"), (modifiers & MOD_MASK_GUI)); +} + +void render_bootmagic_status(void) { + /* Show Ctrl-Gui Swap options */ + static const char PROGMEM logo[][2][3] = { + {{0x97, 0x98, 0}, {0xb7, 0xb8, 0}}, + {{0x95, 0x96, 0}, {0xb5, 0xb6, 0}}, + }; + oled_write_P(PSTR("BTMGK"), false); + oled_write_P(PSTR(" "), false); + oled_write_P(logo[0][0], !keymap_config.swap_lctl_lgui); + oled_write_P(logo[1][0], keymap_config.swap_lctl_lgui); + oled_write_P(PSTR(" "), false); + oled_write_P(logo[0][1], !keymap_config.swap_lctl_lgui); + oled_write_P(logo[1][1], keymap_config.swap_lctl_lgui); + oled_write_P(PSTR(" NKRO"), keymap_config.nkro); +} + +void render_user_status(void) { + oled_write_P(PSTR("USER:"), false); + oled_write_P(PSTR(" Anim"), userspace_config.rgb_matrix_idle_anim); + oled_write_P(PSTR(" Layr"), userspace_config.rgb_layer_change); + oled_write_P(PSTR(" Nuke"), userspace_config.nuke_switch); +} + +void render_status_main(void) { + /* Show Keyboard Layout */ + render_default_layer_state(); + render_keylock_status(host_keyboard_leds()); + render_bootmagic_status(); + render_user_status(); + + render_keylogger_status(); +} + +void render_status_secondary(void) { + /* Show Keyboard Layout */ + render_default_layer_state(); + render_layer_state(); + render_mod_status(get_mods() | get_oneshot_mods()); + + render_keylogger_status(); +} + +void oled_task_user(void) { + if (timer_elapsed32(oled_timer) > 30000) { + oled_off(); + return; + } +# ifndef SPLIT_KEYBOARD + else { + oled_on(); + } +# endif + if (is_keyboard_master()) { + render_status_main(); // Renders the current keyboard state (layer, lock, caps, scroll, etc) + } else { + render_status_secondary(); + } +} + +bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { + oled_timer = timer_read32(); + add_keylog(keycode); + } + return true; +} + +#endif diff --git a/users/curry/process_records.c b/users/curry/process_records.c new file mode 100644 index 0000000000..fd1d61ad9d --- /dev/null +++ b/users/curry/process_records.c @@ -0,0 +1,85 @@ +#include "curry.h" + +uint16_t copy_paste_timer; + +__attribute__((weak)) bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { return true; } + +__attribute__((weak)) bool process_record_secrets(uint16_t keycode, keyrecord_t *record) { return true; } + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + xprintf("KL: kc: %u, col: %u, row: %u, pressed: %u\n", keycode, record->event.key.col, record->event.key.row, record->event.pressed); + switch (keycode) { + case KC_MAKE: + if (!record->event.pressed) { + uint8_t temp_mod = mod_config(get_mods()); + uint8_t temp_osm = mod_config(get_oneshot_mods()); + clear_mods(); + clear_oneshot_mods(); + send_string_with_delay_P(PSTR("make " QMK_KEYBOARD ":" QMK_KEYMAP), TAP_CODE_DELAY); + if ((temp_mod | temp_osm) & MOD_MASK_SHIFT) { + send_string_with_delay_P(PSTR(":flash"), TAP_CODE_DELAY); + } + if ((temp_mod | temp_osm) & MOD_MASK_CTRL) { + send_string_with_delay_P(PSTR(" -j8 --output-sync"), TAP_CODE_DELAY); + } +#ifdef RGB_MATRIX_SPLIT_RIGHT + send_string_with_delay_P(PSTR(" RGB_MATRIX_SPLIT_RIGHT=yes"), TAP_CODE_DELAY); +# ifndef OLED_DRIVER_ENABLE + send_string_with_delay_P(PSTR(" OLED_DRIVER_ENABLE=no"), TAP_CODE_DELAY); +# endif +#endif + send_string_with_delay_P(PSTR(SS_TAP(X_ENTER)), TAP_CODE_DELAY); + } + + break; + + case VRSN: // Prints firmware version + if (record->event.pressed) { + send_string_with_delay_P(PSTR(QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION ", Built on: " QMK_BUILDDATE), TAP_CODE_DELAY); + } + break; + + case KC_CCCV: // One key copy/paste + if (record->event.pressed) { + copy_paste_timer = timer_read(); + } else { + if (timer_elapsed(copy_paste_timer) > TAPPING_TERM) { // Hold, copy + register_code(KC_LCTL); + tap_code(KC_C); + unregister_code(KC_LCTL); + } else { // Tap, paste + register_code(KC_LCTL); + tap_code(KC_V); + unregister_code(KC_LCTL); + } + } + break; +#ifdef UNICODE_ENABLE + case UC_FLIP: // (ノಠ痊ಠ)ノ彡┻━┻ + if (record->event.pressed) { + send_unicode_hex_string("0028 30CE 0CA0 75CA 0CA0 0029 30CE 5F61 253B 2501 253B"); + } + break; + case UC_TABL: // ┬─┬ノ( º _ ºノ) + if (record->event.pressed) { + send_unicode_hex_string("252C 2500 252C 30CE 0028 0020 00BA 0020 005F 0020 00BA 30CE 0029"); + } + break; + case UC_SHRG: // ¯\_(ツ)_/¯ + if (record->event.pressed) { + send_unicode_hex_string("00AF 005C 005F 0028 30C4 0029 005F 002F 00AF"); + } + break; + case UC_DISA: // ಠ_ಠ + if (record->event.pressed) { + send_unicode_hex_string("0CA0 005F 0CA0"); + } + break; +#endif + } + return process_record_keymap(keycode, record) && +#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE) + process_record_user_rgb(keycode, record) && +#endif // RGBLIGHT_ENABLE + process_record_secrets(keycode, record); +} diff --git a/users/curry/process_records.h b/users/curry/process_records.h new file mode 100644 index 0000000000..6170ed4c7e --- /dev/null +++ b/users/curry/process_records.h @@ -0,0 +1,104 @@ +#pragma once +#include "curry.h" + +#if defined(KEYMAP_SAFE_RANGE) +# define PLACEHOLDER_SAFE_RANGE KEYMAP_SAFE_RANGE +#else +# define PLACEHOLDER_SAFE_RANGE SAFE_RANGE +#endif + +enum userspace_custom_keycodes { + VRSN = PLACEHOLDER_SAFE_RANGE, // Prints QMK Firmware and board info + KC_QWERTY, // Sets default layer to QWERTY + KC_COLEMAK, // Sets default layer to COLEMAK + KC_DVORAK, // Sets default layer to DVORAK + KC_MAKE, // Run keyboard's customized make command + KC_RGB_T, // Toggles RGB Layer Indication mode + RGB_IDL, // RGB Idling animations + KC_SECRET_1, // test1 + KC_SECRET_2, // test2 + KC_SECRET_3, // test3 + KC_SECRET_4, // test4 + KC_SECRET_5, // test5 + KC_CCCV, // Hold to copy, tap to paste + KC_NUKE, // NUCLEAR LAUNCH DETECTED!!! + UC_FLIP, // (ಠ痊ಠ)┻━┻ + UC_TABL, // ┬─┬ノ( º _ ºノ) + UC_SHRG, // ¯\_(ツ)_/¯ + UC_DISA, // ಠ_ಠ + KC_DT1, + KC_DT2, + KC_DT3, + KC_DT4, + NEW_SAFE_RANGE // use "NEWPLACEHOLDER for keymap specific codes +}; + +bool process_record_secrets(uint16_t keycode, keyrecord_t *record); +bool process_record_keymap(uint16_t keycode, keyrecord_t *record); + +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) +#define ADJUST MO(_ADJUST) +#define TG_MODS TG(_MODS) +#define OS_LWR OSL(_LOWER) +#define OS_RSE OSL(_RAISE) + +#define KC_SEC1 KC_SECRET_1 +#define KC_SEC2 KC_SECRET_2 +#define KC_SEC3 KC_SECRET_3 +#define KC_SEC4 KC_SECRET_4 +#define KC_SEC5 KC_SECRET_5 + +#define QWERTY KC_QWERTY +#define DVORAK KC_DVORAK +#define COLEMAK KC_COLEMAK + +#define KC_RESET RESET +#define KC_RST KC_RESET + +#ifdef SWAP_HANDS_ENABLE +# define KC_C1R3 SH_T(KC_TAB) +#else // SWAP_HANDS_ENABLE +# define KC_C1R3 KC_TAB +#endif // SWAP_HANDS_ENABLE + +#define BK_LWER LT(_LOWER, KC_BSPC) +#define SP_LWER LT(_LOWER, KC_SPC) +#define DL_RAIS LT(_RAISE, KC_DEL) +#define ET_RAIS LT(_RAISE, KC_ENTER) + +/* OSM keycodes, to keep things clean and easy to change */ +#define KC_MLSF OSM(MOD_LSFT) +#define KC_MRSF OSM(MOD_RSFT) + +#define OS_LGUI OSM(MOD_LGUI) +#define OS_RGUI OSM(MOD_RGUI) +#define OS_LSFT OSM(MOD_LSFT) +#define OS_RSFT OSM(MOD_RSFT) +#define OS_LCTL OSM(MOD_LCTL) +#define OS_RCTL OSM(MOD_RCTL) +#define OS_LALT OSM(MOD_LALT) +#define OS_RALT OSM(MOD_RALT) +#define OS_MEH OSM(MOD_MEH) +#define OS_HYPR OSM(MOD_HYPR) + +#define M_LALT ALT_T(KC_TAB) +#define M_RALT RALT_T(KC_QUOT) + +#define M_LCTL CTL_T(KC_TAB) +#define M_RCTL RCTL_T(KC_QUOT) + +#define MT_ESC MT(MOD_LCTL, KC_ESC) + +#define ALT_APP ALT_T(KC_APP) + +#define MG_NKRO MAGIC_TOGGLE_NKRO + +#define UC_IRNY UC(0x2E2E) +#define UC_CLUE UC(0x203D) + +// KWin Window Switching +#define KC_DT1 LCTL(KC_F1) +#define KC_DT2 LCTL(KC_F2) +#define KC_DT3 LCTL(KC_F3) +#define KC_DT4 LCTL(KC_F4) diff --git a/users/curry/rgb_stuff.c b/users/curry/rgb_stuff.c new file mode 100644 index 0000000000..1129f70be9 --- /dev/null +++ b/users/curry/rgb_stuff.c @@ -0,0 +1,471 @@ +#include "curry.h" +#include "rgb_stuff.h" +#include "eeprom.h" + +#if defined(RGBLIGHT_ENABLE) +extern rgblight_config_t rgblight_config; +bool has_initialized; + +void rgblight_sethsv_default_helper(uint8_t index) { rgblight_sethsv_at(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, index); } +#endif // RGBLIGHT_ENABLE + +#if defined(RGB_MATRIX_ENABLE) +static uint32_t hypno_timer; +# if defined(SPLIT_KEYBOARD) || defined(KEYBOARD_ergodox_ez) || defined(KEYBOARD_crkbd) +# define RGB_MATRIX_REST_MODE RGB_MATRIX_CYCLE_OUT_IN_DUAL +# else +# define RGB_MATRIX_REST_MODE RGB_MATRIX_CYCLE_OUT_IN +# endif + +void suspend_power_down_keymap(void) { rgb_matrix_set_suspend_state(true); } + +void suspend_wakeup_init_keymap(void) { rgb_matrix_set_suspend_state(false); } + +void check_default_layer(uint8_t mode, uint8_t type) { + switch (get_highest_layer(default_layer_state)) { + case _QWERTY: + rgb_matrix_layer_helper(HSV_CYAN, mode, rgb_matrix_config.speed, type); + break; + case _COLEMAK: + rgb_matrix_layer_helper(HSV_MAGENTA, mode, rgb_matrix_config.speed, type); + break; + case _DVORAK: + rgb_matrix_layer_helper(HSV_SPRINGGREEN, mode, rgb_matrix_config.speed, type); + break; + } +} + +void rgb_matrix_indicators_user(void) { + if (userspace_config.rgb_layer_change && +# ifdef RGB_DISABLE_WHEN_USB_SUSPENDED + !g_suspend_state && +# endif +# if defined(RGBLIGHT_ENABLE) + (!rgblight_config.enable && rgb_matrix_config.enable) +# else + rgb_matrix_config.enable +# endif + ) { + switch (get_highest_layer(layer_state)) { + case _RAISE: + rgb_matrix_layer_helper(HSV_YELLOW, 0, rgb_matrix_config.speed, LED_FLAG_UNDERGLOW); + break; + case _LOWER: + rgb_matrix_layer_helper(HSV_GREEN, 0, rgb_matrix_config.speed, LED_FLAG_UNDERGLOW); + break; + case _ADJUST: + rgb_matrix_layer_helper(HSV_RED, 0, rgb_matrix_config.speed, LED_FLAG_UNDERGLOW); + break; + default: { + check_default_layer(IS_LAYER_ON(_MODS), LED_FLAG_UNDERGLOW); + break; + } + } + check_default_layer(0, LED_FLAG_MODIFIER); + } +} +#endif + +/* Custom indicators for modifiers. + * This allows for certain lights to be lit up, based on what mods are active, giving some visual feedback. + * This is especially useful for One Shot Mods, since it's not always obvious if they're still lit up. + */ +#ifdef RGBLIGHT_ENABLE +# ifdef INDICATOR_LIGHTS +void set_rgb_indicators(uint8_t this_mod, uint8_t this_led, uint8_t this_osm) { + if (userspace_config.rgb_layer_change && get_highest_layer(layer_state) == 0) { + if ((this_mod | this_osm) & MOD_MASK_SHIFT || this_led & (1 << USB_LED_CAPS_LOCK)) { +# ifdef SHFT_LED1 + rgblight_sethsv_at(120, 255, 255, SHFT_LED1); +# endif // SHFT_LED1 +# ifdef SHFT_LED2 + rgblight_sethsv_at(120, 255, 255, SHFT_LED2); +# endif // SHFT_LED2 + } else { +# ifdef SHFT_LED1 + rgblight_sethsv_default_helper(SHFT_LED1); +# endif // SHFT_LED1 +# ifdef SHFT_LED2 + rgblight_sethsv_default_helper(SHFT_LED2); +# endif // SHFT_LED2 + } + if ((this_mod | this_osm) & MOD_MASK_CTRL) { +# ifdef CTRL_LED1 + rgblight_sethsv_at(0, 255, 255, CTRL_LED1); +# endif // CTRL_LED1 +# ifdef CTRL_LED2 + rgblight_sethsv_at(0, 255, 255, CTRL_LED2); +# endif // CTRL_LED2 + } else { +# ifdef CTRL_LED1 + rgblight_sethsv_default_helper(CTRL_LED1); +# endif // CTRL_LED1 +# ifdef CTRL_LED2 + rgblight_sethsv_default_helper(CTRL_LED2); +# endif // CTRL_LED2 + } + if ((this_mod | this_osm) & MOD_MASK_GUI) { +# ifdef GUI_LED1 + rgblight_sethsv_at(51, 255, 255, GUI_LED1); +# endif // GUI_LED1 +# ifdef GUI_LED2 + rgblight_sethsv_at(51, 255, 255, GUI_LED2); +# endif // GUI_LED2 + } else { +# ifdef GUI_LED1 + rgblight_sethsv_default_helper(GUI_LED1); +# endif // GUI_LED1 +# ifdef GUI_LED2 + rgblight_sethsv_default_helper(GUI_LED2); +# endif // GUI_LED2 + } + if ((this_mod | this_osm) & MOD_MASK_ALT) { +# ifdef ALT_LED1 + rgblight_sethsv_at(240, 255, 255, ALT_LED1); +# endif // ALT_LED1 +# ifdef GUI_LED2 + rgblight_sethsv_at(240, 255, 255, ALT_LED2); +# endif // GUI_LED2 + } else { +# ifdef GUI_LED1 + rgblight_sethsv_default_helper(ALT_LED1); +# endif // GUI_LED1 +# ifdef GUI_LED2 + rgblight_sethsv_default_helper(ALT_LED2); +# endif // GUI_LED2 + } + } +} + +/* Function for the indicators */ +void matrix_scan_indicator(void) { + if (has_initialized) { + set_rgb_indicators(get_mods(), host_keyboard_leds(), get_oneshot_mods()); + } +} +# endif // INDICATOR_LIGHTS + +# ifdef RGBLIGHT_TWINKLE +static rgblight_fadeout lights[RGBLED_NUM]; + +__attribute__((weak)) bool rgblight_twinkle_is_led_used_keymap(uint8_t index) { return false; } + +/* This function checks for used LEDs. This way, collisions don't occur and cause weird rendering */ +bool rgblight_twinkle_is_led_used(uint8_t index) { + switch (index) { +# ifdef INDICATOR_LIGHTS +# ifdef SHFT_LED1 + case SHFT_LED1: + return true; +# endif // SHFT_LED1 +# ifdef SHFT_LED2 + case SHFT_LED2: + return true; +# endif // SHFT_LED2 +# ifdef CTRL_LED1 + case CTRL_LED1: + return true; +# endif // CTRL_LED1 +# ifdef CTRL_LED2 + case CTRL_LED2: + return true; +# endif // CTRL_LED2 +# ifdef GUI_LED1 + case GUI_LED1: + return true; +# endif // GUI_LED1 +# ifdef GUI_LED2 + case GUI_LED2: + return true; +# endif // GUI_LED2 +# ifdef ALT_LED1 + case ALT_LED1: + return true; +# endif // ALT_LED1 +# ifdef ALT_LED2 + case ALT_LED2: + return true; +# endif // ALT_LED2 +# endif // INDICATOR_LIGHTS + default: + return rgblight_twinkle_is_led_used_keymap(index); + } +} + +/* Handler for fading/twinkling effect */ +void scan_rgblight_fadeout(void) { // Don't effing change this function .... rgblight_sethsv is supppppper intensive + bool litup = false; + for (uint8_t light_index = 0; light_index < RGBLED_NUM; ++light_index) { + if (lights[light_index].enabled && timer_elapsed(lights[light_index].timer) > 10) { + rgblight_fadeout *light = &lights[light_index]; + litup = true; + + if (light->life) { + light->life -= 1; + if (get_highest_layer(layer_state) == 0) { + sethsv(light->hue + rand() % 0xF, 255, light->life, (LED_TYPE *)&led[light_index]); + } + light->timer = timer_read(); + } else { + if (light->enabled && get_highest_layer(layer_state) == 0) { + rgblight_sethsv_default_helper(light_index); + } + litup = light->enabled = false; + } + } + } + if (litup && get_highest_layer(layer_state) == 0) { + rgblight_set(); + } +} + +/* Triggers a LED to fade/twinkle. + * This function handles the selection of the LED and prepres for it to be used. + */ +void start_rgb_light(void) { + uint8_t indices[RGBLED_NUM]; + uint8_t indices_count = 0; + uint8_t min_life = 0xFF; + uint8_t min_life_index = -1; + for (uint8_t index = 0; index < RGBLED_NUM; ++index) { + if (rgblight_twinkle_is_led_used(index)) { + continue; + } + if (lights[index].enabled) { + if (min_life_index == -1 || lights[index].life < min_life) { + min_life = lights[index].life; + min_life_index = index; + } + continue; + } + + indices[indices_count] = index; + ++indices_count; + } + + uint8_t light_index; + if (!indices_count) { + light_index = min_life_index; + } else { + light_index = indices[rand() % indices_count]; + } + + rgblight_fadeout *light = &lights[light_index]; + light->enabled = true; + light->timer = timer_read(); + light->life = 0xC0 + rand() % 0x40; + + light->hue = rgblight_config.hue + (rand() % 0xB4) - 0x54; + + rgblight_sethsv_at(light->hue, 255, light->life, light_index); +} +# endif +#endif // RGBLIGHT_ENABLE + +bool process_record_user_rgb(uint16_t keycode, keyrecord_t *record) { + uint16_t temp_keycode = keycode; + // Filter out the actual keycode from MT and LT keys. + if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) || (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX)) { + temp_keycode &= 0xFF; + } + +#if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS) + hypno_timer = timer_read32(); + if (userspace_config.rgb_matrix_idle_anim && rgb_matrix_get_mode() == RGB_MATRIX_REST_MODE) { + rgb_matrix_mode_noeeprom(RGB_MATRIX_TYPING_HEATMAP); + } +#endif + + switch (temp_keycode) { +#ifdef RGBLIGHT_TWINKLE + case KC_A ... KC_SLASH: + case KC_F1 ... KC_F12: + case KC_INSERT ... KC_UP: + case KC_KP_SLASH ... KC_KP_DOT: + case KC_F13 ... KC_F24: + case KC_AUDIO_MUTE ... KC_MEDIA_REWIND: + if (record->event.pressed) { + start_rgb_light(); + } + break; +#endif // RGBLIGHT_TWINKLE + case KC_RGB_T: // This allows me to use underglow as layer indication, or as normal +#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE) + if (record->event.pressed) { + userspace_config.rgb_layer_change ^= 1; + dprintf("rgblight layer change [EEPROM]: %u\n", userspace_config.rgb_layer_change); + eeconfig_update_user(userspace_config.raw); + if (userspace_config.rgb_layer_change) { + layer_state_set(layer_state); // This is needed to immediately set the layer color (looks better) + } + } +#endif // RGBLIGHT_ENABLE + break; + case RGB_IDL: // This allows me to use underglow as layer indication, or as normal +#if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS) + if (record->event.pressed) { + userspace_config.rgb_matrix_idle_anim ^= 1; + dprintf("RGB Matrix Idle Animation [EEPROM]: %u\n", userspace_config.rgb_matrix_idle_anim); + eeconfig_update_user(userspace_config.raw); + if (userspace_config.rgb_matrix_idle_anim) { + rgb_matrix_mode_noeeprom(RGB_MATRIX_TYPING_HEATMAP); + } + } +#endif + break; + case RGB_MODE_FORWARD ... RGB_MODE_GRADIENT: // quantum_keycodes.h L400 for definitions + if (record->event.pressed) { + bool is_eeprom_updated = false; +#ifdef RGBLIGHT_ENABLE + // This disables layer indication, as it's assumed that if you're changing this ... you want that disabled + if (userspace_config.rgb_layer_change) { + userspace_config.rgb_layer_change = false; + dprintf("rgblight layer change [EEPROM]: %u\n", userspace_config.rgb_layer_change); + is_eeprom_updated = true; + } +#endif +#if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS) + if (userspace_config.rgb_matrix_idle_anim) { + userspace_config.rgb_matrix_idle_anim = false; + dprintf("RGB Matrix Idle Animation [EEPROM]: %u\n", userspace_config.rgb_matrix_idle_anim); + is_eeprom_updated = true; + } +#endif + if (is_eeprom_updated) { + eeconfig_update_user(userspace_config.raw); + } + } + break; + } + return true; +} + +void keyboard_post_init_rgb(void) { +#if defined(RGBLIGHT_ENABLE) +# if defined(RGBLIGHT_STARTUP_ANIMATION) + bool is_enabled = rgblight_config.enable; + if (userspace_config.rgb_layer_change) { + rgblight_enable_noeeprom(); + } + if (rgblight_config.enable) { + layer_state_set_user(layer_state); + uint16_t old_hue = rgblight_config.hue; + rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); + for (uint16_t i = 255; i > 0; i--) { + rgblight_sethsv_noeeprom((i + old_hue) % 255, 255, 255); + matrix_scan(); + wait_ms(10); + } + } + if (!is_enabled) { + rgblight_disable_noeeprom(); + } + +# endif + layer_state_set_user(layer_state); +#endif +#if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS) + if (userspace_config.rgb_matrix_idle_anim) { + rgb_matrix_mode_noeeprom(RGB_MATRIX_REST_MODE); + } +#endif +} + +void matrix_scan_rgb(void) { +#ifdef RGBLIGHT_ENABLE +# ifdef RGBLIGHT_TWINKLE + scan_rgblight_fadeout(); +# endif // RGBLIGHT_ENABLE + +# ifdef INDICATOR_LIGHTS + matrix_scan_indicator(); +# endif +#endif + +#if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS) + if (userspace_config.rgb_matrix_idle_anim && rgb_matrix_get_mode() == RGB_MATRIX_TYPING_HEATMAP && timer_elapsed32(hypno_timer) > 15000) { + rgb_matrix_mode_noeeprom(RGB_MATRIX_REST_MODE); + } +#endif +} + +#ifdef RGBLIGHT_ENABLE +void rgblight_set_hsv_and_mode(uint8_t hue, uint8_t sat, uint8_t val, uint8_t mode) { + rgblight_sethsv_noeeprom(hue, sat, val); + wait_us(175); // Add a slight delay between color and mode to ensure it's processed correctly + rgblight_mode_noeeprom(mode); +} +#endif + +layer_state_t layer_state_set_rgb(layer_state_t state) { +#ifdef RGBLIGHT_ENABLE + if (userspace_config.rgb_layer_change) { + switch (get_highest_layer(state)) { + case _RAISE: + rgblight_set_hsv_and_mode(HSV_YELLOW, RGBLIGHT_MODE_BREATHING + 3); + break; + case _LOWER: + rgblight_set_hsv_and_mode(HSV_GREEN, RGBLIGHT_MODE_BREATHING + 3); + break; + case _ADJUST: + rgblight_set_hsv_and_mode(HSV_RED, RGBLIGHT_MODE_KNIGHT + 2); + break; + default: // for any other layers, or the default layer + { + uint8_t mode = get_highest_layer(state) == _MODS ? RGBLIGHT_MODE_BREATHING : RGBLIGHT_MODE_STATIC_LIGHT; + switch (get_highest_layer(default_layer_state)) { + case _COLEMAK: + rgblight_set_hsv_and_mode(HSV_MAGENTA, mode); + break; + case _DVORAK: + rgblight_set_hsv_and_mode(HSV_SPRINGGREEN, mode); + break; + default: + rgblight_set_hsv_and_mode(HSV_CYAN, mode); + break; + } + break; + } + } + } +#endif // RGBLIGHT_ENABLE + + return state; +} + +#ifdef RGB_MATRIX_ENABLE +# include "lib/lib8tion/lib8tion.h" +extern led_config_t g_led_config; + +void rgb_matrix_layer_helper(uint8_t hue, uint8_t sat, uint8_t val, uint8_t mode, uint8_t speed, uint8_t led_type) { + HSV hsv = {hue, sat, val}; + if (hsv.v > rgb_matrix_config.hsv.v) { + hsv.v = rgb_matrix_config.hsv.v; + } + + switch (mode) { + case 1: // breathing + { + uint16_t time = scale16by8(g_rgb_counters.tick, speed / 8); + hsv.v = scale8(abs8(sin8(time) - 128) * 2, hsv.v); + RGB rgb = hsv_to_rgb(hsv); + for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) { + if (HAS_FLAGS(g_led_config.flags[i], led_type)) { + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + } + break; + } + default: // Solid Color + { + RGB rgb = hsv_to_rgb(hsv); + for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) { + if (HAS_FLAGS(g_led_config.flags[i], led_type)) { + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + } + break; + } + } +} +#endif diff --git a/users/curry/rgb_stuff.h b/users/curry/rgb_stuff.h new file mode 100644 index 0000000000..50b73c1c3c --- /dev/null +++ b/users/curry/rgb_stuff.h @@ -0,0 +1,32 @@ +#pragma once +#include "quantum.h" +#ifdef RGB_MATRIX_ENABLE +# include "rgb_matrix.h" +#endif + +#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_TWINKLE) +typedef struct { + bool enabled; + uint8_t hue; + uint16_t timer; + uint8_t life; +} rgblight_fadeout; +#endif + +bool process_record_user_rgb(uint16_t keycode, keyrecord_t *record); +void keyboard_post_init_rgb(void); +void matrix_scan_rgb(void); +layer_state_t layer_state_set_rgb(layer_state_t state); +layer_state_t default_layer_state_set_rgb(layer_state_t state); + +#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_TWINKLE) +void scan_rgblight_fadeout(void); +#endif +#if defined(RGBLIGHT_ENABLE) +void rgblight_sethsv_default_helper(uint8_t index); +#endif + +#ifdef RGB_MATRIX_ENABLE +void rgb_matrix_set_color_all(uint8_t red, uint8_t green, uint8_t blue); +void rgb_matrix_layer_helper(uint8_t hue, uint8_t sat, uint8_t val, uint8_t mode, uint8_t speed, uint8_t led_type); +#endif diff --git a/users/curry/rgblight_breathe_table.h b/users/curry/rgblight_breathe_table.h new file mode 100644 index 0000000000..4c6ae38faa --- /dev/null +++ b/users/curry/rgblight_breathe_table.h @@ -0,0 +1,118 @@ +#ifndef RGBLIGHT_EFFECT_BREATHE_TABLE +#define RGBLIGHT_EFFECT_BREATHE_TABLE + +// clang-format off +const uint8_t rgblight_effect_breathe_table[] PROGMEM = { +/* #define RGBLIGHT_EFFECT_BREATHE_CENTER 0.00 */ +/* #define RGBLIGHT_EFFECT_BREATHE_MAX 255 */ + + #if RGBLIGHT_BREATHE_TABLE_SIZE == 256 + 0x44, 0x45, 0x47, 0x48, 0x4a, 0x4b, 0x4c, 0x4e, + 0x4f, 0x51, 0x52, 0x54, 0x55, 0x57, 0x58, 0x5a, + 0x5c, 0x5d, 0x5f, 0x60, 0x62, 0x64, 0x65, 0x67, + 0x69, 0x6a, 0x6c, 0x6e, 0x70, 0x72, 0x73, 0x75, + 0x77, 0x79, 0x7b, 0x7c, 0x7e, 0x80, 0x82, 0x84, + 0x86, 0x88, 0x8a, 0x8b, 0x8d, 0x8f, 0x91, 0x93, + 0x95, 0x97, 0x99, 0x9b, 0x9d, 0x9f, 0xa1, 0xa3, + 0xa5, 0xa7, 0xa9, 0xaa, 0xac, 0xae, 0xb0, 0xb2, + 0xb4, 0xb6, 0xb8, 0xba, 0xbc, 0xbe, 0xbf, 0xc1, + 0xc3, 0xc5, 0xc7, 0xc9, 0xca, 0xcc, 0xce, 0xd0, + 0xd1, 0xd3, 0xd5, 0xd6, 0xd8, 0xda, 0xdb, 0xdd, + 0xde, 0xe0, 0xe1, 0xe3, 0xe4, 0xe5, 0xe7, 0xe8, + 0xe9, 0xeb, 0xec, 0xed, 0xee, 0xef, 0xf0, 0xf1, + 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, 0xf8, + 0xf9, 0xfa, 0xfa, 0xfb, 0xfc, 0xfc, 0xfc, 0xfd, + 0xfd, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, + 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfd, + 0xfd, 0xfc, 0xfc, 0xfc, 0xfb, 0xfa, 0xfa, 0xf9, + 0xf8, 0xf8, 0xf7, 0xf6, 0xf5, 0xf4, 0xf3, 0xf2, + 0xf1, 0xf0, 0xef, 0xee, 0xed, 0xec, 0xeb, 0xe9, + 0xe8, 0xe7, 0xe5, 0xe4, 0xe3, 0xe1, 0xe0, 0xde, + 0xdd, 0xdb, 0xda, 0xd8, 0xd6, 0xd5, 0xd3, 0xd1, + 0xd0, 0xce, 0xcc, 0xca, 0xc9, 0xc7, 0xc5, 0xc3, + 0xc1, 0xbf, 0xbe, 0xbc, 0xba, 0xb8, 0xb6, 0xb4, + 0xb2, 0xb0, 0xae, 0xac, 0xaa, 0xa9, 0xa7, 0xa5, + 0xa3, 0xa1, 0x9f, 0x9d, 0x9b, 0x99, 0x97, 0x95, + 0x93, 0x91, 0x8f, 0x8d, 0x8b, 0x8a, 0x88, 0x86, + 0x84, 0x82, 0x80, 0x7e, 0x7c, 0x7b, 0x79, 0x77, + 0x75, 0x73, 0x72, 0x70, 0x6e, 0x6c, 0x6a, 0x69, + 0x67, 0x65, 0x64, 0x62, 0x60, 0x5f, 0x5d, 0x5c, + 0x5a, 0x58, 0x57, 0x55, 0x54, 0x52, 0x51, 0x4f, + 0x4e, 0x4c, 0x4b, 0x4a, 0x48, 0x47, 0x45, 0x44 + #endif /* 256 bytes table */ + + #if RGBLIGHT_BREATHE_TABLE_SIZE == 128 + 0x44, 0x47, 0x4a, 0x4c, + 0x4f, 0x52, 0x55, 0x58, + 0x5c, 0x5f, 0x62, 0x65, + 0x69, 0x6c, 0x70, 0x73, + 0x77, 0x7b, 0x7e, 0x82, + 0x86, 0x8a, 0x8d, 0x91, + 0x95, 0x99, 0x9d, 0xa1, + 0xa5, 0xa9, 0xac, 0xb0, + 0xb4, 0xb8, 0xbc, 0xbf, + 0xc3, 0xc7, 0xca, 0xce, + 0xd1, 0xd5, 0xd8, 0xdb, + 0xde, 0xe1, 0xe4, 0xe7, + 0xe9, 0xec, 0xee, 0xf0, + 0xf2, 0xf4, 0xf6, 0xf8, + 0xf9, 0xfa, 0xfc, 0xfc, + 0xfd, 0xfe, 0xfe, 0xfe, + 0xfe, 0xfe, 0xfe, 0xfe, + 0xfd, 0xfc, 0xfb, 0xfa, + 0xf8, 0xf7, 0xf5, 0xf3, + 0xf1, 0xef, 0xed, 0xeb, + 0xe8, 0xe5, 0xe3, 0xe0, + 0xdd, 0xda, 0xd6, 0xd3, + 0xd0, 0xcc, 0xc9, 0xc5, + 0xc1, 0xbe, 0xba, 0xb6, + 0xb2, 0xae, 0xaa, 0xa7, + 0xa3, 0x9f, 0x9b, 0x97, + 0x93, 0x8f, 0x8b, 0x88, + 0x84, 0x80, 0x7c, 0x79, + 0x75, 0x72, 0x6e, 0x6a, + 0x67, 0x64, 0x60, 0x5d, + 0x5a, 0x57, 0x54, 0x51, + 0x4e, 0x4b, 0x48, 0x45 + #endif /* 128 bytes table */ + + #if RGBLIGHT_BREATHE_TABLE_SIZE == 64 + 0x44, 0x4a, + 0x4f, 0x55, + 0x5c, 0x62, + 0x69, 0x70, + 0x77, 0x7e, + 0x86, 0x8d, + 0x95, 0x9d, + 0xa5, 0xac, + 0xb4, 0xbc, + 0xc3, 0xca, + 0xd1, 0xd8, + 0xde, 0xe4, + 0xe9, 0xee, + 0xf2, 0xf6, + 0xf9, 0xfc, + 0xfd, 0xfe, + 0xfe, 0xfe, + 0xfd, 0xfb, + 0xf8, 0xf5, + 0xf1, 0xed, + 0xe8, 0xe3, + 0xdd, 0xd6, + 0xd0, 0xc9, + 0xc1, 0xba, + 0xb2, 0xaa, + 0xa3, 0x9b, + 0x93, 0x8b, + 0x84, 0x7c, + 0x75, 0x6e, + 0x67, 0x60, + 0x5a, 0x54, + 0x4e, 0x48 + #endif /* 64 bytes table */ +}; +// clang-format on + +static const int table_scale = 256 / sizeof(rgblight_effect_breathe_table); + +#endif /* RGBLIGHT_EFFECT_BREATHE_TABLE */ diff --git a/users/curry/rules.mk b/users/curry/rules.mk new file mode 100644 index 0000000000..2ebb807946 --- /dev/null +++ b/users/curry/rules.mk @@ -0,0 +1,61 @@ +SRC += curry.c \ + process_records.c + +LTO_ENABLE = yes +SPACE_CADET_ENABLE = no + +ifneq ($(strip $(NO_SECRETS)), yes) + ifneq ("$(wildcard $(USER_PATH)/secrets.c)","") + SRC += secrets.c + endif + ifeq ($(strip $(NO_SECRETS)), lite) + OPT_DEFS += -DNO_SECRETS + endif +endif + +ifeq ($(strip $(TAP_DANCE_ENABLE)), yes) + SRC += tap_dances.c +endif + +ifeq ($(strip $(OLED_DRIVER_ENABLE)), yes) + SRC += oled.c +endif + +ifeq ($(strip $(RGBLIGHT_ENABLE)), yes) + SRC += rgb_stuff.c + ifeq ($(strip $(INDICATOR_LIGHTS)), yes) + OPT_DEFS += -DINDICATOR_LIGHTS + endif + ifeq ($(strip $(RGBLIGHT_TWINKLE)), yes) + OPT_DEFS += -DRGBLIGHT_TWINKLE + endif + ifeq ($(strip $(RGBLIGHT_NOEEPROM)), yes) + OPT_DEFS += -DRGBLIGHT_NOEEPROM + endif + ifeq ($(strip $(RGBLIGHT_STARTUP_ANIMATION)), yes) + OPT_DEFS += -DRGBLIGHT_STARTUP_ANIMATION + endif +endif + +RGB_MATRIX_ENABLE ?= no +ifneq ($(strip $(RGB_MATRIX_ENABLE)), no) + SRC += rgb_stuff.c +endif + + +ifdef CONSOLE_ENABLE + ifeq ($(strip $(KEYLOGGER_ENABLE)), yes) + OPT_DEFS += -DKEYLOGGER_ENABLE + endif +endif + +ifeq ($(strip $(MAKE_BOOTLOADER)), yes) + OPT_DEFS += -DMAKE_BOOTLOADER +endif + +# At least until build.mk or the like drops, this is here to prevent +# VUSB boards from enabling NKRO, as they do not support it. Ideally +# this should be handled per keyboard, but until that happens ... +ifeq ($(strip $(PROTOCOL)), VUSB) + NKRO_ENABLE = no +endif diff --git a/users/curry/tap_dances.c b/users/curry/tap_dances.c new file mode 100644 index 0000000000..fe62def0d4 --- /dev/null +++ b/users/curry/tap_dances.c @@ -0,0 +1,3 @@ +#include "curry.h" + +qk_tap_dance_action_t tap_dance_actions[] = {}; diff --git a/users/curry/tap_dances.h b/users/curry/tap_dances.h new file mode 100644 index 0000000000..43ce12ffcf --- /dev/null +++ b/users/curry/tap_dances.h @@ -0,0 +1,3 @@ +#pragma once +#include "curry.h" + diff --git a/users/curry/wrappers.h b/users/curry/wrappers.h new file mode 100644 index 0000000000..fa181af2ef --- /dev/null +++ b/users/curry/wrappers.h @@ -0,0 +1,92 @@ +#pragma once +#include "curry.h" +/* +Since our quirky block definitions are basically a list of comma separated +arguments, we need a wrapper in order for these definitions to be +expanded before being used as arguments to the LAYOUT_xxx macro. +*/ +#if (!defined(LAYOUT) && defined(KEYMAP)) +# define LAYOUT KEYMAP +#endif + +// clang-format off +#define KEYMAP_wrapper(...) LAYOUT(__VA_ARGS__) +#define LAYOUT_wrapper(...) LAYOUT(__VA_ARGS__) +#define LAYOUT_ortho_4x12_wrapper(...) LAYOUT_ortho_4x12(__VA_ARGS__) +#define LAYOUT_ortho_5x12_wrapper(...) LAYOUT_ortho_5x12(__VA_ARGS__) + +/* +Blocks for each of the four major keyboard layouts +Organized so we can quickly adapt and modify all of them +at once, rather than for each keyboard, one at a time. +And this allows for much cleaner blocks in the keymaps. +For instance Tap/Hold for Control on all of the layouts + +NOTE: These are all the same length. If you do a search/replace + then you need to add/remove underscores to keep the + lengths consistent. +*/ + +#define _________________QWERTY_L1_________________ KC_Q, KC_W, KC_E, KC_R, KC_T +#define _________________QWERTY_L2_________________ KC_A, KC_S, KC_D, KC_F, KC_G +#define _________________QWERTY_L3_________________ KC_Z, KC_X, KC_C, KC_V, KC_B + +#define _________________QWERTY_R1_________________ KC_Y, KC_U, KC_I, KC_O, KC_P +#define _________________QWERTY_R2_________________ KC_H, KC_J, KC_K, KC_L, KC_SCLN +#define _________________QWERTY_R3_________________ KC_N, KC_M, KC_COMM, KC_DOT, KC_SLASH + +#define _________________COLEMAK_L1________________ KC_Q, KC_W, KC_F, KC_P, KC_B +#define _________________COLEMAK_L2________________ KC_A, KC_R, KC_S, KC_T, KC_G +#define _________________COLEMAK_L3________________ KC_Z, KC_X, KC_C, KC_D, KC_V + +#define _________________COLEMAK_R1________________ KC_J, KC_L, KC_U, KC_Y, KC_SCLN +#define _________________COLEMAK_R2________________ KC_M, KC_N, KC_E, KC_I, KC_O +#define _________________COLEMAK_R3________________ KC_K, KC_H, KC_COMM, KC_DOT, KC_SLASH + +#define _________________DVORAK_L1_________________ KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y +#define _________________DVORAK_L2_________________ KC_A, KC_O, KC_E, KC_U, KC_I +#define _________________DVORAK_L3_________________ KC_SCLN, KC_Q, KC_J, KC_K, KC_X + +#define _________________DVORAK_R1_________________ KC_F, KC_G, KC_C, KC_R, KC_L +#define _________________DVORAK_R2_________________ KC_D, KC_H, KC_T, KC_N, KC_S +#define _________________DVORAK_R3_________________ KC_B, KC_M, KC_W, KC_V, KC_Z + + +#define ________________NUMBER_LEFT________________ KC_1, KC_2, KC_3, KC_4, KC_5 +#define ________________NUMBER_RIGHT_______________ KC_6, KC_7, KC_8, KC_9, KC_0 + +#define _________________FUNC_LEFT_________________ KC_F1, KC_F2, KC_F3, KC_F4, KC_F5 +#define _________________FUNC_RIGHT________________ KC_F6, KC_F7, KC_F8, KC_F9, KC_F10 + +#define _________________SYM_LEFT__________________ KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC +#define _________________SYM_RIGHT_________________ KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN + + +#define ___________________BLANK___________________ _______, _______, _______, _______, _______ + + +#define _________________LOWER_L1__________________ _________________FUNC_LEFT_________________ +#define _________________LOWER_L2__________________ _________________SYM_LEFT__________________ +#define _________________LOWER_L3__________________ KC_DT1, KC_DT2, KC_DT3, KC_DT4, _______ + +#define _________________LOWER_R1__________________ _________________FUNC_RIGHT________________ +#define _________________LOWER_R2__________________ _________________SYM_RIGHT_________________ +#define _________________LOWER_R3__________________ _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR + +#define _________________RAISE_L1__________________ ________________NUMBER_LEFT________________ +#define _________________RAISE_L2__________________ KC_PGUP, KC_PGDN, KC_HOME, KC_END, _______ +#define _________________RAISE_L3__________________ _______, _______, _______, _______, _______ + +#define _________________RAISE_R1__________________ ________________NUMBER_RIGHT_______________ +#define _________________RAISE_R2__________________ KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______ +#define _________________RAISE_R3__________________ _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC + +#define _________________ADJUST_L1_________________ RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_TOG +#define _________________ADJUST_L2_________________ MU_TOG , CK_TOGG, AU_ON, AU_OFF, CG_NORM +#define _________________ADJUST_L3_________________ RGB_RMOD,RGB_HUD,RGB_SAD, RGB_VAD, KC_RGB_T + +#define _________________ADJUST_R1_________________ KC_SEC1, KC_SEC2, KC_SEC3, KC_SEC4, KC_SEC5 +#define _________________ADJUST_R2_________________ CG_SWAP, QWERTY, COLEMAK, DVORAK, XXXXXXX +#define _________________ADJUST_R3_________________ MG_NKRO, KC_MUTE, KC_VOLD, KC_VOLU, KC_MNXT + +// clang-format on -- cgit v1.2.3 From a0a6e24788ebbe8f78ff6bf3644eb263f9b8d765 Mon Sep 17 00:00:00 2001 From: Akaash Suresh Date: Thu, 2 Jan 2020 12:13:39 -0600 Subject: Added license and readme --- users/curry/LICENSE.md | 14 ++++++++++++++ users/curry/README.md | 29 +++++++++++++++++++++++++++++ 2 files changed, 43 insertions(+) create mode 100644 users/curry/LICENSE.md create mode 100644 users/curry/README.md (limited to 'users') diff --git a/users/curry/LICENSE.md b/users/curry/LICENSE.md new file mode 100644 index 0000000000..198ae45b2e --- /dev/null +++ b/users/curry/LICENSE.md @@ -0,0 +1,14 @@ +Copyright 2020 Akaash Suresh casa.akaash@gmail.com @CurryFurious + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . diff --git a/users/curry/README.md b/users/curry/README.md new file mode 100644 index 0000000000..e61df51b2e --- /dev/null +++ b/users/curry/README.md @@ -0,0 +1,29 @@ +# Information + +These is my userspace files, heavily influenced by @drashna's userspace structure. + +Main uses are for corne & lily58, supporting dfu bootloader (elite-c) + +# Keyboards +## Split Common +Is compatible with split_common when the previous two keyboards update to them. + +If you want to use these keymaps with split common code, they are on my personal github fork: [CurryFurous/qmk_firmware](https://github.com/CurryFurious/qmk_firmware) + +Referenced PRs: #6260, #5998, #6001 + +## Keymaps +Keymap layout is similar between the two keyboards. Lily 58 has a lot of open keys for custom keys as well. Keymap formatting is set up in the physical layout of the keyboard, so mapping keys should be easier. + +## Tap Dances + +Tap dances are enabled but none are defined, you can add them to [tapdances.c](tapdances.c). If not using tapdances, you can disable them in the keymaps. + +## RGB +RGB is implemented pretty much the same as @drashna. Only change is that I added the RGB code from the drashna's corne [keymap.c](../../keyboards/crkbd/keymaps/drashna/keymap.c), lines 313-383 into rgb_stuff.c. + +## OLED +Similarly to RGB, I moved all OLED code into [oled.c](oled.c) to better clear up the keymap.c file. I haven't experimented with the kyria's 128x64 pixel screen so it probably won't work as well with it yet. + +## Wrappers +Have implemented QWERTY, COLEMAK Mod DH, and DVORAK. Other macros are defined, some modified from drashna's. Drashna's [wrappers.h](../drashna/wrappers.h) has other layouts that you can copy in as you see fit, make sure to add them to the userspace_layers enum in [curry.h](curry.h) -- cgit v1.2.3 From 291ef064a7dd47e91eaa438b8dd1116aee58cdff Mon Sep 17 00:00:00 2001 From: Akaash Suresh Date: Thu, 2 Jan 2020 12:19:07 -0600 Subject: Formatting --- users/curry/README.md | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'users') diff --git a/users/curry/README.md b/users/curry/README.md index e61df51b2e..70d6262d73 100644 --- a/users/curry/README.md +++ b/users/curry/README.md @@ -2,18 +2,19 @@ These is my userspace files, heavily influenced by @drashna's userspace structure. +# Keyboards + Main uses are for corne & lily58, supporting dfu bootloader (elite-c) -# Keyboards ## Split Common Is compatible with split_common when the previous two keyboards update to them. -If you want to use these keymaps with split common code, they are on my personal github fork: [CurryFurous/qmk_firmware](https://github.com/CurryFurious/qmk_firmware) +If you want to use these keymaps with split common code, they are on my personal github fork: [CurryFurious/qmk_firmware](https://github.com/CurryFurious/qmk_firmware) Referenced PRs: #6260, #5998, #6001 ## Keymaps -Keymap layout is similar between the two keyboards. Lily 58 has a lot of open keys for custom keys as well. Keymap formatting is set up in the physical layout of the keyboard, so mapping keys should be easier. +Keymap layout is similar between the two keyboards. Lily58 has a lot of open keys for custom keys as well. Keymap formatting is set up in the physical layout of the keyboard, so mapping keys should be easier. ## Tap Dances -- cgit v1.2.3 From 5b8f1327d810d7b345b8b99d4062a0aebb650f8c Mon Sep 17 00:00:00 2001 From: CurryFurious Date: Thu, 2 Jan 2020 16:26:09 -0600 Subject: Removing unnecessary struct definitions Removed userspace_config unused variables, and removed _NUMLOCK as it isn't used anywhere. --- users/curry/curry.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'users') diff --git a/users/curry/curry.h b/users/curry/curry.h index 985453c49b..a9de9ae510 100644 --- a/users/curry/curry.h +++ b/users/curry/curry.h @@ -21,7 +21,6 @@ /* Define layer names */ enum userspace_layers { _QWERTY = 0, - _NUMLOCK = 0, _COLEMAK, _DVORAK, _MODS, @@ -45,10 +44,7 @@ typedef union { uint32_t raw; struct { bool rgb_layer_change :1; - bool is_overwatch :1; bool nuke_switch :1; - uint8_t unicode_mod :4; - bool swapped_numbers :1; bool rgb_matrix_idle_anim :1; }; } userspace_config_t; -- cgit v1.2.3 From 2a7c715bc6f5774a4fa73a0a83f8c3bd44f19e22 Mon Sep 17 00:00:00 2001 From: Akaash Suresh Date: Fri, 3 Jan 2020 08:47:18 -0600 Subject: Fixed formatting and added font file --- users/curry/config.h | 2 + users/curry/glcdfont.c | 241 +++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 243 insertions(+) create mode 100644 users/curry/glcdfont.c (limited to 'users') diff --git a/users/curry/config.h b/users/curry/config.h index ac4a8f0709..45b8364e12 100644 --- a/users/curry/config.h +++ b/users/curry/config.h @@ -114,3 +114,5 @@ #ifdef LOCKING_RESYNC_ENABLE # undef LOCKING_RESYNC_ENABLE #endif + +#define OLED_FONT_H "users/curry/glcdfont.c" diff --git a/users/curry/glcdfont.c b/users/curry/glcdfont.c new file mode 100644 index 0000000000..2bfc3fac6d --- /dev/null +++ b/users/curry/glcdfont.c @@ -0,0 +1,241 @@ +#pragma once + +#ifdef __AVR__ +# include +# include +#elif defined(ESP8266) +# include +#else +# define PROGMEM +#endif + +// Corne 8x6 font with QMK Firmware Logo +// Online editor: https://helixfonteditor.netlify.com/ + +// clang-format off +const unsigned char font[] PROGMEM = { +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, +0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, +0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, +0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, +0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, +0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, +0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, +0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, +0x00, 0x18, 0x24, 0x18, 0x00, 0x00, +0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, +0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, +0x26, 0x29, 0x79, 0x29, 0x26, 0x00, +0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, +0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, +0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, +0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, +0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, +0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, +0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, +0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, +0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, +0x60, 0x60, 0x60, 0x60, 0x60, 0x00, +0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, +0x08, 0x04, 0x7E, 0x04, 0x08, 0x00, +0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, +0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, +0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, +0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, +0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, +0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, +0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, +0x00, 0x07, 0x00, 0x07, 0x00, 0x00, +0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, +0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, +0x23, 0x13, 0x08, 0x64, 0x62, 0x00, +0x36, 0x49, 0x56, 0x20, 0x50, 0x00, +0x00, 0x08, 0x07, 0x03, 0x00, 0x00, +0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, +0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, +0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, +0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, +0x00, 0x80, 0x70, 0x30, 0x00, 0x00, +0x08, 0x08, 0x08, 0x08, 0x08, 0x00, +0x00, 0x00, 0x60, 0x60, 0x00, 0x00, +0x20, 0x10, 0x08, 0x04, 0x02, 0x00, +0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, +0x00, 0x42, 0x7F, 0x40, 0x00, 0x00, +0x72, 0x49, 0x49, 0x49, 0x46, 0x00, +0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, +0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, +0x27, 0x45, 0x45,