From b708658e2ea184402f6fad152c7596cbb40df508 Mon Sep 17 00:00:00 2001 From: Sergey Vlasov Date: Mon, 3 Jul 2023 01:53:54 +0300 Subject: usbpd_stm32g4: Configure UCPD before disabling the dead battery mode (#21430) --- platforms/chibios/drivers/usbpd_stm32g4.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'platforms/chibios') diff --git a/platforms/chibios/drivers/usbpd_stm32g4.c b/platforms/chibios/drivers/usbpd_stm32g4.c index 0096f22f07..21b8f6db95 100644 --- a/platforms/chibios/drivers/usbpd_stm32g4.c +++ b/platforms/chibios/drivers/usbpd_stm32g4.c @@ -22,8 +22,6 @@ // Initialises the USBPD subsystem __attribute__((weak)) void usbpd_init(void) { - // Disable dead-battery signals - PWR->CR3 |= PWR_CR3_UCPD_DBDIS; // Enable the clock for the UCPD1 peripheral RCC->APB1ENR2 |= RCC_APB1ENR2_UCPD1EN; @@ -46,6 +44,11 @@ __attribute__((weak)) void usbpd_init(void) { CR |= UCPD_CR_ANAMODE | UCPD_CR_CCENABLE_Msk; // Apply the changes UCPD1->CR = CR; + + // Disable dead-battery signals only after UCPD1 is configured to ensure + // that the transition does not go through any intermediate state without + // any pull-down resistance. + PWR->CR3 |= PWR_CR3_UCPD_DBDIS; } // Gets the current state of the USBPD allowance -- cgit v1.2.3