From b624f32f944acdc59dcb130674c09090c5c404cb Mon Sep 17 00:00:00 2001
From: skullY <skullydazed@gmail.com>
Date: Fri, 30 Aug 2019 11:19:03 -0700
Subject: clang-format changes

---
 tmk_core/common/avr/suspend.c | 171 ++++++++++++++++++++----------------------
 1 file changed, 80 insertions(+), 91 deletions(-)

(limited to 'tmk_core/common/avr/suspend.c')

diff --git a/tmk_core/common/avr/suspend.c b/tmk_core/common/avr/suspend.c
index 2259201b5d..574000fcd8 100644
--- a/tmk_core/common/avr/suspend.c
+++ b/tmk_core/common/avr/suspend.c
@@ -13,37 +13,36 @@
 #include "rgblight_reconfig.h"
 
 #ifdef PROTOCOL_LUFA
-	#include "lufa.h"
+#    include "lufa.h"
 #endif
 
 #ifdef AUDIO_ENABLE
-    #include "audio.h"
+#    include "audio.h"
 #endif /* AUDIO_ENABLE */
 
 #if defined(RGBLIGHT_SLEEP) && defined(RGBLIGHT_ENABLE)
-  #include "rgblight.h"
-  extern rgblight_config_t rgblight_config;
-  static bool rgblight_enabled;
-  static bool is_suspended;
+#    include "rgblight.h"
+extern rgblight_config_t rgblight_config;
+static bool              rgblight_enabled;
+static bool              is_suspended;
 #endif
 
-
-#define wdt_intr_enable(value)   \
-__asm__ __volatile__ (  \
-    "in __tmp_reg__,__SREG__" "\n\t"    \
-    "cli" "\n\t"    \
-    "wdr" "\n\t"    \
-    "sts %0,%1" "\n\t"  \
-    "out __SREG__,__tmp_reg__" "\n\t"   \
-    "sts %0,%2" "\n\t" \
-    : /* no outputs */  \
-    : "M" (_SFR_MEM_ADDR(_WD_CONTROL_REG)), \
-    "r" (_BV(_WD_CHANGE_BIT) | _BV(WDE)), \
-    "r" ((uint8_t) ((value & 0x08 ? _WD_PS3_MASK : 0x00) | \
-        _BV(WDIE) | (value & 0x07)) ) \
-    : "r0"  \
-)
-
+#define wdt_intr_enable(value)                                                                                                                                                         \
+    __asm__ __volatile__("in __tmp_reg__,__SREG__"                                                                                                                                     \
+                         "\n\t"                                                                                                                                                        \
+                         "cli"                                                                                                                                                         \
+                         "\n\t"                                                                                                                                                        \
+                         "wdr"                                                                                                                                                         \
+                         "\n\t"                                                                                                                                                        \
+                         "sts %0,%1"                                                                                                                                                   \
+                         "\n\t"                                                                                                                                                        \
+                         "out __SREG__,__tmp_reg__"                                                                                                                                    \
+                         "\n\t"                                                                                                                                                        \
+                         "sts %0,%2"                                                                                                                                                   \
+                         "\n\t"                                                                                                                                                        \
+                         : /* no outputs */                                                                                                                                            \
+                         : "M"(_SFR_MEM_ADDR(_WD_CONTROL_REG)), "r"(_BV(_WD_CHANGE_BIT) | _BV(WDE)), "r"((uint8_t)((value & 0x08 ? _WD_PS3_MASK : 0x00) | _BV(WDIE) | (value & 0x07))) \
+                         : "r0")
 
 /** \brief Suspend idle
  *
@@ -58,23 +57,18 @@ void suspend_idle(uint8_t time) {
     sleep_disable();
 }
 
-
 // TODO: This needs some cleanup
 
 /** \brief Run keyboard level Power down
  *
  * FIXME: needs doc
  */
-__attribute__ ((weak))
-void suspend_power_down_user (void) { }
+__attribute__((weak)) void suspend_power_down_user(void) {}
 /** \brief Run keyboard level Power down
  *
  * FIXME: needs doc
  */
-__attribute__ ((weak))
-void suspend_power_down_kb(void) {
-  suspend_power_down_user();
-}
+__attribute__((weak)) void suspend_power_down_kb(void) { suspend_power_down_user(); }
 
 #ifndef NO_SUSPEND_POWER_DOWN
 /** \brief Power down MCU with watchdog timer
@@ -98,43 +92,43 @@ static uint8_t wdt_timeout = 0;
  * FIXME: needs doc
  */
 static void power_down(uint8_t wdto) {
-#ifdef PROTOCOL_LUFA
-  if (USB_DeviceState == DEVICE_STATE_Configured) return;
-#endif
-  wdt_timeout = wdto;
-
-  // Watchdog Interrupt Mode
-  wdt_intr_enable(wdto);
-
-#ifdef BACKLIGHT_ENABLE
-  backlight_set(0);
-#endif
-
-  // Turn off LED indicators
-  uint8_t leds_off = 0;
-#if defined(BACKLIGHT_CAPS_LOCK) && defined(BACKLIGHT_ENABLE)
-  if (is_backlight_enabled()) {
-    // Don't try to turn off Caps Lock indicator as it is backlight and backlight is already off
-    leds_off |= (1<<USB_LED_CAPS_LOCK);
-  }
-#endif
-  led_set(leds_off);
-
-#ifdef AUDIO_ENABLE
-  // This sometimes disables the start-up noise, so it's been disabled
-  // stop_all_notes();
-#endif /* AUDIO_ENABLE */
-#if defined(RGBLIGHT_SLEEP) && defined(RGBLIGHT_ENABLE)
-#ifdef RGBLIGHT_ANIMATIONS
-  rgblight_timer_disable();
-#endif
-  if (!is_suspended) {
-    is_suspended = true;
-    rgblight_enabled = rgblight_config.enable;
-    rgblight_disable_noeeprom();
-  }
-#endif
-  suspend_power_down_kb();
+#    ifdef PROTOCOL_LUFA
+    if (USB_DeviceState == DEVICE_STATE_Configured) return;
+#    endif
+    wdt_timeout = wdto;
+
+    // Watchdog Interrupt Mode
+    wdt_intr_enable(wdto);
+
+#    ifdef BACKLIGHT_ENABLE
+    backlight_set(0);
+#    endif
+
+    // Turn off LED indicators
+    uint8_t leds_off = 0;
+#    if defined(BACKLIGHT_CAPS_LOCK) && defined(BACKLIGHT_ENABLE)
+    if (is_backlight_enabled()) {
+        // Don't try to turn off Caps Lock indicator as it is backlight and backlight is already off
+        leds_off |= (1 << USB_LED_CAPS_LOCK);
+    }
+#    endif
+    led_set(leds_off);
+
+#    ifdef AUDIO_ENABLE
+    // This sometimes disables the start-up noise, so it's been disabled
+    // stop_all_notes();
+#    endif /* AUDIO_ENABLE */
+#    if defined(RGBLIGHT_SLEEP) && defined(RGBLIGHT_ENABLE)
+#        ifdef RGBLIGHT_ANIMATIONS
+    rgblight_timer_disable();
+#        endif
+    if (!is_suspended) {
+        is_suspended     = true;
+        rgblight_enabled = rgblight_config.enable;
+        rgblight_disable_noeeprom();
+    }
+#    endif
+    suspend_power_down_kb();
 
     // TODO: more power saving
     // See PicoPower application note
@@ -158,40 +152,36 @@ static void power_down(uint8_t wdto) {
  * FIXME: needs doc
  */
 void suspend_power_down(void) {
-	suspend_power_down_kb();
+    suspend_power_down_kb();
 
 #ifndef NO_SUSPEND_POWER_DOWN
     power_down(WDTO_15MS);
 #endif
 }
 
-__attribute__ ((weak)) void matrix_power_up(void) {}
-__attribute__ ((weak)) void matrix_power_down(void) {}
-bool suspend_wakeup_condition(void) {
+__attribute__((weak)) void matrix_power_up(void) {}
+__attribute__((weak)) void matrix_power_down(void) {}
+bool                       suspend_wakeup_condition(void) {
     matrix_power_up();
     matrix_scan();
     matrix_power_down();
     for (uint8_t r = 0; r < MATRIX_ROWS; r++) {
         if (matrix_get_row(r)) return true;
     }
-     return false;
+    return false;
 }
 
 /** \brief run user level code immediately after wakeup
  *
  * FIXME: needs doc
  */
-__attribute__ ((weak))
-void suspend_wakeup_init_user(void) { }
+__attribute__((weak)) void suspend_wakeup_init_user(void) {}
 
 /** \brief run keyboard level code immediately after wakeup
  *
  * FIXME: needs doc
  */
-__attribute__ ((weak))
-void suspend_wakeup_init_kb(void) {
-  suspend_wakeup_init_user();
-}
+__attribute__((weak)) void suspend_wakeup_init_kb(void) { suspend_wakeup_init_user(); }
 /** \brief run immediately after wakeup
  *
  * FIXME: needs doc
@@ -202,18 +192,18 @@ void suspend_wakeup_init(void) {
 #ifdef BACKLIGHT_ENABLE
     backlight_init();
 #endif
-	led_set(host_keyboard_leds());
+    led_set(host_keyboard_leds());
 #if defined(RGBLIGHT_SLEEP) && defined(RGBLIGHT_ENABLE)
-  is_suspended = false;
-  if (rgblight_enabled) {
-    #ifdef BOOTLOADER_TEENSY
-      wait_ms(10);
-    #endif
-    rgblight_enable_noeeprom();
-  }
-#ifdef RGBLIGHT_ANIMATIONS
-  rgblight_timer_enable();
-#endif
+    is_suspended = false;
+    if (rgblight_enabled) {
+#    ifdef BOOTLOADER_TEENSY
+        wait_ms(10);
+#    endif
+        rgblight_enable_noeeprom();
+    }
+#    ifdef RGBLIGHT_ANIMATIONS
+    rgblight_timer_enable();
+#    endif
 #endif
     suspend_wakeup_init_kb();
 }
@@ -226,8 +216,7 @@ ISR(WDT_vect) {
         case WDTO_15MS:
             timer_count += 15 + 2;  // WDTO_15MS + 2(from observation)
             break;
-        default:
-            ;
+        default:;
     }
 }
 #endif
-- 
cgit v1.2.3