From cf4575b94a3c65e6535a159fc71fc885aebc2620 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Fri, 2 Aug 2019 14:02:40 -0700 Subject: Fix the LUFA lib to use a submodule instead of just files (#6245) * Remove LUFA files * Update descriptions for newer version of LUFA * Create PR6245.md * Fix CDC(Serial) type errors * Fix missed merge conflict for AUDIO_DTYPE_CSInterface --- lib/lufa/Projects/Magstripe/Config/AppConfig.h | 58 - lib/lufa/Projects/Magstripe/Config/LUFAConfig.h | 93 - lib/lufa/Projects/Magstripe/Descriptors.c | 216 -- lib/lufa/Projects/Magstripe/Descriptors.h | 96 - .../Projects/Magstripe/Lib/CircularBitBuffer.c | 115 - .../Projects/Magstripe/Lib/CircularBitBuffer.h | 97 - lib/lufa/Projects/Magstripe/Lib/MagstripeHW.h | 102 - lib/lufa/Projects/Magstripe/Magstripe.c | 228 -- lib/lufa/Projects/Magstripe/Magstripe.h | 90 - lib/lufa/Projects/Magstripe/Magstripe.txt | 163 -- lib/lufa/Projects/Magstripe/asf.xml | 52 - lib/lufa/Projects/Magstripe/doxyfile | 2395 -------------------- lib/lufa/Projects/Magstripe/makefile | 43 - 13 files changed, 3748 deletions(-) delete mode 100644 lib/lufa/Projects/Magstripe/Config/AppConfig.h delete mode 100644 lib/lufa/Projects/Magstripe/Config/LUFAConfig.h delete mode 100644 lib/lufa/Projects/Magstripe/Descriptors.c delete mode 100644 lib/lufa/Projects/Magstripe/Descriptors.h delete mode 100644 lib/lufa/Projects/Magstripe/Lib/CircularBitBuffer.c delete mode 100644 lib/lufa/Projects/Magstripe/Lib/CircularBitBuffer.h delete mode 100644 lib/lufa/Projects/Magstripe/Lib/MagstripeHW.h delete mode 100644 lib/lufa/Projects/Magstripe/Magstripe.c delete mode 100644 lib/lufa/Projects/Magstripe/Magstripe.h delete mode 100644 lib/lufa/Projects/Magstripe/Magstripe.txt delete mode 100644 lib/lufa/Projects/Magstripe/asf.xml delete mode 100644 lib/lufa/Projects/Magstripe/doxyfile delete mode 100644 lib/lufa/Projects/Magstripe/makefile (limited to 'lib/lufa/Projects/Magstripe') diff --git a/lib/lufa/Projects/Magstripe/Config/AppConfig.h b/lib/lufa/Projects/Magstripe/Config/AppConfig.h deleted file mode 100644 index 2b417b8a90..0000000000 --- a/lib/lufa/Projects/Magstripe/Config/AppConfig.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief Application Configuration Header File - * - * This is a header file which is be used to configure some of - * the application's compile time options, as an alternative to - * specifying the compile time constants supplied through a - * makefile or build system. - * - * For information on what each token does, refer to the - * \ref Sec_Options section of the application documentation. - */ - -#ifndef _APP_CONFIG_H_ -#define _APP_CONFIG_H_ - - #define MAG_T1_CLOCK (1 << 0) - #define MAG_T1_DATA (1 << 1) - #define MAG_T2_CLOCK (1 << 2) - #define MAG_T2_DATA (1 << 3) - #define MAG_T3_CLOCK (1 << 4) - #define MAG_T3_DATA (1 << 5) - #define MAG_CARDPRESENT (1 << 6) - - #define MAG_PORT PORTC - #define MAG_PIN PINC - #define MAG_DDR DDRC - -#endif diff --git a/lib/lufa/Projects/Magstripe/Config/LUFAConfig.h b/lib/lufa/Projects/Magstripe/Config/LUFAConfig.h deleted file mode 100644 index 2b8d027a3d..0000000000 --- a/lib/lufa/Projects/Magstripe/Config/LUFAConfig.h +++ /dev/null @@ -1,93 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief LUFA Library Configuration Header File - * - * This header file is used to configure LUFA's compile time options, - * as an alternative to the compile time constants supplied through - * a makefile. - * - * For information on what each token does, refer to the LUFA - * manual section "Summary of Compile Tokens". - */ - -#ifndef _LUFA_CONFIG_H_ -#define _LUFA_CONFIG_H_ - - #if (ARCH == ARCH_AVR8) - - /* Non-USB Related Configuration Tokens: */ -// #define DISABLE_TERMINAL_CODES - - /* USB Class Driver Related Tokens: */ -// #define HID_HOST_BOOT_PROTOCOL_ONLY -// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} -// #define HID_USAGE_STACK_DEPTH {Insert Value Here} -// #define HID_MAX_COLLECTIONS {Insert Value Here} -// #define HID_MAX_REPORTITEMS {Insert Value Here} -// #define HID_MAX_REPORT_IDS {Insert Value Here} -// #define NO_CLASS_DRIVER_AUTOFLUSH - - /* General USB Driver Related Tokens: */ - #define ORDERED_EP_CONFIG - #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) - #define USB_DEVICE_ONLY -// #define USB_HOST_ONLY -// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} -// #define NO_LIMITED_CONTROLLER_CONNECT -// #define NO_SOF_EVENTS - - /* USB Device Mode Driver Related Tokens: */ -// #define USE_RAM_DESCRIPTORS - #define USE_FLASH_DESCRIPTORS -// #define USE_EEPROM_DESCRIPTORS -// #define NO_INTERNAL_SERIAL - #define FIXED_CONTROL_ENDPOINT_SIZE 8 - #define DEVICE_STATE_AS_GPIOR 0 - #define FIXED_NUM_CONFIGURATIONS 1 -// #define CONTROL_ONLY_DEVICE -// #define INTERRUPT_CONTROL_ENDPOINT -// #define NO_DEVICE_REMOTE_WAKEUP -// #define NO_DEVICE_SELF_POWER - - /* USB Host Mode Driver Related Tokens: */ -// #define HOST_STATE_AS_GPIOR {Insert Value Here} -// #define USB_HOST_TIMEOUT_MS {Insert Value Here} -// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} -// #define NO_AUTO_VBUS_MANAGEMENT -// #define INVERTED_VBUS_ENABLE_LINE - - #else - - #error Unsupported architecture for this LUFA configuration file. - - #endif -#endif diff --git a/lib/lufa/Projects/Magstripe/Descriptors.c b/lib/lufa/Projects/Magstripe/Descriptors.c deleted file mode 100644 index 8032bccc84..0000000000 --- a/lib/lufa/Projects/Magstripe/Descriptors.c +++ /dev/null @@ -1,216 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com) - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special - * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. - */ - -#include "Descriptors.h" - -/** HID report descriptor. This is a HID class specific descriptor, which defines the structure of the - * reports sent and received by the HID device to and from the USB host. It indicates what data is sent, - * where in the report each element is located and exactly how the data should be interpreted and used. - * - * See the HID class specification for more information on HID report descriptors. - */ -const USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] = -{ - /* Use the HID class driver's standard Keyboard report. - * Max simultaneous keys: 6 - */ - HID_DESCRIPTOR_KEYBOARD(6) -}; - -/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall - * device characteristics, including the supported USB version, control endpoint size and the - * number of device configurations. The descriptor is read out by the USB host when the enumeration - * process begins. - */ -const USB_Descriptor_Device_t PROGMEM DeviceDescriptor = -{ - .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - - .USBSpecification = VERSION_BCD(1,1,0), - .Class = USB_CSCP_NoDeviceClass, - .SubClass = USB_CSCP_NoDeviceSubclass, - .Protocol = USB_CSCP_NoDeviceProtocol, - - .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - - .VendorID = 0x03EB, - .ProductID = 0x2042, - .ReleaseNumber = VERSION_BCD(0,0,1), - - .ManufacturerStrIndex = STRING_ID_Manufacturer, - .ProductStrIndex = STRING_ID_Product, - .SerialNumStrIndex = USE_INTERNAL_SERIAL, - - .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS -}; - -/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage - * of the device in one of its supported configurations, including information about any device interfaces - * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting - * a configuration so that the host may correctly communicate with the USB device. - */ -const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = -{ - .Config = - { - .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, - - .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), - .TotalInterfaces = 1, - - .ConfigurationNumber = 1, - .ConfigurationStrIndex = NO_DESCRIPTOR, - - .ConfigAttributes = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED), - - .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) - }, - - .HID_Interface = - { - .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, - - .InterfaceNumber = INTERFACE_ID_Keyboard, - .AlternateSetting = 0x00, - - .TotalEndpoints = 1, - - .Class = HID_CSCP_HIDClass, - .SubClass = HID_CSCP_BootSubclass, - .Protocol = HID_CSCP_KeyboardBootProtocol, - - .InterfaceStrIndex = NO_DESCRIPTOR - }, - - .HID_KeyboardHID = - { - .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, - - .HIDSpec = VERSION_BCD(1,1,1), - .CountryCode = 0x00, - .TotalReportDescriptors = 1, - .HIDReportType = HID_DTYPE_Report, - .HIDReportLength = sizeof(KeyboardReport) - }, - - .HID_ReportINEndpoint = - { - .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - - .EndpointAddress = KEYBOARD_EPADDR, - .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), - .EndpointSize = KEYBOARD_EPSIZE, - .PollingIntervalMS = 0x05 - }, -}; - -/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests - * the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate - * via the language ID table available at USB.org what languages the device supports for its string descriptors. */ -const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG); - -/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable - * form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device - * Descriptor. - */ -const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera and Denver Gingerich"); - -/** Product descriptor string. This is a Unicode string containing the product's details in human readable form, - * and is read out upon request by the host when the appropriate string ID is requested, listed in the Device - * Descriptor. - */ -const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"Magnetic Card Reader"); - -/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors" - * documentation) by the application code so that the address and size of a requested descriptor can be given - * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function - * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the - * USB host. - */ -uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, - const uint16_t wIndex, - const void** const DescriptorAddress) -{ - const uint8_t DescriptorType = (wValue >> 8); - const uint8_t DescriptorNumber = (wValue & 0xFF); - - const void* Address = NULL; - uint16_t Size = NO_DESCRIPTOR; - - switch (DescriptorType) - { - case DTYPE_Device: - Address = &DeviceDescriptor; - Size = sizeof(USB_Descriptor_Device_t); - break; - case DTYPE_Configuration: - Address = &ConfigurationDescriptor; - Size = sizeof(USB_Descriptor_Configuration_t); - break; - case DTYPE_String: - switch (DescriptorNumber) - { - case STRING_ID_Language: - Address = &LanguageString; - Size = pgm_read_byte(&LanguageString.Header.Size); - break; - case STRING_ID_Manufacturer: - Address = &ManufacturerString; - Size = pgm_read_byte(&ManufacturerString.Header.Size); - break; - case STRING_ID_Product: - Address = &ProductString; - Size = pgm_read_byte(&ProductString.Header.Size); - break; - } - - break; - case HID_DTYPE_HID: - Address = &ConfigurationDescriptor.HID_KeyboardHID; - Size = sizeof(USB_HID_Descriptor_HID_t); - break; - case HID_DTYPE_Report: - Address = &KeyboardReport; - Size = sizeof(KeyboardReport); - break; - } - - *DescriptorAddress = Address; - return Size; -} - diff --git a/lib/lufa/Projects/Magstripe/Descriptors.h b/lib/lufa/Projects/Magstripe/Descriptors.h deleted file mode 100644 index 149fe75314..0000000000 --- a/lib/lufa/Projects/Magstripe/Descriptors.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com) - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for Descriptors.c. - */ - -#ifndef _DESCRIPTORS_H_ -#define _DESCRIPTORS_H_ - - /* Includes: */ - #include - - #include - - #include "Config/AppConfig.h" - - /* Type Defines: */ - /** Type define for the device configuration descriptor structure. This must be defined in the - * application code, as the configuration descriptor contains several sub-descriptors which - * vary between devices, and which describe the device's usage to the host. - */ - typedef struct - { - USB_Descriptor_Configuration_Header_t Config; /**< Configuration descriptor header structure */ - - // Keyboard HID Interface - USB_Descriptor_Interface_t HID_Interface; /**< Keyboard interface descriptor */ - USB_HID_Descriptor_HID_t HID_KeyboardHID; /**< Keyboard HID descriptor */ - USB_Descriptor_Endpoint_t HID_ReportINEndpoint; /**< Keyboard key report endpoint descriptor */ - } USB_Descriptor_Configuration_t; - - /** Enum for the device interface descriptor IDs within the device. Each interface descriptor - * should have a unique ID index associated with it, which can be used to refer to the - * interface from other descriptors. - */ - enum InterfaceDescriptors_t - { - INTERFACE_ID_Keyboard = 0, /**< Keyboard interface descriptor ID */ - }; - - /** Enum for the device string descriptor IDs within the device. Each string descriptor should - * have a unique ID index associated with it, which can be used to refer to the string from - * other descriptors. - */ - enum StringDescriptors_t - { - STRING_ID_Language = 0, /**< Supported Languages string descriptor ID (must be zero) */ - STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */ - STRING_ID_Product = 2, /**< Product string ID */ - }; - - /* Macros: */ - /** Endpoint address of the keyboard key press reporting endpoint. */ - #define KEYBOARD_EPADDR (ENDPOINT_DIR_IN | 1) - - /** Size of the keyboard report endpoints, in bytes. */ - #define KEYBOARD_EPSIZE 8 - - /* Function Prototypes: */ - uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, - const uint16_t wIndex, - const void** const DescriptorAddress) - ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); - -#endif - diff --git a/lib/lufa/Projects/Magstripe/Lib/CircularBitBuffer.c b/lib/lufa/Projects/Magstripe/Lib/CircularBitBuffer.c deleted file mode 100644 index 802d040c5b..0000000000 --- a/lib/lufa/Projects/Magstripe/Lib/CircularBitBuffer.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com) - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** Circular bit buffer library. This will allow for individual bits - * to be stored in packed form inside circular buffers, to reduce - * overall RAM usage. - */ - -#include "CircularBitBuffer.h" - -/** Function to initialize or reset a bit buffer, ready for data to be stored into it. */ -void BitBuffer_Init(BitBuffer_t* const Buffer) -{ - /* Reset the number of stored bits in the buffer */ - Buffer->Elements = 0; - - /* Reset the data in and out pointer structures in the buffer to the first buffer bit */ - Buffer->In.CurrentByte = Buffer->Data; - Buffer->In.ByteMask = (1 << 0); - Buffer->Out.CurrentByte = Buffer->Data; - Buffer->Out.ByteMask = (1 << 0); -} - -/** Function to store the given bit into the given bit buffer. */ -void BitBuffer_StoreNextBit(BitBuffer_t* const Buffer, - const bool Bit) -{ - /* If the bit to store is true, set the next bit in the buffer */ - if (Bit) - *Buffer->In.CurrentByte |= Buffer->In.ByteMask; - - /* Increment the number of stored bits in the buffer counter */ - Buffer->Elements++; - - /* Check if the current buffer byte is full of stored bits */ - if (Buffer->In.ByteMask == (1 << 7)) - { - /* Check if the end of the buffer has been reached, if so reset to start of buffer, otherwise advance to next bit */ - if (Buffer->In.CurrentByte != &Buffer->Data[sizeof(Buffer->Data) - 1]) - Buffer->In.CurrentByte++; - else - Buffer->In.CurrentByte = Buffer->Data; - - /* Reset the storage bit mask in the current buffer byte to the first bit */ - Buffer->In.ByteMask = (1 << 0); - } - else - { - /* Shift the current storage bit mask to the next bit in the current byte */ - Buffer->In.ByteMask <<= 1; - } -} - -/** Function to retrieve the next bit stored in the given bit buffer. */ -bool BitBuffer_GetNextBit(BitBuffer_t* const Buffer) -{ - /* Retrieve the value of the next bit stored in the buffer */ - bool Bit = ((*Buffer->Out.CurrentByte & Buffer->Out.ByteMask) != 0); - - /* Clear the buffer bit */ - *Buffer->Out.CurrentByte &= ~Buffer->Out.ByteMask; - - /* Decrement the number of stored bits in the buffer counter */ - Buffer->Elements--; - - /* Check if the current buffer byte is empty of stored bits */ - if (Buffer->Out.ByteMask == (1 << 7)) - { - /* Check if the end of the buffer has been reached, if so reset to start of buffer, otherwise advance to next bit */ - if (Buffer->Out.CurrentByte != &Buffer->Data[sizeof(Buffer->Data) - 1]) - Buffer->Out.CurrentByte++; - else - Buffer->Out.CurrentByte = Buffer->Data; - - /* Reset the retrieval bit mask in the current buffer byte to the first bit */ - Buffer->Out.ByteMask = (1 << 0); - } - else - { - /* Shift the current retrieval bit mask to the next bit in the current byte */ - Buffer->Out.ByteMask <<= 1; - } - - /* Return the retrieved bit from the buffer */ - return Bit; -} - diff --git a/lib/lufa/Projects/Magstripe/Lib/CircularBitBuffer.h b/lib/lufa/Projects/Magstripe/Lib/CircularBitBuffer.h deleted file mode 100644 index 0adbe0c89e..0000000000 --- a/lib/lufa/Projects/Magstripe/Lib/CircularBitBuffer.h +++ /dev/null @@ -1,97 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com) - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for CircularBitBuffer.c. - */ - -#ifndef _CIRCULARBITBUFFER_H_ -#define _CIRCULARBITBUFFER_H_ - - /* Includes: */ - #include - #include - - #include - - /* Macros: */ - #if (defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB647__) || \ - defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__)) || defined(__DOXYGEN__) - /** Maximum number of bits which can be stored into a bit buffer. The memory usage is one eighth of this value per buffer. */ - #define MAX_BITS 8192 - #else - #define MAX_BITS 1024 - #endif - - /* Type Defines: */ - /** Type define for a pointer to a bit in a bit buffer. */ - typedef struct - { - uint8_t* CurrentByte; /**< Pointer to the current byte in the buffer */ - uint8_t ByteMask; /**< Mask of the current bit in the buffer */ - } BitBufferPointer_t; - - /** Type define for a circular packet bit buffer. */ - typedef struct - { - uint8_t Data[MAX_BITS / 8]; /**< Buffer to hold the stored bits in packed form */ - uint16_t Elements; /**< Number of stored bits in the bit buffer */ - - BitBufferPointer_t In; /**< Bit pointer to the next storage location in the buffer */ - BitBufferPointer_t Out; /**< Bit pointer to the next retrieval location in the buffer */ - } BitBuffer_t; - - /* Function Prototypes: */ - /** Initializes or resets a given bit buffer, ready to store new bits. - * - * \param[in,out] Buffer Bit buffer to initialize - */ - void BitBuffer_Init(BitBuffer_t* const Buffer) ATTR_NON_NULL_PTR_ARG(1); - - /** Stores a bit into the next location inside a given bit buffer. - * - * \param[in,out] Buffer Bit buffer to store a bit into - * \param[in] Bit Bit to store into the buffer - */ - void BitBuffer_StoreNextBit(BitBuffer_t* const Buffer, - const bool Bit) ATTR_NON_NULL_PTR_ARG(1); - - /** Retrieves a bit from the next location inside a given bit buffer. - * - * \param[in,out] Buffer Bit buffer to retrieve a bit from - * - * \return Next bit from the buffer - */ - bool BitBuffer_GetNextBit(BitBuffer_t* const Buffer) ATTR_NON_NULL_PTR_ARG(1); - -#endif - diff --git a/lib/lufa/Projects/Magstripe/Lib/MagstripeHW.h b/lib/lufa/Projects/Magstripe/Lib/MagstripeHW.h deleted file mode 100644 index 6d9cc8cbc4..0000000000 --- a/lib/lufa/Projects/Magstripe/Lib/MagstripeHW.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com) - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/* - NOTE: The user of this include file MUST define the following macros - prior to including the file: - - MAG_T1_CLOCK_PIN Pin connected to Track 1 clock wire (i.e.. PORTC1) - MAG_T1_DATA_PIN Pin connected to Track 1 data wire (i.e.. PORTC2) - MAG_T2_CLOCK_PIN Pin connected to Track 2 clock wire (i.e.. PORTC3) - MAG_T2_DATA_PIN Pin connected to Track 2 data wire (i.e.. PORTC0) - MAG_T3_CLOCK_PIN Pin connected to Track 3 clock wire (i.e.. PORTC5) - MAG_T3_DATA_PIN Pin connected to Track 3 data wire (i.e.. PORTC6) - MAG_CLS_PIN Pin connected to card loaded wire (i.e.. PORTC4) - MAG_PIN PIN macro for the reader's port (i.e.. PINC) - MAG_DDR DDR macro for the reader's port (i.e.. DDRC) - MAG_PORT PORT macro for the reader's port (i.e.. PORTC) - - The example macros listed above assume that the Track 2 data wire is - connected to pin 0 on port C, the Track 2 clock wire is connected to - pin 3 on port C (similarly for Tracks 1 and 3), and the card loaded - wire is connected to pin 4 on port C. - - If the mag-stripe reader you are using only reads one or two tracks, - then set the clock and data pins for the tracks it doesn't read to a - pin that is unused. For example, on the AT90USBKey, any of the pins on - port C that do not have wires attached will be unused since they are - not connected to any onboard devices (such as the joystick or - temperature sensor). - - Connecting wires to pins on different ports (i.e.. a data wire to pin 0 - on port C and a clock wire to pin 0 on port D) is currently - unsupported. All pins specified above must be on the same port. -*/ - -/** \file - * - * Driver header for a TTL Magnetic Card reader device (such as the Omron V3B-4K). - */ - -#ifndef _MAGSTRIPEHW_H_ -#define _MAGSTRIPEHW_H_ - - /* Includes: */ - #include - - #include - #include "Config/AppConfig.h" - - /* Private Interface - For use in library only: */ - /* Macros: */ - /** Mask of the track data, clock and card detection pins. */ - #define MAG_MASK (MAG_T1_DATA | MAG_T1_CLOCK | \ - MAG_T2_DATA | MAG_T2_CLOCK | \ - MAG_T3_DATA | MAG_T3_CLOCK | \ - MAG_CARDPRESENT) - - /* Public Interface - May be used in end-application: */ - /* Inline Functions: */ - /** Initializes the magnetic stripe card reader ports and pins so that the card reader - * device can be controlled and read by the card reader driver. This must be called before - * trying to read any of the card reader's status lines. - */ - static inline void Magstripe_Init(void) - { - MAG_DDR &= ~MAG_MASK; - MAG_PORT |= MAG_MASK; - }; - - /** Returns the status of all the magnetic card reader's outputs. - * - * \return A mask indicating which card lines are high or low - */ - static inline uint8_t Magstripe_GetStatus(void) ATTR_WARN_UNUSED_RESULT; - static inline uint8_t Magstripe_GetStatus(void) - { - /* Mag-stripe IOs are active low and must be inverted when read */ - return ((uint8_t)~MAG_PIN & MAG_MASK); - } - -#endif - diff --git a/lib/lufa/Projects/Magstripe/Magstripe.c b/lib/lufa/Projects/Magstripe/Magstripe.c deleted file mode 100644 index 9bb6ff01a0..0000000000 --- a/lib/lufa/Projects/Magstripe/Magstripe.c +++ /dev/null @@ -1,228 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com) - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Main source file for the MagStripe reader program. This file contains the main tasks of - * the project and is responsible for the initial application hardware configuration. - */ - -#include "Magstripe.h" - -/** Bit buffers to hold the read bits for each of the three magnetic card tracks before they are transmitted - * to the host as keyboard presses. - */ -static BitBuffer_t TrackDataBuffers[TOTAL_TRACKS]; - -/** Pointer to the current track buffer being sent to the host. */ -static BitBuffer_t* CurrentTrackBuffer = &TrackDataBuffers[TOTAL_TRACKS]; - -/** Buffer to hold the previously generated Keyboard HID report, for comparison purposes inside the HID class driver. */ -static uint8_t PrevKeyboardHIDReportBuffer[sizeof(USB_KeyboardReport_Data_t)]; - -/** LUFA HID Class driver interface configuration and state information. This structure is - * passed to all HID Class driver functions, so that multiple instances of the same class - * within a device can be differentiated from one another. - */ -USB_ClassInfo_HID_Device_t Keyboard_HID_Interface = - { - .Config = - { - .InterfaceNumber = INTERFACE_ID_Keyboard, - .ReportINEndpoint = - { - .Address = KEYBOARD_EPADDR, - .Size = KEYBOARD_EPSIZE, - .Banks = 1, - }, - .PrevReportINBuffer = PrevKeyboardHIDReportBuffer, - .PrevReportINBufferSize = sizeof(PrevKeyboardHIDReportBuffer), - }, - }; - - -/** Main program entry point. This routine contains the overall program flow, including initial - * setup of all components and the main program loop. - */ -int main(void) -{ - SetupHardware(); - - for (uint8_t Buffer = 0; Buffer < TOTAL_TRACKS; Buffer++) - BitBuffer_Init(&TrackDataBuffers[Buffer]); - - GlobalInterruptEnable(); - - for (;;) - { - if (Magstripe_GetStatus() & MAG_CARDPRESENT) - ReadMagstripeData(); - - HID_Device_USBTask(&Keyboard_HID_Interface); - USB_USBTask(); - } -} - -/** Configures the board hardware and chip peripherals for the demo's functionality. */ -void SetupHardware(void) -{ -#if (ARCH == ARCH_AVR8) - /* Disable watchdog if enabled by bootloader/fuses */ - MCUSR &= ~(1 << WDRF); - wdt_disable(); - - /* Disable clock division */ - clock_prescale_set(clock_div_1); -#endif - - /* Hardware Initialization */ - Magstripe_Init(); - USB_Init(); -} - -/** Determines if a card has been inserted, and if so reads in each track's contents into the bit buffers - * until they are read out to the host as a series of keyboard presses. - */ -void ReadMagstripeData(void) -{ - /* Arrays to hold the buffer pointers, clock and data bit masks for the separate card tracks */ - const struct - { - uint8_t ClockMask; - uint8_t DataMask; - } TrackInfo[] = {{MAG_T1_CLOCK, MAG_T1_DATA}, - {MAG_T2_CLOCK, MAG_T2_DATA}, - {MAG_T3_CLOCK, MAG_T3_DATA}}; - - uint8_t Magstripe_Prev = 0; - uint8_t Magstripe_LCL = Magstripe_GetStatus(); - - while (Magstripe_LCL & MAG_CARDPRESENT) - { - for (uint8_t Track = 0; Track < TOTAL_TRACKS; Track++) - { - bool DataPinLevel = ((Magstripe_LCL & TrackInfo[Track].DataMask) != 0); - bool ClockPinLevel = ((Magstripe_LCL & TrackInfo[Track].ClockMask) != 0); - bool ClockLevelChanged = (((Magstripe_LCL ^ Magstripe_Prev) & TrackInfo[Track].ClockMask) != 0); - - /* Sample data on rising clock edges from the card reader */ - if (ClockPinLevel && ClockLevelChanged) - BitBuffer_StoreNextBit(&TrackDataBuffers[Track], DataPinLevel); - } - - Magstripe_Prev = Magstripe_LCL; - Magstripe_LCL = Magstripe_GetStatus(); - } - - CurrentTrackBuffer = &TrackDataBuffers[0]; -} - -/** Event handler for the library USB Configuration Changed event. */ -void EVENT_USB_Device_ConfigurationChanged(void) -{ - HID_Device_ConfigureEndpoints(&Keyboard_HID_Interface); - - USB_Device_EnableSOFEvents(); -} - -/** Event handler for the library USB Control Request reception event. */ -void EVENT_USB_Device_ControlRequest(void) -{ - HID_Device_ProcessControlRequest(&Keyboard_HID_Interface); -} - -/** Event handler for the USB device Start Of Frame event. */ -void EVENT_USB_Device_StartOfFrame(void) -{ - HID_Device_MillisecondElapsed(&Keyboard_HID_Interface); -} - -/** HID class driver callback function for the creation of HID reports to the host. - * - * \param[in] HIDInterfaceInfo Pointer to the HID class interface configuration structure being referenced - * \param[in,out] ReportID Report ID requested by the host if non-zero, otherwise callback should set to the generated report ID - * \param[in] ReportType Type of the report to create, either HID_REPORT_ITEM_In or HID_REPORT_ITEM_Feature - * \param[out] ReportData Pointer to a buffer where the created report should be stored - * \param[out] ReportSize Number of bytes written in the report (or zero if no report is to be sent) - * - * \return Boolean \c true to force the sending of the report, \c false to let the library determine if it needs to be sent - */ -bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, - uint8_t* const ReportID, - const uint8_t ReportType, - void* ReportData, - uint16_t* const ReportSize) -{ - USB_KeyboardReport_Data_t* KeyboardReport = (USB_KeyboardReport_Data_t*)ReportData; - - static bool IsKeyReleaseReport; - - /* Key reports must be interleaved with key release reports, or repeated keys will be ignored */ - IsKeyReleaseReport = !IsKeyReleaseReport; - - if ((IsKeyReleaseReport) || (CurrentTrackBuffer == &TrackDataBuffers[TOTAL_TRACKS])) - { - /* No more data to send, or key release report between key presses */ - KeyboardReport->KeyCode[0] = KEY_NONE; - } - else if (!(CurrentTrackBuffer->Elements)) - { - /* End of current track, send an enter press and change to the next track's buffer */ - KeyboardReport->KeyCode[0] = KEY_ENTER; - CurrentTrackBuffer++; - } - else - { - /* Still data in the current track; convert next bit to a 1 or 0 keypress */ - KeyboardReport->KeyCode[0] = BitBuffer_GetNextBit(CurrentTrackBuffer) ? KEY_1 : KEY_0; - } - - *ReportSize = sizeof(USB_KeyboardReport_Data_t); - return false; -} - -/** HID Class driver callback function for the processing of a received HID report from the host. - * - * \param[in] HIDInterfaceInfo Pointer to the HID interface structure for the HID interface being referenced - * \param[in] ReportID Report ID of the received report from the host - * \param[in] ReportType The type of report that the host has sent, either HID_REPORT_ITEM_Out or HID_REPORT_ITEM_Feature - * \param[in] ReportData Pointer to the report buffer where the received report is stored - * \param[in] ReportSize Size in bytes of the report received from the host - */ -void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, - const uint8_t ReportID, - const uint8_t ReportType, - const void* ReportData, - const uint16_t ReportSize) -{ - // Ignore keyboard LED reports from the host, but still need to declare the callback routine -} - diff --git a/lib/lufa/Projects/Magstripe/Magstripe.h b/lib/lufa/Projects/Magstripe/Magstripe.h deleted file mode 100644 index 342cd8ffe5..0000000000 --- a/lib/lufa/Projects/Magstripe/Magstripe.h +++ /dev/null @@ -1,90 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com) - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for Magstripe.c. - */ - -#ifndef _MAGSTRIPE_H_ -#define _MAGSTRIPE_H_ - - /* Includes: */ - #include - #include - #include - #include - - #include "Descriptors.h" - #include "Lib/MagstripeHW.h" - #include "Lib/CircularBitBuffer.h" - #include "Config/AppConfig.h" - - #include - #include - - /* Macros: */ - /** Total number of tracks which can be read from the card, between 1 and 3. */ - #define TOTAL_TRACKS 3 - - /** HID keyboard keycode to indicate that no is currently pressed. */ - #define KEY_NONE 0 - - /** HID keyboard keycode to indicate that the "1" key is currently pressed. */ - #define KEY_1 30 - - /** HID keyboard keycode to indicate that the "0" key is currently pressed. */ - #define KEY_0 39 - - /** HID keyboard keycode to indicate that the enter key is currently pressed. */ - #define KEY_ENTER 40 - - /* Function Prototypes: */ - void SetupHardware(void); - void ReadMagstripeData(void); - - void EVENT_USB_Device_ConfigurationChanged(void); - void EVENT_USB_Device_ControlRequest(void); - void EVENT_USB_Device_StartOfFrame(void); - - bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, - uint8_t* const ReportID, - const uint8_t ReportType, - void* ReportData, - uint16_t* const ReportSize); - void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, - const uint8_t ReportID, - const uint8_t ReportType, - const void* ReportData, - const uint16_t ReportSize); - -#endif - diff --git a/lib/lufa/Projects/Magstripe/Magstripe.txt b/lib/lufa/Projects/Magstripe/Magstripe.txt deleted file mode 100644 index a11dfaf804..0000000000 --- a/lib/lufa/Projects/Magstripe/Magstripe.txt +++ /dev/null @@ -1,163 +0,0 @@ -/** \file - * - * This file contains special DoxyGen information for the generation of the main page and other special - * documentation pages. It is not a project source file. - */ - -/** \mainpage Denver Gingerich's USBSnoop Magnetic Card Reader Project - * - * \section Sec_Compat Project Compatibility: - * - * The following list indicates what microcontrollers are compatible with this project. - * - * \li AT90USB1287 - * \li AT90USB1286 - * - * \section Sec_Info USB Information: - * - * The following table gives a rundown of the USB utilization of this project. - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - *
USB Mode:Device
USB Class:Human Interface Device (HID)
USB Subclass:Keyboard
Relevant Standards:USBIF HID Standard, USBIF HID Usage Tables
Supported USB Speeds:Full Speed Mode
- * - * \section Sec_Description Project Description: - * - * Firmware for a USB AVR powered USB TTL magnetic stripe reader (using a card - * reader such as the Omron V3B-4K) by Denver Gingerich. This project is designed - * to be used with the open source Stripe Snoop project at http://stripesnoop.sourceforge.net/. - * - * See http://ossguy.com/ss_usb/ for the USB reader hardware project website, - * including construction and support details. - * - * To use, connect your magnetic card reader device to the USB AVR as follows (pin and port mapping may be adjusted - * from the project makefile): - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - *
Signal:AVR Port:
Track 1 DataPORTC, Pin 1
Track 1 ClockPORTC, Pin 2
Track 2 DataPORTC, Pin 3
Track 2 ClockPORTC, Pin 0
Track 3 DataPORTC, Pin 5
Track 3 ClockPORTC, Pin 6
Card DetectPORTC, Pin 4
- * - * This project is based on the LUFA Keyboard project demonstration application, written by Denver Gingerich. - * - * This application uses a keyboard HID driver to communicate the data collected a TTL magnetic stripe reader - * to the connected computer. The raw bitstream obtained from the magnetic stripe reader is "typed" through - * the keyboard driver as 0's and 1's. After every card swipe, the project will send a return key. - * - * \section Sec_Options Project Options - * - * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value. - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - *
Define Name:Location:Description:
MAX_BITSCircularBitBuffer.hGives the maximum number of bits per track which can be buffered by the device for later transmission to a host.
MAG_T1_CLOCKAppConfig.hMask for the magnetic card reader's CLOCK line for the reader's track 1 output.
MAG_T1_DATAAppConfig.hMask for the magnetic card reader's DATA line for the reader's track 1 output.
MAG_T2_CLOCKAppConfig.hMask for the magnetic card reader's CLOCK line for the reader's track 2 output.
MAG_T2_DATAAppConfig.hMask for the magnetic card reader's DATA line for the reader's track 2 output.
MAG_T3_CLOCKAppConfig.hMask for the magnetic card reader's CLOCK line for the reader's track 3 output.
MAG_T3_DATAAppConfig.hMask for the magnetic card reader's DATA line for the reader's track 3 output.
MAG_CARDPRESENTAppConfig.hMask for the magnetic card reader's card detection output.
MAG_PINAppConfig.hPIN register that the magnetic card reader device is attached to.
MAG_PORTAppConfig.hPORT register that the magnetic card reader device is attached to.
MAG_DDRAppConfig.hDDR register that the magnetic card reader device is attached to.
- */ - diff --git a/lib/lufa/Projects/Magstripe/asf.xml b/lib/lufa/Projects/Magstripe/asf.xml deleted file mode 100644 index 068eaa6fce..0000000000 --- a/lib/lufa/Projects/Magstripe/asf.xml +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - Magnetic strip card reader project. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/lib/lufa/Projects/Magstripe/doxyfile b/lib/lufa/Projects/Magstripe/doxyfile deleted file mode 100644 index 23554c194b..0000000000 --- a/lib/lufa/Projects/Magstripe/doxyfile +++ /dev/null @@ -1,2395 +0,0 @@ -# Doxyfile 1.8.9 - -# This file describes the settings to be used by the documentation system -# doxygen (www.doxygen.org) for a project. -# -# All text after a double hash (##) is considered a comment and is placed in -# front of the TAG it is preceding. -# -# All text after a single hash (#) is considered a comment and will be ignored. -# The format is: -# TAG = value [value, ...] -# For lists, items can also be appended using: -# TAG += value [value, ...] -# Values that contain spaces should be placed between quotes (\" \"). - -#--------------------------------------------------------------------------- -# Project related configuration options -#--------------------------------------------------------------------------- - -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. -# The default value is: UTF-8. - -DOXYFILE_ENCODING = UTF-8 - -# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by -# double-quotes, unless you are using Doxywizard) that should identify the -# project for which the documentation is generated. This name is used in the -# title of most generated pages and in a few other places. -# The default value is: My Project. - -PROJECT_NAME = "Denver Gingerich's Stripe Snoop Project" - -# The PROJECT_NUMBER tag can be used to enter a project or revision number. This -# could be handy for archiving the generated documentation or if some version -# control system is used. - -PROJECT_NUMBER = - -# Using the PROJECT_BRIEF tag one can provide an optional one line description -# for a project that appears at the top of each page and should give viewer a -# quick idea about the purpose of the project. Keep the description short. - -PROJECT_BRIEF = - -# With the PROJECT_LOGO tag one can specify a logo or an icon that is included -# in the documentation. The maximum height of the logo should not exceed 55 -# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy -# the logo to the output directory. - -PROJECT_LOGO = - -# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path -# into which the generated documentation will be written. If a relative path is -# entered, it will be relative to the location where doxygen was started. If -# left blank the current directory will be used. - -OUTPUT_DIRECTORY = ./Documentation/ - -# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- -# directories (in 2 levels) under the output directory of each output format and -# will distribute the generated files over these directories. Enabling this -# option can be useful when feeding doxygen a huge amount of source files, where -# putting all generated files in the same directory would otherwise causes -# performance problems for the file system. -# The default value is: NO. - -CREATE_SUBDIRS = NO - -# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII -# characters to appear in the names of generated files. If set to NO, non-ASCII -# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode -# U+3044. -# The default value is: NO. - -ALLOW_UNICODE_NAMES = NO - -# The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, -# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), -# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, -# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), -# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, -# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, -# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, -# Ukrainian and Vietnamese. -# The default value is: English. - -OUTPUT_LANGUAGE = English - -# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member -# descriptions after the members that are listed in the file and class -# documentation (similar to Javadoc). Set to NO to disable this. -# The default value is: YES. - -BRIEF_MEMBER_DESC = YES - -# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief -# description of a member or function before the detailed description -# -# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the -# brief descriptions will be completely suppressed. -# The default value is: YES. - -REPEAT_BRIEF = YES - -# This tag implements a quasi-intelligent brief description abbreviator that is -# used to form the text in various listings. Each string in this list, if found -# as the leading text of the brief description, will be stripped from the text -# and the result, after processing the whole list, is used as the annotated -# text. Otherwise, the brief description is used as-is. If left blank, the -# following values are used ($name is automatically replaced with the name of -# the entity):The $name class, The $name widget, The $name file, is, provides, -# specifies, contains, represents, a, an and the. - -ABBREVIATE_BRIEF = "The $name class" \ - "The $name widget" \ - "The $name file" \ - is \ - provides \ - specifies \ - contains \ - represents \ - a \ - an \ - the - -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# doxygen will generate a detailed section even if there is only a brief -# description. -# The default value is: NO. - -ALWAYS_DETAILED_SEC = NO - -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all -# inherited members of a class in the documentation of that class as if those -# members were ordinary class members. Constructors, destructors and assignment -# operators of the base classes will not be shown. -# The default value is: NO. - -INLINE_INHERITED_MEMB = NO - -# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path -# before files name in the file list and in the header files. If set to NO the -# shortest path that makes the file name unique will be used -# The default value is: YES. - -FULL_PATH_NAMES = YES - -# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. -# Stripping is only done if one of the specified strings matches the left-hand -# part of the path. The tag can be used to show relative paths in the file list. -# If left blank the directory from which doxygen is run is used as the path to -# strip. -# -# Note that you can specify absolute paths here, but also relative paths, which -# will be relative from the directory where doxygen is started. -# This tag requires that the tag FULL_PATH_NAMES is set to YES. - -STRIP_FROM_PATH = - -# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the -# path mentioned in the documentation of a class, which tells the reader which -# header file to include in order to use a class. If left blank only the name of -# the header file containing the class definition is used. Otherwise one should -# specify the list of include paths that are normally passed to the compiler -# using the -I flag. - -STRIP_FROM_INC_PATH = - -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but -# less readable) file names. This can be useful is your file systems doesn't -# support long names like on DOS, Mac, or CD-ROM. -# The default value is: NO. - -SHORT_NAMES = YES - -# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the -# first line (until the first dot) of a Javadoc-style comment as the brief -# description. If set to NO, the Javadoc-style will behave just like regular Qt- -# style comments (thus requiring an explicit @brief command for a brief -# description.) -# The default value is: NO. - -JAVADOC_AUTOBRIEF = NO - -# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first -# line (until the first dot) of a Qt-style comment as the brief description. If -# set to NO, the Qt-style will behave just like regular Qt-style comments (thus -# requiring an explicit \brief command for a brief description.) -# The default value is: NO. - -QT_AUTOBRIEF = NO - -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a -# multi-line C++ special comment block (i.e. a block of //! or /// comments) as -# a brief description. This used to be the default behavior. The new default is -# to treat a multi-line C++ comment block as a detailed description. Set this -# tag to YES if you prefer the old behavior instead. -# -# Note that setting this tag to YES also means that rational rose comments are -# not recognized any more. -# The default value is: NO. - -MULTILINE_CPP_IS_BRIEF = NO - -# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the -# documentation from any documented member that it re-implements. -# The default value is: YES. - -INHERIT_DOCS = YES - -# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new -# page for each member. If set to NO, the documentation of a member will be part -# of the file/class/namespace that contains it. -# The default value is: NO. - -SEPARATE_MEMBER_PAGES = NO - -# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen -# uses this value to replace tabs by spaces in code fragments. -# Minimum value: 1, maximum value: 16, default value: 4. - -TAB_SIZE = 4 - -# This tag can be used to specify a number of aliases that act as commands in -# the documentation. An alias has the form: -# name=value -# For example adding -# "sideeffect=@par Side Effects:\n" -# will allow you to put the command \sideeffect (or @sideeffect) in the -# documentation, which will result in a user-defined paragraph with heading -# "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. - -ALIASES = - -# This tag can be used to specify a number of word-keyword mappings (TCL only). -# A mapping has the form "name=value". For example adding "class=itcl::class" -# will allow you to use the command class in the itcl::class meaning. - -TCL_SUBST = - -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources -# only. Doxygen will then generate output that is more tailored for C. For -# instance, some of the names that are used will be different. The list of all -# members will be omitted, etc. -# The default value is: NO. - -OPTIMIZE_OUTPUT_FOR_C = YES - -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or -# Python sources only. Doxygen will then generate output that is more tailored -# for that language. For instance, namespaces will be presented as p