From d7173967087e022d20d1f9c812b1b668e9d3f71b Mon Sep 17 00:00:00 2001 From: Stefan Kerkmann Date: Thu, 30 Jun 2022 13:19:27 +0200 Subject: [Core] Add Raspberry Pi RP2040 support (#14877) * Disable RESET keycode because of naming conflicts * Add Pico SDK as submodule * Add RP2040 build support to QMK * Adjust USB endpoint structs for RP2040 * Add RP2040 bootloader and double-tap reset routine * Add generic and pro micro RP2040 boards * Add RP2040 onekey keyboard * Add WS2812 PIO DMA enabled driver and documentation Supports regular and open-drain output configuration. RP2040 GPIOs are sadly not 5V tolerant, so this is a bit use-less or needs extra hardware or you take the risk to fry your hardware. * Adjust SIO Driver for RP2040 * Adjust I2C Driver for RP2040 * Adjust SPI Driver for RP2040 * Add PIO serial driver and documentation * Add general RP2040 documentation * Apply suggestions from code review Co-authored-by: Nick Brassel Co-authored-by: Nick Brassel --- .../GENERIC_PROMICRO_RP2040/configs/config.h | 62 ++++++++++++++++++++++ 1 file changed, 62 insertions(+) create mode 100644 platforms/chibios/boards/GENERIC_PROMICRO_RP2040/configs/config.h (limited to 'platforms/chibios/boards/GENERIC_PROMICRO_RP2040/configs/config.h') diff --git a/platforms/chibios/boards/GENERIC_PROMICRO_RP2040/configs/config.h b/platforms/chibios/boards/GENERIC_PROMICRO_RP2040/configs/config.h new file mode 100644 index 0000000000..7fe9b654e1 --- /dev/null +++ b/platforms/chibios/boards/GENERIC_PROMICRO_RP2040/configs/config.h @@ -0,0 +1,62 @@ +// Copyright 2022 Stefan Kerkmann +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +/**====================== + ** I2C Driver + *========================**/ + +#if !defined(I2C_DRIVER) +# define I2C_DRIVER I2CD2 +#endif + +#if !defined(I2C1_SDA_PIN) +# define I2C1_SDA_PIN GP2 +#endif + +#if !defined(I2C1_SCL_PIN) +# define I2C1_SCL_PIN GP3 +#endif + +/**====================== + ** SPI Driver + *========================**/ + +#if !defined(SPI_DRIVER) +# define SPI_DRIVER SPID0 +#endif + +#if !defined(SPI_SCK_PIN) +# define SPI_SCK_PIN GP18 +#endif + +#if !defined(SPI_MISO_PIN) +# define SPI_MISO_PIN GP20 +#endif + +#if !defined(SPI_MOSI_PIN) +# define SPI_MOSI_PIN GP19 +#endif + +/**====================== + ** SERIAL Driver + *========================**/ + +#if !defined(SERIAL_USART_DRIVER) +# define SERIAL_USART_DRIVER SIOD0 +#endif + +#if !defined(SERIAL_USART_TX_PIN) && !defined(SOFT_SERIAL_PIN) +# define SERIAL_USART_TX_PIN GP0 +#endif + +#if !defined(SERIAL_USART_RX_PIN) +# define SERIAL_USART_RX_PIN GP1 +#endif + +/**====================== + ** Double-tap + *========================**/ + +#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET -- cgit v1.2.3