From b16091659cc9a724a8800f77e631643b4ab089ad Mon Sep 17 00:00:00 2001 From: Ryan Date: Wed, 18 Aug 2021 18:20:25 +1000 Subject: Move USB Host Shield and Arduino core to `lib/` (#13973) --- .../USB_Host_Shield_2.0/examples/PSBuzz/PSBuzz.ino | 49 ++++++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 lib/usbhost/USB_Host_Shield_2.0/examples/PSBuzz/PSBuzz.ino (limited to 'lib/usbhost/USB_Host_Shield_2.0/examples/PSBuzz') diff --git a/lib/usbhost/USB_Host_Shield_2.0/examples/PSBuzz/PSBuzz.ino b/lib/usbhost/USB_Host_Shield_2.0/examples/PSBuzz/PSBuzz.ino new file mode 100644 index 0000000000..6ee462c1eb --- /dev/null +++ b/lib/usbhost/USB_Host_Shield_2.0/examples/PSBuzz/PSBuzz.ino @@ -0,0 +1,49 @@ +/* + Example sketch for the Playstation Buzz library - developed by Kristian Lauszus + For more information visit my blog: http://blog.tkjelectronics.dk/ or + send me an e-mail: kristianl@tkjelectronics.com + */ + +#include + +// Satisfy the IDE, which needs to see the include statment in the ino too. +#ifdef dobogusinclude +#include +#include +#endif + +USB Usb; +PSBuzz Buzz(&Usb); + +void setup() { + Serial.begin(115200); +#if !defined(__MIPSEL__) + while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection +#endif + if (Usb.Init() == -1) { + Serial.print(F("\r\nOSC did not start")); + while (1); // Halt + } + Serial.println(F("\r\nPS Buzz Library Started")); +} + +void loop() { + Usb.Task(); + + if (Buzz.connected()) { + for (uint8_t i = 0; i < 4; i++) { + if (Buzz.getButtonClick(RED, i)) { + Buzz.setLedToggle(i); // Toggle the LED + Serial.println(F("RED")); + } + if (Buzz.getButtonClick(YELLOW, i)) + Serial.println(F("YELLOW")); + if (Buzz.getButtonClick(GREEN, i)) + Serial.println(F("GREEN")); + if (Buzz.getButtonClick(ORANGE, i)) + Serial.println(F("ORANGE")); + if (Buzz.getButtonClick(BLUE, i)) + Serial.println(F("BLUE")); + } + } +} -- cgit v1.2.3