From d4be07dad368c57669c88ead6c093c9e23086855 Mon Sep 17 00:00:00 2001 From: a-chol Date: Sat, 25 Jul 2020 14:01:15 +0200 Subject: Hid joystick interface (#4226) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit * add support for hid gamepad interface add documentation for HID joystick Add joystick_task to read analog axes values even when no key is pressed or release. update doc Update docs/feature_joystick.md Manage pin setup and read to maintain matrix scan after analog read * Incorporates patches and changes to HID reporting There are some patches provided by @a-chol incorporated on this commit, and also some changes I made to the HID Report structure. The most interesting is the one dealing with number of buttons: Linux doesn't seem to care, but Windows requires the HID structure to be byte aligned (that's in the spec). So if one declares 8/16/32... buttons they should not have any issues, but this is what happens when you have 9 buttons: ``` bits |0|1|2|3|4|5|6|7| |*|*|*|*|*|*|*|*| axis 0 (report size 8) |*|*|*|*|*|*|*|*| ... |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| axis 6 |*|*|*|*|*|*|*|*| first 8 buttons (report size 1) |*| | | | | | | | last of 9 buttons, not aligned ``` So for that I added a conditonal that will add a number of reports with size 1 to make sure it aligns to the next multiple of 8. Those reports send dummy inputs that don't do anything aside from aligning the data. Tested on Linux, Windows 10 and Street Fighter (where the joystick is recognized as direct-input) * Add save and restore of each pin used in reading joystick (AVR). Allow output pin to be JS_VIRTUAL_AXIS if the axis is connected to Vcc instead of an output pin from the MCU. Fix joystick report id Fix broken v-usb hid joystick interface. Make it more resilient to unusual settings (none multiple of eight button count, 0 buttons or 0 axes) Correct adc reading for multiple axes. Piecewise range conversion for uncentered raw value range. Input, output and ground pin configuration per axis. Documentation fixes * Fix port addressing for joystick analog read * The other required set of changes As per the PR, the changes still holding it up. Add onekey for testing. Fix ARM builds. Fix device descriptor when either axes or buttons is zero. Add compile-time check for at least one axis or button. Move definition to try to fix conflict. PR review comments. qmk cformat * avoid float functions to compute range mapping for axis adc reading * Remove V-USB support for now. Updated docs accordingly. * Update tmk_core/protocol/lufa/lufa.c Co-Authored-By: Ryan * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan * Add support for joystick adc reading for stm32 MCUs. Fix joystick hid report sending for chibios * Fix HID joystick report sending for ChibiOS. Add one analog axis to the onekey:joystick keymap. Fix pin state save and restore during joystick analog read for STM32 MCUs. * Update tmk_core/protocol/chibios/usb_main.c Co-Authored-By: Ryan * Update tmk_core/protocol/lufa/lufa.c Co-Authored-By: Ryan * Add missing mcuconf.h and halconf.h to onekey:joystick keymap. Add suggested fixes from PR. * Switch saveState and restoreState signature to use pin_t type. onekey:joystick : add a second axis, virtual and programmatically animated. * Update docs/feature_joystick.md Co-Authored-By: Ryan * Update docs/feature_joystick.md Co-Authored-By: Ryan * Add PR corrections * Remove halconf.h and mcuconf.h from onekey keymaps * Change ADC_PIN to A0 Co-authored-by: achol Co-authored-by: José Júnior Co-authored-by: a-chol Co-authored-by: Nick Brassel Co-authored-by: Ryan --- tmk_core/protocol/chibios/usb_main.c | 69 ++++++++++++++++++++++++++++++++++++ 1 file changed, 69 insertions(+) (limited to 'tmk_core/protocol/chibios') diff --git a/tmk_core/protocol/chibios/usb_main.c b/tmk_core/protocol/chibios/usb_main.c index 21e9f14e50..68c61cf550 100644 --- a/tmk_core/protocol/chibios/usb_main.c +++ b/tmk_core/protocol/chibios/usb_main.c @@ -47,6 +47,10 @@ extern keymap_config_t keymap_config; #endif +#ifdef JOYSTICK_ENABLE +# include "joystick.h" +#endif + /* --------------------------------------------------------- * Global interface variables and declarations * --------------------------------------------------------- @@ -246,6 +250,9 @@ typedef struct { #endif #ifdef VIRTSER_ENABLE usb_driver_config_t serial_driver; +#endif +#ifdef JOYSTICK_ENABLE + usb_driver_config_t joystick_driver; #endif }; usb_driver_config_t array[0]; @@ -283,6 +290,14 @@ static usb_driver_configs_t drivers = { # define CDC_OUT_MODE USB_EP_MODE_TYPE_BULK .serial_driver = QMK_USB_DRIVER_CONFIG(CDC, CDC_NOTIFICATION_EPNUM, false), #endif + +#ifdef JOYSTICK_ENABLE +# define JOYSTICK_IN_CAPACITY 4 +# define JOYSTICK_OUT_CAPACITY 4 +# define JOYSTICK_IN_MODE USB_EP_MODE_TYPE_BULK +# define JOYSTICK_OUT_MODE USB_EP_MODE_TYPE_BULK + .joystick_driver = QMK_USB_DRIVER_CONFIG(JOYSTICK, 0, false), +#endif }; #define NUM_USB_DRIVERS (sizeof(drivers) / sizeof(usb_driver_config_t)) @@ -867,3 +882,57 @@ void virtser_task(void) { } #endif + +#ifdef JOYSTICK_ENABLE + +void send_joystick_packet(joystick_t *joystick) { + joystick_report_t rep = { +# if JOYSTICK_AXES_COUNT > 0 + .axes = {joystick->axes[0], + +# if JOYSTICK_AXES_COUNT >= 2 + joystick->axes[1], +# endif +# if JOYSTICK_AXES_COUNT >= 3 + joystick->axes[2], +# endif +# if JOYSTICK_AXES_COUNT >= 4 + joystick->axes[3], +# endif +# if JOYSTICK_AXES_COUNT >= 5 + joystick->axes[4], +# endif +# if JOYSTICK_AXES_COUNT >= 6 + joystick->axes[5], +# endif + }, +# endif // JOYSTICK_AXES_COUNT>0 + +# if JOYSTICK_BUTTON_COUNT > 0 + .buttons = {joystick->buttons[0], + +# if JOYSTICK_BUTTON_COUNT > 8 + joystick->buttons[1], +# endif +# if JOYSTICK_BUTTON_COUNT > 16 + joystick->buttons[2], +# endif +# if JOYSTICK_BUTTON_COUNT > 24 + joystick->buttons[3], +# endif + } +# endif // JOYSTICK_BUTTON_COUNT>0 + }; + + // chnWrite(&drivers.joystick_driver.driver, (uint8_t *)&rep, sizeof(rep)); + osalSysLock(); + if (usbGetDriverStateI(&USB_DRIVER) != USB_ACTIVE) { + osalSysUnlock(); + return; + } + + usbStartTransmitI(&USB_DRIVER, JOYSTICK_IN_EPNUM, (uint8_t *)&rep, sizeof(joystick_report_t)); + osalSysUnlock(); +} + +#endif -- cgit v1.2.3