From 47f8947bf5aa3ff1cbb484a2d6dc3fa818987700 Mon Sep 17 00:00:00 2001 From: yiancar Date: Wed, 19 Aug 2020 02:16:35 +0100 Subject: Update vusb to match 3rd endpoint. (#9020) * Update vusb to match 3rd endpoint. - With the addition of https://github.com/qmk/v-usb/pull/1 a 3rd endpoint (endpoint4) becomes available. - We can assign mouse/extrakeys to that endpoint as its a desirable feature and leave rawhid and console to compete for the 2nd endpoint. NOTE: The version of vusb.c in future branch is older than master. Just remember that it will need a #error if both raw_hid and console are enabled at the same time. * Final Fixes * Update tmk_core/protocol/vusb/vusb.c * Update tmk_core/protocol/vusb/vusb.c * Update tmk_core/protocol/vusb/usbconfig.h * Update tmk_core/protocol/vusb/usbconfig.h * Update tmk_core/protocol/vusb/usbconfig.h * Update tmk_core/protocol/vusb/usbconfig.h * Updated vusb submodule to latest commit --- tmk_core/protocol/vusb/usbconfig.h | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) (limited to 'tmk_core/protocol/vusb/usbconfig.h') diff --git a/tmk_core/protocol/vusb/usbconfig.h b/tmk_core/protocol/vusb/usbconfig.h index dcef7584c4..041f7bd095 100644 --- a/tmk_core/protocol/vusb/usbconfig.h +++ b/tmk_core/protocol/vusb/usbconfig.h @@ -85,9 +85,19 @@ section at the end of this file). /* If the so-called endpoint 3 is used, it can now be configured to any other * endpoint number (except 0) with this macro. Default if undefined is 3. */ +#define USB_CFG_HAVE_INTRIN_ENDPOINT4 1 +/* Define this to 1 if you want to compile a version with three endpoints: The + * default control endpoint 0, an interrupt-in endpoint 4 (or the number + * configured below) and a catch-all default interrupt-in endpoint as above. + * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature. + */ +#define USB_CFG_EP4_NUMBER 4 +/* If the so-called endpoint 4 is used, it can now be configured to any other + * endpoint number (except 0) with this macro. Default if undefined is 4. + */ /* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */ /* The above macro defines the startup condition for data toggling on the - * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1. + * interrupt/bulk endpoints 1, 3 and 4. Defaults to USBPID_DATA1. * Since the token is toggled BEFORE sending any data, the first packet is * sent with the oposite value of this configuration! */ @@ -100,10 +110,10 @@ section at the end of this file). #define USB_CFG_SUPPRESS_INTR_CODE 0 /* Define this to 1 if you want to declare interrupt-in endpoints, but don't * want to send any data over them. If this macro is defined to 1, functions - * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if - * you need the interrupt-in endpoints in order to comply to an interface - * (e.g. HID), but never want to send any data. This option saves a couple - * of bytes in flash memory and the transmit buffers in RAM. + * usbSetInterrupt(), usbSetInterrupt3() and usbSetInterrupt4() are omitted. + * This is useful if you need the interrupt-in endpoints in order to comply + * to an interface (e.g. HID), but never want to send any data. This option + * saves a couple of bytes in flash memory and the transmit buffers in RAM. */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the -- cgit v1.2.3