From cf4575b94a3c65e6535a159fc71fc885aebc2620 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Fri, 2 Aug 2019 14:02:40 -0700 Subject: Fix the LUFA lib to use a submodule instead of just files (#6245) * Remove LUFA files * Update descriptions for newer version of LUFA * Create PR6245.md * Fix CDC(Serial) type errors * Fix missed merge conflict for AUDIO_DTYPE_CSInterface --- .../Host/LowLevel/KeyboardHost/Config/LUFAConfig.h | 93 - .../Host/LowLevel/KeyboardHost/ConfigDescriptor.c | 155 -- .../Host/LowLevel/KeyboardHost/ConfigDescriptor.h | 66 - .../Host/LowLevel/KeyboardHost/KeyboardHost.c | 264 --- .../Host/LowLevel/KeyboardHost/KeyboardHost.h | 80 - .../Host/LowLevel/KeyboardHost/KeyboardHost.txt | 73 - lib/lufa/Demos/Host/LowLevel/KeyboardHost/asf.xml | 50 - lib/lufa/Demos/Host/LowLevel/KeyboardHost/doxyfile | 2395 -------------------- lib/lufa/Demos/Host/LowLevel/KeyboardHost/makefile | 43 - 9 files changed, 3219 deletions(-) delete mode 100644 lib/lufa/Demos/Host/LowLevel/KeyboardHost/Config/LUFAConfig.h delete mode 100644 lib/lufa/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.c delete mode 100644 lib/lufa/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.h delete mode 100644 lib/lufa/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.c delete mode 100644 lib/lufa/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.h delete mode 100644 lib/lufa/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.txt delete mode 100644 lib/lufa/Demos/Host/LowLevel/KeyboardHost/asf.xml delete mode 100644 lib/lufa/Demos/Host/LowLevel/KeyboardHost/doxyfile delete mode 100644 lib/lufa/Demos/Host/LowLevel/KeyboardHost/makefile (limited to 'lib/lufa/Demos/Host/LowLevel/KeyboardHost') diff --git a/lib/lufa/Demos/Host/LowLevel/KeyboardHost/Config/LUFAConfig.h b/lib/lufa/Demos/Host/LowLevel/KeyboardHost/Config/LUFAConfig.h deleted file mode 100644 index 197122fce1..0000000000 --- a/lib/lufa/Demos/Host/LowLevel/KeyboardHost/Config/LUFAConfig.h +++ /dev/null @@ -1,93 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief LUFA Library Configuration Header File - * - * This header file is used to configure LUFA's compile time options, - * as an alternative to the compile time constants supplied through - * a makefile. - * - * For information on what each token does, refer to the LUFA - * manual section "Summary of Compile Tokens". - */ - -#ifndef _LUFA_CONFIG_H_ -#define _LUFA_CONFIG_H_ - - #if (ARCH == ARCH_AVR8) - - /* Non-USB Related Configuration Tokens: */ -// #define DISABLE_TERMINAL_CODES - - /* USB Class Driver Related Tokens: */ -// #define HID_HOST_BOOT_PROTOCOL_ONLY -// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} -// #define HID_USAGE_STACK_DEPTH {Insert Value Here} -// #define HID_MAX_COLLECTIONS {Insert Value Here} -// #define HID_MAX_REPORTITEMS {Insert Value Here} -// #define HID_MAX_REPORT_IDS {Insert Value Here} -// #define NO_CLASS_DRIVER_AUTOFLUSH - - /* General USB Driver Related Tokens: */ -// #define ORDERED_EP_CONFIG - #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) -// #define USB_DEVICE_ONLY - #define USB_HOST_ONLY -// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} -// #define NO_LIMITED_CONTROLLER_CONNECT -// #define NO_SOF_EVENTS - - /* USB Device Mode Driver Related Tokens: */ -// #define USE_RAM_DESCRIPTORS -// #define USE_FLASH_DESCRIPTORS -// #define USE_EEPROM_DESCRIPTORS -// #define NO_INTERNAL_SERIAL -// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} -// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} -// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} -// #define CONTROL_ONLY_DEVICE -// #define INTERRUPT_CONTROL_ENDPOINT -// #define NO_DEVICE_REMOTE_WAKEUP -// #define NO_DEVICE_SELF_POWER - - /* USB Host Mode Driver Related Tokens: */ -// #define HOST_STATE_AS_GPIOR {Insert Value Here} -// #define USB_HOST_TIMEOUT_MS {Insert Value Here} -// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} -// #define NO_AUTO_VBUS_MANAGEMENT -// #define INVERTED_VBUS_ENABLE_LINE - - #else - - #error Unsupported architecture for this LUFA configuration file. - - #endif -#endif diff --git a/lib/lufa/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.c b/lib/lufa/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.c deleted file mode 100644 index 1c152b7402..0000000000 --- a/lib/lufa/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations - * needed to communication with an attached USB device. Descriptors are special computer-readable structures - * which the host requests upon device enumeration, to determine the device's capabilities and functions. - */ - -#include "ConfigDescriptor.h" - -/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This - * routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate - * with compatible devices. - * - * This routine searches for a HID interface descriptor containing at least one Interrupt type IN endpoint. - * - * \return An error code from the \ref KeyboardHost_GetConfigDescriptorDataCodes_t enum. - */ -uint8_t ProcessConfigurationDescriptor(void) -{ - uint8_t ConfigDescriptorData[512]; - void* CurrConfigLocation = ConfigDescriptorData; - uint16_t CurrConfigBytesRem; - - USB_Descriptor_Interface_t* HIDInterface = NULL; - USB_Descriptor_Endpoint_t* DataINEndpoint = NULL; - - /* Retrieve the entire configuration descriptor into the allocated buffer */ - switch (USB_Host_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData))) - { - case HOST_GETCONFIG_Successful: - break; - case HOST_GETCONFIG_InvalidData: - return InvalidConfigDataReturned; - case HOST_GETCONFIG_BuffOverflow: - return DescriptorTooLarge; - default: - return ControlError; - } - - while (!(DataINEndpoint)) - { - /* See if we've found a likely compatible interface, and if there is an endpoint within that interface */ - if (!(HIDInterface) || - USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation, - DComp_NextKeyboardInterfaceDataEndpoint) != DESCRIPTOR_SEARCH_COMP_Found) - { - /* Get the next HID interface from the configuration descriptor */ - if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation, - DComp_NextKeyboardInterface) != DESCRIPTOR_SEARCH_COMP_Found) - { - /* Descriptor not found, error out */ - return NoCompatibleInterfaceFound; - } - - /* Save the interface in case we need to refer back to it later */ - HIDInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t); - - /* Skip the remainder of the loop as we have not found an endpoint yet */ - continue; - } - - /* Retrieve the endpoint address from the endpoint descriptor */ - USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t); - - /* If the endpoint is a IN type endpoint */ - if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_IN) - DataINEndpoint = EndpointData; - } - - /* Configure the HID data IN pipe */ - Pipe_ConfigurePipe(KEYBOARD_DATA_IN_PIPE, EP_TYPE_INTERRUPT, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); - Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS); - - /* Valid data found, return success */ - return SuccessfulConfigRead; -} - -/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's - * configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration - * descriptor processing if an incompatible descriptor configuration is found. - * - * This comparator searches for the next Interface descriptor of the correct Keyboard HID Class and Protocol values. - * - * \return A value from the DSEARCH_Return_ErrorCodes_t enum - */ -uint8_t DComp_NextKeyboardInterface(void* CurrentDescriptor) -{ - USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t); - - if (Header->Type == DTYPE_Interface) - { - USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t); - - /* Check the HID descriptor class and protocol, break out if correct class/protocol interface found */ - if ((Interface->Class == HID_CSCP_HIDClass) && - (Interface->Protocol == HID_CSCP_KeyboardBootProtocol)) - { - return DESCRIPTOR_SEARCH_Found; - } - } - - return DESCRIPTOR_SEARCH_NotFound; -} - -/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's - * configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration - * descriptor processing if an incompatible descriptor configuration is found. - * - * This comparator searches for the next Endpoint descriptor inside the current interface descriptor, aborting the - * search if another interface descriptor is found before the required endpoint. - * - * \return A value from the DSEARCH_Return_ErrorCodes_t enum - */ -uint8_t DComp_NextKeyboardInterfaceDataEndpoint(void* CurrentDescriptor) -{ - USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t); - - if (Header->Type == DTYPE_Endpoint) - return DESCRIPTOR_SEARCH_Found; - else if (Header->Type == DTYPE_Interface) - return DESCRIPTOR_SEARCH_Fail; - else - return DESCRIPTOR_SEARCH_NotFound; -} - diff --git a/lib/lufa/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.h b/lib/lufa/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.h deleted file mode 100644 index e6da558bfd..0000000000 --- a/lib/lufa/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for ConfigDescriptor.c. - */ - -#ifndef _CONFIGDESCRIPTOR_H_ -#define _CONFIGDESCRIPTOR_H_ - - /* Includes: */ - #include - - #include "KeyboardHost.h" - - /* Macros: */ - /** Pipe address for the keyboard data IN pipe. */ - #define KEYBOARD_DATA_IN_PIPE (PIPE_DIR_IN | 1) - - /* Enums: */ - /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ - enum KeyboardHost_GetConfigDescriptorDataCodes_t - { - SuccessfulConfigRead = 0, /**< Configuration Descriptor was processed successfully */ - ControlError = 1, /**< A control request to the device failed to complete successfully */ - DescriptorTooLarge = 2, /**< The device's Configuration Descriptor is too large to process */ - InvalidConfigDataReturned = 3, /**< The device returned an invalid Configuration Descriptor */ - NoCompatibleInterfaceFound = 4, /**< A compatible interface with the required endpoints was not found */ - }; - - /* Function Prototypes: */ - uint8_t ProcessConfigurationDescriptor(void); - - uint8_t DComp_NextKeyboardInterface(void* CurrentDescriptor); - uint8_t DComp_NextKeyboardInterfaceDataEndpoint(void* CurrentDescriptor); - -#endif - diff --git a/lib/lufa/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.c b/lib/lufa/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.c deleted file mode 100644 index df73383392..0000000000 --- a/lib/lufa/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.c +++ /dev/null @@ -1,264 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Main source file for the KeyboardHost demo. This file contains the main tasks of - * the demo and is responsible for the initial application hardware configuration. - */ - -#include "KeyboardHost.h" - -/** Main program entry point. This routine configures the hardware required by the application, then - * enters a loop to run the application tasks in sequence. - */ -int main(void) -{ - SetupHardware(); - - puts_P(PSTR(ESC_FG_CYAN "Keyboard HID Host Demo running.\r\n" ESC_FG_WHITE)); - - LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); - GlobalInterruptEnable(); - - for (;;) - { - KeyboardHost_Task(); - - USB_USBTask(); - } -} - -/** Configures the board hardware and chip peripherals for the demo's functionality. */ -void SetupHardware(void) -{ -#if (ARCH == ARCH_AVR8) - /* Disable watchdog if enabled by bootloader/fuses */ - MCUSR &= ~(1 << WDRF); - wdt_disable(); - - /* Disable clock division */ - clock_prescale_set(clock_div_1); -#endif - - /* Hardware Initialization */ - Serial_Init(9600, false); - LEDs_Init(); - USB_Init(); - - /* Create a stdio stream for the serial port for stdin and stdout */ - Serial_CreateStream(NULL); -} - -/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and - * starts the library USB task to begin the enumeration and USB management process. - */ -void EVENT_USB_Host_DeviceAttached(void) -{ - puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE)); - LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); -} - -/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and - * stops the library USB task management process. - */ -void EVENT_USB_Host_DeviceUnattached(void) -{ - puts_P(PSTR(ESC_FG_GREEN "Device Unattached.\r\n" ESC_FG_WHITE)); - LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); -} - -/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully - * enumerated by the host and is now ready to be used by the application. - */ -void EVENT_USB_Host_DeviceEnumerationComplete(void) -{ - puts_P(PSTR("Getting Config Data.\r\n")); - - uint8_t ErrorCode; - - /* Get and process the configuration descriptor data */ - if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead) - { - if (ErrorCode == ControlError) - puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n")); - else - puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n")); - - printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); - - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - return; - } - - /* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */ - if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful) - { - printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n" - " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); - - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - return; - } - - /* HID class request to set the keyboard protocol to the Boot Protocol */ - USB_ControlRequest = (USB_Request_Header_t) - { - .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE), - .bRequest = HID_REQ_SetProtocol, - .wValue = 0, - .wIndex = 0, - .wLength = 0, - }; - - /* Select the control pipe for the request transfer */ - Pipe_SelectPipe(PIPE_CONTROLPIPE); - - /* Send the request, display error and wait for device detach if request fails */ - if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful) - { - printf_P(PSTR(ESC_FG_RED "Control Error (Set Protocol).\r\n" - " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); - - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - USB_Host_SetDeviceConfiguration(0); - return; - } - - puts_P(PSTR("Keyboard Enumerated.\r\n")); - LEDs_SetAllLEDs(LEDMASK_USB_READY); -} - -/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */ -void EVENT_USB_Host_HostError(const uint8_t ErrorCode) -{ - USB_Disable(); - - printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n" - " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode); - - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - for(;;); -} - -/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while - * enumerating an attached USB device. - */ -void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, - const uint8_t SubErrorCode) -{ - printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n" - " -- Error Code %d\r\n" - " -- Sub Error Code %d\r\n" - " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); - - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); -} - -/** Task to read in and processes the next report from the attached device, displaying the report - * contents on the board LEDs and via the serial port. - */ -void KeyboardHost_Task(void) -{ - if (USB_HostState != HOST_STATE_Configured) - return; - - /* Select keyboard data pipe */ - Pipe_SelectPipe(KEYBOARD_DATA_IN_PIPE); - - /* Unfreeze keyboard data pipe */ - Pipe_Unfreeze(); - - /* Check to see if a packet has been received */ - if (!(Pipe_IsINReceived())) - { - /* Refreeze HID data IN pipe */ - Pipe_Freeze(); - - return; - } - - /* Ensure pipe contains data before trying to read from it */ - if (Pipe_IsReadWriteAllowed()) - { - USB_KeyboardReport_Data_t KeyboardReport; - - /* Read in keyboard report data */ - Pipe_Read_Stream_LE(&KeyboardReport, sizeof(KeyboardReport), NULL); - - /* Indicate if the modifier byte is non-zero (special key such as shift is being pressed) */ - LEDs_ChangeLEDs(LEDS_LED1, (KeyboardReport.Modifier) ? LEDS_LED1 : 0); - - uint8_t KeyCode = KeyboardReport.KeyCode[0]; - - /* Check if a key has been pressed */ - if (KeyCode) - { - /* Toggle status LED to indicate keypress */ - LEDs_ToggleLEDs(LEDS_LED2); - - char PressedKey = 0; - - /* Retrieve pressed key character if alphanumeric */ - if ((KeyCode >= HID_KEYBOARD_SC_A) && (KeyCode <= HID_KEYBOARD_SC_Z)) - { - PressedKey = (KeyCode - HID_KEYBOARD_SC_A) + 'A'; - } - else if ((KeyCode >= HID_KEYBOARD_SC_1_AND_EXCLAMATION) & - (KeyCode < HID_KEYBOARD_SC_0_AND_CLOSING_PARENTHESIS)) - { - PressedKey = (KeyCode - HID_KEYBOARD_SC_1_AND_EXCLAMATION) + '1'; - } - else if (KeyCode == HID_KEYBOARD_SC_0_AND_CLOSING_PARENTHESIS) - { - PressedKey = '0'; - } - else if (KeyCode == HID_KEYBOARD_SC_SPACE) - { - PressedKey = ' '; - } - else if (KeyCode == HID_KEYBOARD_SC_ENTER) - { - PressedKey = '\n'; - } - - /* Print the pressed key character out through the serial port if valid */ - if (PressedKey) - putchar(PressedKey); - } - } - - /* Clear the IN endpoint, ready for next data packet */ - Pipe_ClearIN(); - - /* Refreeze keyboard data pipe */ - Pipe_Freeze(); -} - diff --git a/lib/lufa/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.h b/lib/lufa/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.h deleted file mode 100644 index 317c06565c..0000000000 --- a/lib/lufa/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for KeyboardHost.c. - */ - -#ifndef _KEYBOARD_HOST_H_ -#define _KEYBOARD_HOST_H_ - - /* Includes: */ - #include - #include - #include - #include - #include - #include - - #include - #include - #include - #include - #include - - #include "ConfigDescriptor.h" - - /* Macros: */ - /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ - #define LEDMASK_USB_NOTREADY LEDS_LED1 - - /** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */ - #define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3) - - /** LED mask for the library LED driver, to indicate that the USB interface is ready. */ - #define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4) - - /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ - #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - - /* Function Prototypes: */ - void SetupHardware(void); - void KeyboardHost_Task(void); - - void EVENT_USB_Host_HostError(const uint8_t ErrorCode); - void EVENT_USB_Host_DeviceAttached(void); - void EVENT_USB_Host_DeviceUnattached(void); - void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, - const uint8_t SubErrorCode); - void EVENT_USB_Host_DeviceEnumerationComplete(void); - -#endif - diff --git a/lib/lufa/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.txt b/lib/lufa/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.txt deleted file mode 100644 index 206ccc0118..0000000000 --- a/lib/lufa/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.txt +++ /dev/null @@ -1,73 +0,0 @@ -/** \file - * - * This file contains special DoxyGen information for the generation of the main page and other special - * documentation pages. It is not a project source file. - */ - -/** \mainpage Keyboard Host Demo - * - * \section Sec_Compat Demo Compatibility: - * - * The following list indicates what microcontrollers are compatible with this demo. - * - * \li Series 7 USB AVRs (AT90USBxxx7) - * - * \section Sec_Info USB Information: - * - * The following table gives a rundown of the USB utilization of this demo. - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - *
USB Mode:Host
USB Class:Human Interface Device (HID)
USB Subclass:N/A
Relevant Standards:USBIF HID Specification \n - * USBIF HID Usage Tables
Supported USB Speeds:Low Speed Mode \n - * Full Speed Mode
- * - * \section Sec_Description Project Description: - * - * Keyboard host demonstration application. This gives a simple reference - * application for implementing a USB keyboard host, for USB keyboards using - * the standard keyboard HID profile. - * - * Pressed alpha-numeric, enter or space key is transmitted through the serial - * USART at serial settings 9600, 8, N, 1. - * - * This uses a naive method where the keyboard is set to Boot Protocol mode, so - * that the report structure is fixed and known. A better implementation - * uses the HID report parser for correct report data processing across - * all compatible mice with advanced characteristics, as shown in the - * KeyboardHostWithParser demo application. - * - * Currently only single interface keyboards are supported. - * - * \section Sec_Options Project Options - * - * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. - * - * - * - * - * - *
- * None - *
- */ - diff --git a/lib/lufa/Demos/Host/LowLevel/KeyboardHost/asf.xml b/lib/lufa/Demos/Host/LowLevel/KeyboardHost/asf.xml deleted file mode 100644 index 2da7ed7fc6..0000000000 --- a/lib/lufa/Demos/Host/LowLevel/KeyboardHost/asf.xml +++ /dev/null @@ -1,50 +0,0 @@ - - - - - - - - - - - - - - - - Keyboard HID Host demo, implementing a basic USB keyboard host that can display key press data on the board LEDs. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/lib/lufa/Demos/Host/LowLevel/KeyboardHost/doxyfile b/lib/lufa/Demos/Host/LowLevel/KeyboardHost/doxyfile deleted file mode 100644 index 968ab03f18..0000000000 --- a/lib/lufa/Demos/Host/LowLevel/KeyboardHost/doxyfile +++ /dev/null @@ -1,2395 +0,0 @@ -# Doxyfile 1.8.9 - -# This file describes the settings to be used by the documentation system -# doxygen (www.doxygen.org) for a project. -# -# All text after a double hash (##) is considered a comment and is placed in -# front of the TAG it is preceding. -# -# All text after a single hash (#) is considered a comment and will be ignored. -# The format is: -# TAG = value [value, ...] -# For lists, items can also be appended using: -# TAG += value [value, ...] -# Values that contain spaces should be placed between quotes (\" \"). - -#--------------------------------------------------------------------------- -# Project related configuration options -#--------------------------------------------------------------------------- - -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. -# The default value is: UTF-8. - -DOXYFILE_ENCODING = UTF-8 - -# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by -# double-quotes, unless you are using Doxywizard) that should identify the -# project for which the documentation is generated. This name is used in the -# title of most generated pages and in a few other places. -# The default value is: My Project. - -PROJECT_NAME = "LUFA Library - Keyboard Host Demo" - -# The PROJECT_NUMBER tag can be used to enter a project or revision number. This -# could be handy for archiving the generated documentation or if some version -# control system is used. - -PROJECT_NUMBER = - -# Using the PROJECT_BRIEF tag one can provide an optional one line description -# for a project that appears at the top of each page and should give viewer a -# quick idea about the purpose of the project. Keep the description short. - -PROJECT_BRIEF = - -# With the PROJECT_LOGO tag one can specify a logo or an icon that is included -# in the documentation. The maximum height of the logo should not exceed 55 -# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy -# the logo to the output directory. - -PROJECT_LOGO = - -# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path -# into which the generated documentation will be written. If a relative path is -# entered, it will be relative to the location where doxygen was started. If -# left blank the current directory will be used. - -OUTPUT_DIRECTORY = ./Documentation/ - -# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- -# directories (in 2 levels) under the output directory of each output format and -# will distribute the generated files over these directories. Enabling this -# option can be useful when feeding doxygen a huge amount of source files, where -# putting all generated files in the same directory would otherwise causes -# performance problems for the file system. -# The default value is: NO. - -CREATE_SUBDIRS = NO - -# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII -# characters to appear in the names of generated files. If set to NO, non-ASCII -# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode -# U+3044. -# The default value is: NO. - -ALLOW_UNICODE_NAMES = NO - -# The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, -# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), -# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, -# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), -# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, -# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, -# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, -# Ukrainian and Vietnamese. -# The default value is: English. - -OUTPUT_LANGUAGE = English - -# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member -# descriptions after the members that are listed in the file and class -# documentation (similar to Javadoc). Set to NO to disable this. -# The default value is: YES. - -BRIEF_MEMBER_DESC = YES - -# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief -# description of a member or function before the detailed description -# -# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the -# brief descriptions will be completely suppressed. -# The default value is: YES. - -REPEAT_BRIEF = YES - -# This tag implements a quasi-intelligent brief description abbreviator that is -# used to form the text in various listings. Each string in this list, if found -# as the leading text of the brief description, will be stripped from the text -# and the result, after processing the whole list, is used as the annotated -# text. Otherwise, the brief description is used as-is. If left blank, the -# following values are used ($name is automatically replaced with the name of -# the entity):The $name class, The $name widget, The $name file, is, provides, -# specifies, contains, represents, a, an and the. - -ABBREVIATE_BRIEF = "The $name class" \ - "The $name widget" \ - "The $name file" \ - is \ - provides \ - specifies \ - contains \ - represents \ - a \ - an \ - the - -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# doxygen will generate a detailed section even if there is only a brief -# description. -# The default value is: NO. - -ALWAYS_DETAILED_SEC = NO - -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all -# inherited members of a class in the documentation of that class as if those -# members were ordinary class members. Constructors, destructors and assignment -# operators of the base classes will not be shown. -# The default value is: NO. - -INLINE_INHERITED_MEMB = NO - -# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path -# before files name in the file list and in the header files. If set to NO the -# shortest path that makes the file name unique will be used -# The default value is: YES. - -FULL_PATH_NAMES = YES - -# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. -# Stripping is only done if one of the specified strings matches the left-hand -# part of the path. The tag can be used to show relative paths in the file list. -# If left blank the directory from which doxygen is run is used as the path to -# strip. -# -# Note that you can specify absolute paths here, but also relative paths, which -# will be relative from the directory where doxygen is started. -# This tag requires that the tag FULL_PATH_NAMES is set to YES. - -STRIP_FROM_PATH = - -# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the -# path mentioned in the documentation of a class, which tells the reader which -# header file to include in order to use a class. If left blank only the name of -# the header file containing the class definition is used. Otherwise one should -# specify the list of include paths that are normally passed to the compiler -# using the -I flag. - -STRIP_FROM_INC_PATH = - -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but -# less readable) file names. This can be useful is your file systems doesn't -# support long names like on DOS, Mac, or CD-ROM. -# The default value is: NO. - -SHORT_NAMES = YES - -# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the -# first line (until the first dot) of a Javadoc-style comment as the brief -# description. If set to NO, the Javadoc-style will behave just like regular Qt- -# style comments (thus requiring an explicit @brief command for a brief -# description.) -# The default value is: NO. - -JAVADOC_AUTOBRIEF = NO - -# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first -# line (until the first dot) of a Qt-style comment as the brief description. If -# set to NO, the Qt-style will behave just like regular Qt-style comments (thus -# requiring an explicit \brief command for a brief description.) -# The default value is: NO. - -QT_AUTOBRIEF = NO - -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a -# multi-line C++ special comment block (i.e. a block of //! or /// comments) as -# a brief description. This used to be the default behavior. The new default is -# to treat a multi-line C++ comment block as a detailed description. Set this -# tag to YES if you prefer the old behavior instead. -# -# Note that setting this tag to YES also means that rational rose comments are -# not recognized any more. -# The default value is: NO. - -MULTILINE_CPP_IS_BRIEF = NO - -# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the -# documentation from any documented member that it re-implements. -# The default value is: YES. - -INHERIT_DOCS = YES - -# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new -# page for each member. If set to NO, the documentation of a member will be part -# of the file/class/namespace that contains it. -# The default value is: NO. - -SEPARATE_MEMBER_PAGES = NO - -# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen -# uses this value to replace tabs by spaces in code fragments. -# Minimum value: 1, maximum value: 16, default value: 4. - -TAB_SIZE = 4 - -# This tag can be used to specify a number of aliases that act as commands in -# the documentation. An alias has the form: -# name=value -# For example adding -# "sideeffect=@par Side Effects:\n" -# will allow you to put the command \sideeffect (or @sideeffect) in the -# documentation, which will result in a user-defined paragraph with heading -# "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. - -ALIASES = - -# This tag can be used to specify a number of word-keyword mappings (TCL only). -# A mapping has the form "name=value". For example adding "class=itcl::class" -# will allow you to use the command class in the itcl::class meaning. - -TCL_SUBST = - -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources -# only. Doxygen will then generate output that is more tailored for C. For -# instance, some of the names that are used will be different. The list of all -# members will be omitted, etc. -# The default value is: NO. - -OPTIMIZE_OUTPUT_FOR_C = YES - -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or -# Python sources only. Doxygen will then generate output that is more tailored -# for that language. For instance, namespaces will be presented as packages, -# qualified scopes will look different, etc. -# The default value is: NO. - -OPTIMIZE_OUTPUT_JAVA = NO - -# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran -# sources. Doxygen will then generate output that is tailored for Fortran. -# The default value is: NO. - -OPTIMIZE_FOR_FORTRAN = NO - -# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL -# sources. Doxygen will then generate output that is tailored for VHDL. -# The default value is: NO. - -OPTIMIZE_OUTPUT_VHDL = NO - -# Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given -# extension. Doxygen has a built-in mapping, but you can override or extend it -# using this tag. The format is ext=language, where ext is a file extension, and -# language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. -# -# Note: For files without extension you can use no_extension as a placeholder. -# -# Note that for custom extensions you also need to set FILE_PATTERNS otherwise -# the files are not read by doxygen. - -EXTENSION_MAPPING = - -# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments -# according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. -# The output of markdown processing is further processed by doxygen, so you can -# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in -# case of backward compatibilities issues. -# The default value is: YES. - -MARKDOWN_SUPPORT = NO - -# When enabled doxygen tries to link words that correspond to documented -# classes, or namespaces to their corresponding documentation. Such a link can -# be prevented in individual cases by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. -# The default value is: YES. - -AUTOLINK_SUPPORT = YES - -# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want -# to include (a tag file for) the STL sources as input, then you should set this -# tag to YES in order to let doxygen match functions declarations and -# definitions whose arguments contain STL classes (e.g. func(std::string); -# versus func(std::string) {}). This also make the inheritance and collaboration -# diagrams that involve STL classes more complete and accurate. -# The default value is: NO. - -BUILTIN_STL_SUPPORT = NO - -# If you use Microsoft's C++/CLI language, you should set this option to YES to -# enable parsing support. -# The default value is: NO. - -CPP_CLI_SUPPORT = NO - -# Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen -# will parse them like normal C++ but will assume all classes use public instead -# of private inheritance when no explicit protection keyword is present. -# The default value is: NO. - -SIP_SUPPORT = NO - -# For Microsoft's IDL there are propget and propput attributes to indicate -# getter and setter methods for a property. Setting this option to YES will make -# doxygen to replace the get and set methods by a property in the documentation. -# This will only work if the methods are indeed getting or setting a simple -# type. If this is not the case, or you want to show the methods anyway, you -# should set this option to NO. -# The default value is: YES. - -IDL_PROPERTY_SUPPORT = YES - -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default -# all members of a group must be documented explicitly. -# The default value is: NO. - -DISTRIBUTE_GROUP_DOC = NO - -# Set the SUBGROUPING tag to YES to allow class member groups of the same type -# (for instance a group of public functions) to be put as a subgroup of that -# type (e.g. under the Public Functions section). Set it to NO to prevent -# subgrouping. Alternatively, this can be done per class using the -# \nosubgrouping command. -# The default value is: YES. - -SUBGROUPING = YES - -# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions -# are shown inside the group in which they are included (e.g. using \ingroup) -# instead of on a separate page (for HTML and Man pages) or section (for LaTeX -# and RTF). -# -# Note that this feature does not work in combination with -# SEPARATE_MEMBER_PAGES. -# The default value is: NO. - -INLINE_GROUPED_CLASSES = NO - -# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions -# with only public data fields or simple typedef fields will be shown inline in -# the documentation of the scope in which they are defined (i.e. file, -# namespace, or group documentation), provided this scope is documented. If set -# to NO, structs, classes, and unions are shown on a separate page (for HTML and -# Man pages) or section (for LaTeX and RTF). -# The default value is: NO. - -INLINE_SIMPLE_STRUCTS = NO - -# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or -# enum is documented as struct, union, or enum with the name of the typedef. So -# typedef struct TypeS {} TypeT, will appear in the documentation as a struct -# with name TypeT. When disabled the typedef will appear as a member of a file, -# namespace, or class. And the struct will be named TypeS. This can typically be -# useful for C code in case the coding convention dictates that all compound -# types are typedef'ed and only the typedef is referenced, never the tag name. -# The default value is: NO. - -TYPEDEF_HIDES_STRUCT = NO - -# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This -# cache is used to resolve symbols given their name and scope. Since this can be -# an expensive process and often the same symbol appears multiple times in the -# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small -# doxygen will become slower. If the cache is too large, memory is wasted. The -# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range -# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 -# symbols. At the end of a run doxygen will report the cache usage and suggest -# the optimal cache size from a speed point of view. -# Minimum value: 0, maximum value: 9, default value: 0. - -LOOKUP_CACHE_SIZE = 0 - -#--------------------------------------------------------------------------- -# Build related configuration options -#--------------------------------------------------------------------------- - -# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in -# documentation are documented, even if no documentation was available. Private -# class members and static file members will be hidden unless the -# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. -# Note: This will also disable the warnings about undocumented members that are -# normally produced when WARNINGS is set to YES. -# The default value is: NO. - -EXTRACT_ALL = YES - -# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will -# be included in the documentation. -# The default value is: NO. - -EXTRACT_PRIVATE = YES - -# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal -# scope will be included in the documentation. -# The default value is: NO. - -EXTRACT_PACKAGE = NO - -# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be -# included in the documentation. -# The default value is: NO. - -EXTRACT_STATIC = YES - -# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined -# locally in source files will be included in the documentation. If set to NO, -# only classes defined in header files are included. Does not have any effect -# for Java sources. -# The default value is: YES. - -EXTRACT_LOCAL_CLASSES = YES - -# This flag is only useful for Objective-C code. If set to YES, local methods, -# which are defined in the implementation section but not in the interface are -# included in the documentation. If set to NO, only methods in the interface are -# included. -# The default value is: NO. - -EXTRACT_LOCAL_METHODS = NO - -# If this flag is set to YES, the members of anonymous namespaces will be -# extracted and appear in the documentation as a namespace called -# 'anonymous_namespace{file}', where file will be replaced with the base name of -# the file that contains the anonymous namespace. By default anonymous namespace -# are hidden. -# The default value is: NO. - -EXTRACT_ANON_NSPACES = NO - -# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all -# undocumented members inside documented classes or files. If set to NO these -# members will be included in the various overviews, but no documentation -# section is generated. This option has no effect if EXTRACT_ALL is enabled. -# The default value is: NO. - -HIDE_UNDOC_MEMBERS = NO - -# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all -# undocumented classes that are normally visible in the class hierarchy. If set -# to NO, these classes will be included in the various overviews. This option -# has no effect if EXTRACT_ALL is enabled. -# The default value is: NO. - -HIDE_UNDOC_CLASSES = NO - -# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend -# (class|struct|union) declarations. If set to NO, these declarations will be -# included in the documentation. -# The default value is: NO. - -HIDE_FRIEND_COMPOUNDS = NO - -# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any -# documentation blocks found inside the body of a function. If set to NO, these -# blocks will be appended to the function's detailed documentation block. -# The default value is: NO. - -HIDE_IN_BODY_DOCS = NO - -# The INTERNAL_DOCS tag determines if documentation that is typed after a -# \internal command is included. If the tag is set to NO then the documentation -# will be excluded. Set it to YES to include the internal documentation. -# The default value is: NO. - -INTERNAL_DOCS = NO - -# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file -# names in lower-case letters. If set to YES, upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. -# The default value is: system dependent. - -CASE_SENSE_NAMES = NO - -# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with -# their full class and namespace scopes in the documentation. If set to YES, the -# scope will be hidden. -# The default value is: NO. - -HIDE_SCOPE_NAMES = NO - -# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will -# append additional text to a page's title, such as Class Reference. If set to -# YES the compound reference will be hidden. -# The default value is: NO. - -HIDE_COMPOUND_REFERENCE= NO - -# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of -# the files that are included by a file in the documentation of that file. -# The default value is: YES. - -SHOW_INCLUDE_FILES = YES - -# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each -# grouped member an include statement to the documentation, telling the reader -# which file to include in order to use the member. -# The default value is: NO. - -SHOW_GROUPED_MEMB_INC = NO - -# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include -# files with double quotes in the documentation rather than with sharp brackets. -# The default value is: NO. - -FORCE_LOCAL_INCLUDES = NO - -# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the -# documentation for inline members. -# The default value is: YES. - -INLINE_INFO = YES - -# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the -# (detailed) documentation of file and class members alphabetically by member -# name. If set to NO, the members will appear in declaration order. -# The default value is: YES. - -SORT_MEMBER_DOCS = YES - -# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief -# descriptions of file, namespace and class members alphabetically by member -# name. If set to NO, the members will appear in declaration order. Note that -# this will also influence the order of the classes in the class list. -# The default value is: NO. - -SORT_BRIEF_DOCS = NO - -# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the -# (brief and detailed) documentation of class members so that constructors and -# destructors are listed first. If set to NO the constructors will appear in the -# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. -# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief -# member documentation. -# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting -# detailed member documentation. -# The default value is: NO. - -SORT_MEMBERS_CTORS_1ST = NO - -# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy -# of group names into alphabetical order. If set to NO the group names will -# appear in their defined order. -# The default value is: NO. - -SORT_GROUP_NAMES = NO - -# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by -# fully-qualified names, including namespaces. If set to NO, the class list will -# be sorted only by class name, not including the namespace part. -# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. -# Note: This option applies only to the class list, not to the alphabetical -# list. -# The default value is: NO. - -SORT_BY_SCOPE_NAME = NO - -# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper -# type resolution of all parameters of a function it will reject a match between -# the prototype and the implementation of a member function even if there is -# only one candidate or it is obvious which candidate to choose by doing a -# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still -# accept a match between prototype and implementation in such cases. -# The default value is: NO. - -STRICT_PROTO_MATCHING = NO - -# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo -# list. This list is created by putting \todo commands in the documentation. -# The default value is: YES. - -GENERATE_TODOLIST = NO - -# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test -# list. This list is created by putting \test commands in the documentation. -# The default value is: YES. - -GENERATE_TESTLIST = NO - -# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug -# list. This list is created by putting \bug commands in the documentation. -# The default value is: YES. - -GENERATE_BUGLIST = NO - -# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO) -# the deprecated list. This list is created by putting \deprecated commands in -# the documentation. -# The default value is: YES. - -GENERATE_DEPRECATEDLIST= YES - -# The ENABLED_SECTIONS tag can be used to enable conditional documentation -# sections, marked by \if ... \endif and \cond -# ... \endcond blocks. - -ENABLED_SECTIONS = - -# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the -# initial value of a variable or macro / define can have for it to appear in the -# documentation. If the initializer consists of more lines than specified here -# it will be hidden. Use a value of 0 to hide initializers completely. The -# appearance of the value of individual variables and macros / defines can be -# controlled using \showinitializer or \hideinitializer command in the -# documentation regardless of this setting. -# Minimum value: 0, maximum value: 10000, default value: 30. - -MAX_INITIALIZER_LINES = 30 - -# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at -# the bottom of the documentation of classes and structs. If set to YES, the -# list will mention the files that were used to generate the documentation. -# The default value is: YES. - -SHOW_USED_FILES = YES - -# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This -# will remove the Files entry from the Quick Index and from the Folder Tree View -# (if specified). -# The default value is: YES. - -SHOW_FILES = YES - -# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces -# page. This will remove the Namespaces entry from the Quick Index and from the -# Folder Tree View (if specified). -# The default value is: YES. - -SHOW_NAMESPACES = YES - -# The FILE_VERSION_FILTER tag can be used to specify a program or script that -# doxygen should invoke to get the current version for each file (typically from -# the version control system). Doxygen will invoke the program by executing (via -# popen()) the command command input-file, where command is the value of the -# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided -# by doxygen. Whatever the program writes to standard output is used as the file -# version. For an example see the documentation. - -FILE_VERSION_FILTER = - -# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed -# by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. To create the layout file -# that represents doxygen's defaults, run doxygen with the -l option. You can -# optionally specify a file name after the option, if omitted DoxygenLayout.xml -# will be used as the name of the layout file. -# -# Note that if you run doxygen from a directory containing a file called -# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE -# tag is left empty. - -LAYOUT_FILE = - -# The CITE_BIB_FILES tag can be used to specify one or more bib files containing -# the reference definitions. This must be a list of .bib files. The .bib -# extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. -# For LaTeX the style of the bibliography can be controlled using -# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the -# search path. See also \cite for info how to create references. - -CITE_BIB_FILES = - -#--------------------------------------------------------------------------- -# Configuration options related to warning and progress messages -#--------------------------------------------------------------------------- - -# The QUIET tag can be used to turn on/off the messages that are generated to -# standard output by doxygen. If QUIET is set to YES this implies that the -# messages are off. -# The default value is: NO. - -QUIET = YES - -# The WARNINGS tag can be used to turn on/off the warning messages that are -# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES -# this implies that the warnings are on. -# -# Tip: Turn warnings on while writing the documentation. -# The default value is: YES. - -WARNINGS = YES - -# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate -# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag -# will automatically be disabled. -# The default value is: YES. - -WARN_IF_UNDOCUMENTED = YES - -# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some parameters -# in a documented function, or documenting parameters that don't exist or using -# markup commands wrongly. -# The default value is: YES. - -WARN_IF_DOC_ERROR = YES - -# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that -# are documented, but have no documentation for their parameters or return -# value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. -# The default value is: NO. - -WARN_NO_PARAMDOC = YES - -# The WARN_FORMAT tag determines the format of the warning messages that doxygen -# can produce. The string should contain the $file, $line, and $text tags, which -# will be replaced by the file and line number from which the warning originated -# and the warning text. Optionally the format may contain $version, which will -# be replaced by the version of the file (if it could be obtained via -# FILE_VERSION_FILTER) -# The default value is: $file:$line: $text. - -WARN_FORMAT = "$file:$lin