From 0656f2fa10e25e160617c3e5d14cfbae35dd9c8d Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Fri, 29 Apr 2016 22:19:40 -0400 Subject: moves backlight functionality to keyboard files and updates template makefile previously there were two backlight.c files (bad) --- quantum/template/template.c | 61 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) (limited to 'quantum/template/template.c') diff --git a/quantum/template/template.c b/quantum/template/template.c index cc52e496ff..6050a2d20c 100644 --- a/quantum/template/template.c +++ b/quantum/template/template.c @@ -46,3 +46,64 @@ void led_set_kb(uint8_t usb_led) { led_set_user(usb_led); } + +#ifdef BACKLIGHT_ENABLE +#define CHANNEL OCR1C + +void backlight_init_ports() +{ + + // Setup PB7 as output and output low. + DDRB |= (1<<7); + PORTB &= ~(1<<7); + + // Use full 16-bit resolution. + ICR1 = 0xFFFF; + + // I could write a wall of text here to explain... but TL;DW + // Go read the ATmega32u4 datasheet. + // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on + + // Pin PB7 = OCR1C (Timer 1, Channel C) + // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0 + // (i.e. start high, go low when counter matches.) + // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0 + // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1 + + TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010; + TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001; + + backlight_init(); +} + +void backlight_set(uint8_t level) +{ + if ( level == 0 ) + { + // Turn off PWM control on PB7, revert to output low. + TCCR1A &= ~(_BV(COM1C1)); + CHANNEL = 0x0; + // Prevent backlight blink on lowest level + PORTB &= ~(_BV(PORTB7)); + } + else if ( level == BACKLIGHT_LEVELS ) + { + // Prevent backlight blink on lowest level + PORTB &= ~(_BV(PORTB7)); + // Turn on PWM control of PB7 + TCCR1A |= _BV(COM1C1); + // Set the brightness + CHANNEL = 0xFFFF; + } + else + { + // Prevent backlight blink on lowest level + PORTB &= ~(_BV(PORTB7)); + // Turn on PWM control of PB7 + TCCR1A |= _BV(COM1C1); + // Set the brightness + CHANNEL = 0xFFFF >> ((BACKLIGHT_LEVELS - level) * ((BACKLIGHT_LEVELS + 1) / 2)); + } +} + +#endif \ No newline at end of file -- cgit v1.2.3 From 1a8c0dd22d6a2255511d0db6a456315541b5815b Mon Sep 17 00:00:00 2001 From: Erez Zukerman Date: Sun, 15 May 2016 00:27:32 -0400 Subject: Leader key implementation (#326) * implements leader key for planck experimental * allows override of leader timeout * adds ability to use the leader key in seq * fixes leader keycode * adds chording prototype * fixes keycode detection * moves music mode to quantum.c * disables chording by default * updates process_action functions to return bool --- quantum/template/template.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'quantum/template/template.c') diff --git a/quantum/template/template.c b/quantum/template/template.c index 6050a2d20c..649072eb2e 100644 --- a/quantum/template/template.c +++ b/quantum/template/template.c @@ -11,8 +11,9 @@ void matrix_scan_user(void) { } __attribute__ ((weak)) -void process_action_user(keyrecord_t *record) { +bool process_action_user(keyrecord_t *record) { // leave this function blank - it can be defined in a keymap file + return true; } __attribute__ ((weak)) @@ -34,11 +35,11 @@ void matrix_scan_kb(void) { matrix_scan_user(); } -void process_action_kb(keyrecord_t *record) { +bool process_action_kb(keyrecord_t *record) { // put your per-action keyboard code here // runs for every action, just before processing by the firmware - process_action_user(record); + return process_action_user(record); } void led_set_kb(uint8_t usb_led) { -- cgit v1.2.3 From 13bb6b4b7fdd2b3e419d0f89c93fb980b00eeb9b Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Thu, 23 Jun 2016 22:18:20 -0400 Subject: Backlight abstraction and other changes (#439) * redoes matrix pins, abstracts backlight code for B5,6,7 * slimming down keyboard stuff, backlight breathing implemented * don't call backlight init when no pin * cleans up user/kb/quantum calls, keyboard files * fix pvc atomic * replaces CHANNEL with correct var in breathing * removes .hexs, updates readmes, updates template * cleans-up clueboards, readmes to lowercase * updates readme --- quantum/template/template.c | 84 +-------------------------------------------- 1 file changed, 1 insertion(+), 83 deletions(-) (limited to 'quantum/template/template.c') diff --git a/quantum/template/template.c b/quantum/template/template.c index 649072eb2e..dcc4b0a221 100644 --- a/quantum/template/template.c +++ b/quantum/template/template.c @@ -1,26 +1,5 @@ #include "%KEYBOARD%.h" -__attribute__ ((weak)) -void matrix_init_user(void) { - // leave this function blank - it can be defined in a keymap file -}; - -__attribute__ ((weak)) -void matrix_scan_user(void) { - // leave this function blank - it can be defined in a keymap file -} - -__attribute__ ((weak)) -bool process_action_user(keyrecord_t *record) { - // leave this function blank - it can be defined in a keymap file - return true; -} - -__attribute__ ((weak)) -void led_set_user(uint8_t usb_led) { - // leave this function blank - it can be defined in a keymap file -} - void matrix_init_kb(void) { // put your keyboard start-up code here // runs once when the firmware starts up @@ -35,7 +14,7 @@ void matrix_scan_kb(void) { matrix_scan_user(); } -bool process_action_kb(keyrecord_t *record) { +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { // put your per-action keyboard code here // runs for every action, just before processing by the firmware @@ -47,64 +26,3 @@ void led_set_kb(uint8_t usb_led) { led_set_user(usb_led); } - -#ifdef BACKLIGHT_ENABLE -#define CHANNEL OCR1C - -void backlight_init_ports() -{ - - // Setup PB7 as output and output low. - DDRB |= (1<<7); - PORTB &= ~(1<<7); - - // Use full 16-bit resolution. - ICR1 = 0xFFFF; - - // I could write a wall of text here to explain... but TL;DW - // Go read the ATmega32u4 datasheet. - // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on - - // Pin PB7 = OCR1C (Timer 1, Channel C) - // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0 - // (i.e. start high, go low when counter matches.) - // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0 - // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1 - - TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010; - TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001; - - backlight_init(); -} - -void backlight_set(uint8_t level) -{ - if ( level == 0 ) - { - // Turn off PWM control on PB7, revert to output low. - TCCR1A &= ~(_BV(COM1C1)); - CHANNEL = 0x0; - // Prevent backlight blink on lowest level - PORTB &= ~(_BV(PORTB7)); - } - else if ( level == BACKLIGHT_LEVELS ) - { - // Prevent backlight blink on lowest level - PORTB &= ~(_BV(PORTB7)); - // Turn on PWM control of PB7 - TCCR1A |= _BV(COM1C1); - // Set the brightness - CHANNEL = 0xFFFF; - } - else - { - // Prevent backlight blink on lowest level - PORTB &= ~(_BV(PORTB7)); - // Turn on PWM control of PB7 - TCCR1A |= _BV(COM1C1); - // Set the brightness - CHANNEL = 0xFFFF >> ((BACKLIGHT_LEVELS - level) * ((BACKLIGHT_LEVELS + 1) / 2)); - } -} - -#endif \ No newline at end of file -- cgit v1.2.3 From 589df84d6cd19ad7d776cc19bcddade1cd178ddc Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Thu, 7 Jul 2016 09:58:44 -0400 Subject: corrects quantum template --- quantum/template/template.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'quantum/template/template.c') diff --git a/quantum/template/template.c b/quantum/template/template.c index dcc4b0a221..3057557eae 100644 --- a/quantum/template/template.c +++ b/quantum/template/template.c @@ -18,7 +18,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) { // put your per-action keyboard code here // runs for every action, just before processing by the firmware - return process_action_user(record); + return process_record_user(record); } void led_set_kb(uint8_t usb_led) { -- cgit v1.2.3 From c1dfb636ef61159456bdb24f4fee3f27e5babbeb Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Thu, 7 Jul 2016 12:22:10 -0400 Subject: fixes quantum template (actually) --- quantum/template/template.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'quantum/template/template.c') diff --git a/quantum/template/template.c b/quantum/template/template.c index 3057557eae..5ef349583c 100644 --- a/quantum/template/template.c +++ b/quantum/template/template.c @@ -18,7 +18,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) { // put your per-action keyboard code here // runs for every action, just before processing by the firmware - return process_record_user(record); + return process_record_user(keycode, record); } void led_set_kb(uint8_t usb_led) { -- cgit v1.2.3