From 3bf2403244b035e982dec17680b836afbe5df603 Mon Sep 17 00:00:00 2001
From: Joel Challis <git@zvecr.com>
Date: Thu, 2 Dec 2021 14:32:31 +0000
Subject: Tidy up existing i2c_master implementations (#15376)

* Move chibios defines out of header

* Make some avr defines internal
---
 platforms/chibios/drivers/i2c_master.c | 59 ++++++++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)

(limited to 'platforms/chibios/drivers/i2c_master.c')

diff --git a/platforms/chibios/drivers/i2c_master.c b/platforms/chibios/drivers/i2c_master.c
index 43591d56f8..4a5d4760d0 100644
--- a/platforms/chibios/drivers/i2c_master.c
+++ b/platforms/chibios/drivers/i2c_master.c
@@ -27,8 +27,67 @@
 #include "quantum.h"
 #include "i2c_master.h"
 #include <string.h>
+#include <ch.h>
 #include <hal.h>
 
+#ifndef I2C1_SCL_PIN
+#    define I2C1_SCL_PIN B6
+#endif
+#ifndef I2C1_SDA_PIN
+#    define I2C1_SDA_PIN B7
+#endif
+
+#ifdef USE_I2CV1
+#    ifndef I2C1_OPMODE
+#        define I2C1_OPMODE OPMODE_I2C
+#    endif
+#    ifndef I2C1_CLOCK_SPEED
+#        define I2C1_CLOCK_SPEED 100000 /* 400000 */
+#    endif
+#    ifndef I2C1_DUTY_CYCLE
+#        define I2C1_DUTY_CYCLE STD_DUTY_CYCLE /* FAST_DUTY_CYCLE_2 */
+#    endif
+#else
+// The default timing values below configures the I2C clock to 400khz assuming a 72Mhz clock
+// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
+#    ifndef I2C1_TIMINGR_PRESC
+#        define I2C1_TIMINGR_PRESC 0U
+#    endif
+#    ifndef I2C1_TIMINGR_SCLDEL
+#        define I2C1_TIMINGR_SCLDEL 7U
+#    endif
+#    ifndef I2C1_TIMINGR_SDADEL
+#        define I2C1_TIMINGR_SDADEL 0U
+#    endif
+#    ifndef I2C1_TIMINGR_SCLH
+#        define I2C1_TIMINGR_SCLH 38U
+#    endif
+#    ifndef I2C1_TIMINGR_SCLL
+#        define I2C1_TIMINGR_SCLL 129U
+#    endif
+#endif
+
+#ifndef I2C_DRIVER
+#    define I2C_DRIVER I2CD1
+#endif
+
+#ifdef USE_GPIOV1
+#    ifndef I2C1_SCL_PAL_MODE
+#        define I2C1_SCL_PAL_MODE PAL_MODE_ALTERNATE_OPENDRAIN
+#    endif
+#    ifndef I2C1_SDA_PAL_MODE
+#        define I2C1_SDA_PAL_MODE PAL_MODE_ALTERNATE_OPENDRAIN
+#    endif
+#else
+// The default PAL alternate modes are used to signal that the pins are used for I2C
+#    ifndef I2C1_SCL_PAL_MODE
+#        define I2C1_SCL_PAL_MODE 4
+#    endif
+#    ifndef I2C1_SDA_PAL_MODE
+#        define I2C1_SDA_PAL_MODE 4
+#    endif
+#endif
+
 static uint8_t i2c_address;
 
 static const I2CConfig i2cconfig = {
-- 
cgit v1.2.3