From b16091659cc9a724a8800f77e631643b4ab089ad Mon Sep 17 00:00:00 2001 From: Ryan Date: Wed, 18 Aug 2021 18:20:25 +1000 Subject: Move USB Host Shield and Arduino core to `lib/` (#13973) --- lib/usbhost/USB_Host_Shield_2.0/WiiCameraReadme.md | 13 +++++++++++++ 1 file changed, 13 insertions(+) create mode 100644 lib/usbhost/USB_Host_Shield_2.0/WiiCameraReadme.md (limited to 'lib/usbhost/USB_Host_Shield_2.0/WiiCameraReadme.md') diff --git a/lib/usbhost/USB_Host_Shield_2.0/WiiCameraReadme.md b/lib/usbhost/USB_Host_Shield_2.0/WiiCameraReadme.md new file mode 100644 index 0000000000..8577d73fb3 --- /dev/null +++ b/lib/usbhost/USB_Host_Shield_2.0/WiiCameraReadme.md @@ -0,0 +1,13 @@ +Please see for the complete capabilities of the Wii camera. The IR camera code was written based on the above website and with support from Kristian Lauszus. + +This library is large, if you run into memory problems when uploading to the Arduino, disable serial debugging. + +To enable the IR camera code, simply set ```ENABLE_WII_IR_CAMERA``` to 1 in [settings.h](settings.h). + +This library implements the following settings: + +* Report sensitivity mode: 00 00 00 00 00 00 90 00 41 40 00 Suggested by inio (high sensitivity) +* Data Format: Extended mode (0x03). Full mode is not working yet. The output reports 0x3e and 0x3f need tampering with + * In this mode the camera outputs x and y coordinates and a size dimension for the 4 brightest points. + +Again, read through to get an understanding of the camera and its settings. -- cgit v1.2.3