From cf4575b94a3c65e6535a159fc71fc885aebc2620 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Fri, 2 Aug 2019 14:02:40 -0700 Subject: Fix the LUFA lib to use a submodule instead of just files (#6245) * Remove LUFA files * Update descriptions for newer version of LUFA * Create PR6245.md * Fix CDC(Serial) type errors * Fix missed merge conflict for AUDIO_DTYPE_CSInterface --- .../MouseHostDevice/Config/LUFAConfig.h | 93 - .../ClassDriver/MouseHostDevice/Descriptors.c | 221 -- .../ClassDriver/MouseHostDevice/Descriptors.h | 93 - .../ClassDriver/MouseHostDevice/DeviceFunctions.c | 155 -- .../ClassDriver/MouseHostDevice/DeviceFunctions.h | 64 - .../ClassDriver/MouseHostDevice/HostFunctions.c | 184 -- .../ClassDriver/MouseHostDevice/HostFunctions.h | 56 - .../ClassDriver/MouseHostDevice/MouseHostDevice.c | 99 - .../ClassDriver/MouseHostDevice/MouseHostDevice.h | 78 - .../MouseHostDevice/MouseHostDevice.txt | 80 - .../DualRole/ClassDriver/MouseHostDevice/asf.xml | 56 - .../DualRole/ClassDriver/MouseHostDevice/doxyfile | 2395 -------------------- .../DualRole/ClassDriver/MouseHostDevice/makefile | 43 - lib/lufa/Demos/DualRole/ClassDriver/makefile | 46 - 14 files changed, 3663 deletions(-) delete mode 100644 lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/Config/LUFAConfig.h delete mode 100644 lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.c delete mode 100644 lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.h delete mode 100644 lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.c delete mode 100644 lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.h delete mode 100644 lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.c delete mode 100644 lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.h delete mode 100644 lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.c delete mode 100644 lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.h delete mode 100644 lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.txt delete mode 100644 lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/asf.xml delete mode 100644 lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/doxyfile delete mode 100644 lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/makefile delete mode 100644 lib/lufa/Demos/DualRole/ClassDriver/makefile (limited to 'lib/lufa/Demos/DualRole/ClassDriver') diff --git a/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/Config/LUFAConfig.h b/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/Config/LUFAConfig.h deleted file mode 100644 index 0a8074e71b..0000000000 --- a/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/Config/LUFAConfig.h +++ /dev/null @@ -1,93 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief LUFA Library Configuration Header File - * - * This header file is used to configure LUFA's compile time options, - * as an alternative to the compile time constants supplied through - * a makefile. - * - * For information on what each token does, refer to the LUFA - * manual section "Summary of Compile Tokens". - */ - -#ifndef _LUFA_CONFIG_H_ -#define _LUFA_CONFIG_H_ - - #if (ARCH == ARCH_AVR8) - - /* Non-USB Related Configuration Tokens: */ -// #define DISABLE_TERMINAL_CODES - - /* USB Class Driver Related Tokens: */ -// #define HID_HOST_BOOT_PROTOCOL_ONLY -// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} -// #define HID_USAGE_STACK_DEPTH {Insert Value Here} -// #define HID_MAX_COLLECTIONS {Insert Value Here} -// #define HID_MAX_REPORTITEMS {Insert Value Here} -// #define HID_MAX_REPORT_IDS {Insert Value Here} -// #define NO_CLASS_DRIVER_AUTOFLUSH - - /* General USB Driver Related Tokens: */ -// #define ORDERED_EP_CONFIG - #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) -// #define USB_DEVICE_ONLY -// #define USB_HOST_ONLY -// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} -// #define NO_LIMITED_CONTROLLER_CONNECT -// #define NO_SOF_EVENTS - - /* USB Device Mode Driver Related Tokens: */ -// #define USE_RAM_DESCRIPTORS - #define USE_FLASH_DESCRIPTORS -// #define USE_EEPROM_DESCRIPTORS -// #define NO_INTERNAL_SERIAL - #define FIXED_CONTROL_ENDPOINT_SIZE 8 -// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} - #define FIXED_NUM_CONFIGURATIONS 1 -// #define CONTROL_ONLY_DEVICE -// #define INTERRUPT_CONTROL_ENDPOINT -// #define NO_DEVICE_REMOTE_WAKEUP -// #define NO_DEVICE_SELF_POWER - - /* USB Host Mode Driver Related Tokens: */ -// #define HOST_STATE_AS_GPIOR {Insert Value Here} -// #define USB_HOST_TIMEOUT_MS {Insert Value Here} -// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} -// #define NO_AUTO_VBUS_MANAGEMENT -// #define INVERTED_VBUS_ENABLE_LINE - - #else - - #error Unsupported architecture for this LUFA configuration file. - - #endif -#endif diff --git a/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.c b/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.c deleted file mode 100644 index 9889422a56..0000000000 --- a/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.c +++ /dev/null @@ -1,221 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special - * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. - */ - -#include "Descriptors.h" - -/** HID class report descriptor. This is a special descriptor constructed with values from the - * USBIF HID class specification to describe the reports and capabilities of the HID device. This - * descriptor is parsed by the host and its contents used to determine what data (and in what encoding) - * the device will send, and what it may be sent back from the host. Refer to the HID specification for - * more details on HID report descriptors. - */ -const USB_Descriptor_HIDReport_Datatype_t PROGMEM MouseReport[] = -{ - /* Use the HID class driver's standard Mouse report. - * Min X/Y Axis values: -1 - * Max X/Y Axis values: 1 - * Min physical X/Y Axis values (used to determine resolution): -1 - * Max physical X/Y Axis values (used to determine resolution): 1 - * Buttons: 3 - * Absolute screen coordinates: false - */ - HID_DESCRIPTOR_MOUSE(-1, 1, -1, 1, 3, false) -}; - -/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall - * device characteristics, including the supported USB version, control endpoint size and the - * number of device configurations. The descriptor is read out by the USB host when the enumeration - * process begins. - */ -const USB_Descriptor_Device_t PROGMEM DeviceDescriptor = -{ - .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - - .USBSpecification = VERSION_BCD(1,1,0), - .Class = USB_CSCP_NoDeviceClass, - .SubClass = USB_CSCP_NoDeviceSubclass, - .Protocol = USB_CSCP_NoDeviceProtocol, - - .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - - .VendorID = 0x03EB, - .ProductID = 0x2041, - .ReleaseNumber = 0x0000, - - .ManufacturerStrIndex = STRING_ID_Manufacturer, - .ProductStrIndex = STRING_ID_Product, - .SerialNumStrIndex = NO_DESCRIPTOR, - - .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS -}; - -/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage - * of the device in one of its supported configurations, including information about any device interfaces - * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting - * a configuration so that the host may correctly communicate with the USB device. - */ -const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = -{ - .Config = - { - .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, - - .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), - .TotalInterfaces = 1, - - .ConfigurationNumber = 1, - .ConfigurationStrIndex = NO_DESCRIPTOR, - - .ConfigAttributes = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED), - - .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) - }, - - .HID_Interface = - { - .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, - - .InterfaceNumber = INTERFACE_ID_Mouse, - .AlternateSetting = 0x00, - - .TotalEndpoints = 1, - - .Class = HID_CSCP_HIDClass, - .SubClass = HID_CSCP_BootSubclass, - .Protocol = HID_CSCP_MouseBootProtocol, - - .InterfaceStrIndex = NO_DESCRIPTOR - }, - - .HID_MouseHID = - { - .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, - - .HIDSpec = VERSION_BCD(1,1,1), - .CountryCode = 0x00, - .TotalReportDescriptors = 1, - .HIDReportType = HID_DTYPE_Report, - .HIDReportLength = sizeof(MouseReport) - }, - - .HID_ReportINEndpoint = - { - .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - - .EndpointAddress = MOUSE_EPADDR, - .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), - .EndpointSize = MOUSE_EPSIZE, - .PollingIntervalMS = 0x05 - } -}; - -/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests - * the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate - * via the language ID table available at USB.org what languages the device supports for its string descriptors. - */ -const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG); - -/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable - * form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device - * Descriptor. - */ -const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera"); - -/** Product descriptor string. This is a Unicode string containing the product's details in human readable form, - * and is read out upon request by the host when the appropriate string ID is requested, listed in the Device - * Descriptor. - */ -const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Mouse Demo"); - -/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors" - * documentation) by the application code so that the address and size of a requested descriptor can be given - * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function - * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the - * USB host. - */ -uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, - const uint16_t wIndex, - const void** const DescriptorAddress) -{ - const uint8_t DescriptorType = (wValue >> 8); - const uint8_t DescriptorNumber = (wValue & 0xFF); - - const void* Address = NULL; - uint16_t Size = NO_DESCRIPTOR; - - switch (DescriptorType) - { - case DTYPE_Device: - Address = &DeviceDescriptor; - Size = sizeof(USB_Descriptor_Device_t); - break; - case DTYPE_Configuration: - Address = &ConfigurationDescriptor; - Size = sizeof(USB_Descriptor_Configuration_t); - break; - case DTYPE_String: - switch (DescriptorNumber) - { - case STRING_ID_Language: - Address = &LanguageString; - Size = pgm_read_byte(&LanguageString.Header.Size); - break; - case STRING_ID_Manufacturer: - Address = &ManufacturerString; - Size = pgm_read_byte(&ManufacturerString.Header.Size); - break; - case STRING_ID_Product: - Address = &ProductString; - Size = pgm_read_byte(&ProductString.Header.Size); - break; - } - - break; - case HID_DTYPE_HID: - Address = &ConfigurationDescriptor.HID_MouseHID; - Size = sizeof(USB_HID_Descriptor_HID_t); - break; - case HID_DTYPE_Report: - Address = &MouseReport; - Size = sizeof(MouseReport); - break; - } - - *DescriptorAddress = Address; - return Size; -} - diff --git a/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.h b/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.h deleted file mode 100644 index d5fdd3c888..0000000000 --- a/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.h +++ /dev/null @@ -1,93 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for Descriptors.c. - */ - -#ifndef _DESCRIPTORS_H_ -#define _DESCRIPTORS_H_ - - /* Includes: */ - #include - - #include - - /* Type Defines: */ - /** Type define for the device configuration descriptor structure. This must be defined in the - * application code, as the configuration descriptor contains several sub-descriptors which - * vary between devices, and which describe the device's usage to the host. - */ - typedef struct - { - USB_Descriptor_Configuration_Header_t Config; - - // Mouse HID Interface - USB_Descriptor_Interface_t HID_Interface; - USB_HID_Descriptor_HID_t HID_MouseHID; - USB_Descriptor_Endpoint_t HID_ReportINEndpoint; - } USB_Descriptor_Configuration_t; - - /** Enum for the device interface descriptor IDs within the device. Each interface descriptor - * should have a unique ID index associated with it, which can be used to refer to the - * interface from other descriptors. - */ - enum InterfaceDescriptors_t - { - INTERFACE_ID_Mouse = 0, /**< Mouse interface descriptor ID (must be zero) */ - }; - - /** Enum for the device string descriptor IDs within the device. Each string descriptor should - * have a unique ID index associated with it, which can be used to refer to the string from - * other descriptors. - */ - enum StringDescriptors_t - { - STRING_ID_Language = 0, /**< Supported Languages string descriptor ID (must be zero) */ - STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */ - STRING_ID_Product = 2, /**< Product string ID */ - }; - - /* Macros: */ - /** Endpoint address of the Mouse HID reporting IN endpoint. */ - #define MOUSE_EPADDR (ENDPOINT_DIR_IN | 1) - - /** Size in bytes of the Mouse HID reporting IN endpoint. */ - #define MOUSE_EPSIZE 8 - - /* Function Prototypes: */ - uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, - const uint16_t wIndex, - const void** const DescriptorAddress) - ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); - -#endif - diff --git a/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.c b/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.c deleted file mode 100644 index 3598462be6..0000000000 --- a/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Device Mode USB Mouse functionality for the MouseHostDevice demo. This file contains the Device mode - * USB Mouse related code of the demo and is responsible for all the Device mode Mouse functionality. - */ - -#include "DeviceFunctions.h" - -/** Buffer to hold the previously generated Mouse Device HID report, for comparison purposes inside the HID class driver. */ -static uint8_t PrevMouseHIDReportBuffer[sizeof(USB_MouseReport_Data_t)]; - -/** LUFA HID Class driver interface configuration and state information. This structure is - * passed to all HID Class driver functions, so that multiple instances of the same class - * within a device can be differentiated from one another. - */ -USB_ClassInfo_HID_Device_t Mouse_HID_Device_Interface = - { - .Config = - { - .InterfaceNumber = INTERFACE_ID_Mouse, - .ReportINEndpoint = - { - .Address = MOUSE_EPADDR, - .Size = MOUSE_EPSIZE, - .Banks = 1, - }, - .PrevReportINBuffer = PrevMouseHIDReportBuffer, - .PrevReportINBufferSize = sizeof(PrevMouseHIDReportBuffer), - }, - }; - - -/** Event handler for the library USB WakeUp event. */ -void EVENT_USB_Device_Connect(void) -{ - LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); -} - -/** Event handler for the library USB Suspend event. */ -void EVENT_USB_Device_Disconnect(void) -{ - LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); -} - -/** Event handler for the library USB Configuration Changed event. */ -void EVENT_USB_Device_ConfigurationChanged(void) -{ - LEDs_SetAllLEDs(LEDMASK_USB_READY); - - if (!(HID_Device_ConfigureEndpoints(&Mouse_HID_Device_Interface))) - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - - USB_Device_EnableSOFEvents(); -} - -/** Event handler for the library USB Control Request reception event. */ -void EVENT_USB_Device_ControlRequest(void) -{ - HID_Device_ProcessControlRequest(&Mouse_HID_Device_Interface); -} - -/** Event handler for the USB device Start Of Frame event. */ -void EVENT_USB_Device_StartOfFrame(void) -{ - HID_Device_MillisecondElapsed(&Mouse_HID_Device_Interface); -} - -/** HID class driver callback function for the creation of HID reports to the host. - * - * \param[in] HIDInterfaceInfo Pointer to the HID class interface configuration structure being referenced - * \param[in,out] ReportID Report ID requested by the host if non-zero, otherwise callback should set to the generated report ID - * \param[in] ReportType Type of the report to create, either HID_REPORT_ITEM_In or HID_REPORT_ITEM_Feature - * \param[out] ReportData Pointer to a buffer where the created report should be stored - * \param[out] ReportSize Number of bytes written in the report (or zero if no report is to be sent) - * - * \return Boolean \c true to force the sending of the report, \c false to let the library determine if it needs to be sent - */ -bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, - uint8_t* const ReportID, - const uint8_t ReportType, - void* ReportData, - uint16_t* const ReportSize) -{ - USB_MouseReport_Data_t* MouseReport = (USB_MouseReport_Data_t*)ReportData; - - uint8_t JoyStatus_LCL = Joystick_GetStatus(); - uint8_t ButtonStatus_LCL = Buttons_GetStatus(); - - if (JoyStatus_LCL & JOY_UP) - MouseReport->Y = -1; - else if (JoyStatus_LCL & JOY_DOWN) - MouseReport->Y = 1; - - if (JoyStatus_LCL & JOY_RIGHT) - MouseReport->X = 1; - else if (JoyStatus_LCL & JOY_LEFT) - MouseReport->X = -1; - - if (JoyStatus_LCL & JOY_PRESS) - MouseReport->Button |= (1 << 0); - - if (ButtonStatus_LCL & BUTTONS_BUTTON1) - MouseReport->Button |= (1 << 1); - - *ReportSize = sizeof(USB_MouseReport_Data_t); - return true; -} - -/** HID class driver callback function for the processing of HID reports from the host. - * - * \param[in] HIDInterfaceInfo Pointer to the HID class interface configuration structure being referenced - * \param[in] ReportID Report ID of the received report from the host - * \param[in] ReportType The type of report that the host has sent, either HID_REPORT_ITEM_Out or HID_REPORT_ITEM_Feature - * \param[in] ReportData Pointer to a buffer where the received report has been stored - * \param[in] ReportSize Size in bytes of the received HID report - */ -void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, - const uint8_t ReportID, - const uint8_t ReportType, - const void* ReportData, - const uint16_t ReportSize) -{ - // Unused (but mandatory for the HID class driver) in this demo, since there are no Host->Device reports -} - diff --git a/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.h b/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.h deleted file mode 100644 index 36ad50acf3..0000000000 --- a/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for DeviceFunctions.c. - */ - -#ifndef _MOUSE_DEVICE_FUNCTIONS_H_ -#define _MOUSE_DEVICE_FUNCTIONS_H_ - - /* Includes: */ - #include "MouseHostDevice.h" - - /* External Variables: */ - extern USB_ClassInfo_HID_Device_t Mouse_HID_Device_Interface; - - /* Function Prototypes: */ - bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, - uint8_t* const ReportID, - const uint8_t ReportType, - void* ReportData, - uint16_t* const ReportSize); - void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, - const uint8_t ReportID, - const uint8_t ReportType, - const void* ReportData, - const uint16_t ReportSize); - - void EVENT_USB_Device_Connect(void); - void EVENT_USB_Device_Disconnect(void); - void EVENT_USB_Device_ConfigurationChanged(void); - void EVENT_USB_Device_ControlRequest(void); - void EVENT_USB_Device_StartOfFrame(void); - -#endif - diff --git a/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.c b/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.c deleted file mode 100644 index 8e602add1b..0000000000 --- a/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.c +++ /dev/null @@ -1,184 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Host Mode USB Mouse functionality for the MouseHostDevice demo. This file contains the Host mode - * USB Mouse related code of the demo and is responsible for all the Host mode Mouse functionality. - */ - -#include "HostFunctions.h" - -/** LUFA HID Class driver interface configuration and state information. This structure is - * passed to all HID Class driver functions, so that multiple instances of the same class - * within a device can be differentiated from one another. - */ -USB_ClassInfo_HID_Host_t Mouse_HID_Host_Interface = - { - .Config = - { - .DataINPipe = - { - .Address = (PIPE_DIR_IN | 1), - .Banks = 1, - }, - .DataINPipe = - { - .Address = (PIPE_DIR_OUT | 2), - .Banks = 1, - }, - .HIDInterfaceProtocol = HID_CSCP_MouseBootProtocol, - }, - }; - - -/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and - * starts the library USB task to begin the enumeration and USB management process. - */ -void EVENT_USB_Host_DeviceAttached(void) -{ - puts_P(PSTR("Device Attached.\r\n")); - LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); -} - -/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and - * stops the library USB task management process. - */ -void EVENT_USB_Host_DeviceUnattached(void) -{ - puts_P(PSTR("\r\nDevice Unattached.\r\n")); - LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); -} - -/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully - * enumerated by the host and is now ready to be used by the application. - */ -void EVENT_USB_Host_DeviceEnumerationComplete(void) -{ - LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); - - uint16_t ConfigDescriptorSize; - uint8_t ConfigDescriptorData[512]; - - if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData, - sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful) - { - printf("Error Retrieving Configuration Descriptor.\r\n"); - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - return; - } - - if (HID_Host_ConfigurePipes(&Mouse_HID_Host_Interface, - ConfigDescriptorSize, ConfigDescriptorData) != HID_ENUMERROR_NoError) - { - printf("Attached Device Not a Valid Mouse.\r\n"); - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - return; - } - - if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful) - { - printf("Error Setting Device Configuration.\r\n"); - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - return; - } - - if (HID_Host_SetBootProtocol(&Mouse_HID_Host_Interface) != HOST_SENDCONTROL_Successful) - { - printf("Could not Set Boot Protocol Mode.\r\n"); - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - return; - } - - printf("Mouse Enumerated.\r\n"); - LEDs_SetAllLEDs(LEDMASK_USB_READY); -} - -/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */ -void EVENT_USB_Host_HostError(const uint8_t ErrorCode) -{ - USB_Disable(); - - printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n" - " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode); - - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - for(;;); -} - -/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while - * enumerating an attached USB device. - */ -void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, - const uint8_t SubErrorCode) -{ - printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n" - " -- Error Code %d\r\n" - " -- Sub Error Code %d\r\n" - " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); - - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); -} - -/** Host USB management task. This task handles the control of USB Mice while in USB Host mode, - * setting up the appropriate data pipes and processing reports from the attached device. - */ -void MouseHost_Task(void) -{ - if (USB_HostState != HOST_STATE_Configured) - return; - - if (HID_Host_IsReportReceived(&Mouse_HID_Host_Interface)) - { - uint8_t LEDMask = LEDS_NO_LEDS; - - USB_MouseReport_Data_t MouseReport; - HID_Host_ReceiveReport(&Mouse_HID_Host_Interface, &MouseReport); - - printf_P(PSTR("dX:%2d dY:%2d Button:%d\r\n"), MouseReport.X, - MouseReport.Y, - MouseReport.Button); - if (MouseReport.X > 0) - LEDMask |= LEDS_LED1; - else if (MouseReport.X < 0) - LEDMask |= LEDS_LED2; - - if (MouseReport.Y > 0) - LEDMask |= LEDS_LED3; - else if (MouseReport.Y < 0) - LEDMask |= LEDS_LED4; - - if (MouseReport.Button) - LEDMask = LEDS_ALL_LEDS; - - LEDs_SetAllLEDs(LEDMask); - } -} - diff --git a/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.h b/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.h deleted file mode 100644 index 02d4e72474..0000000000 --- a/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for HostFunctions.c. - */ - -#ifndef _MOUSE_HOST_FUNCTIONS_H_ -#define _MOUSE_HOST_FUNCTIONS_H_ - - /* Includes: */ - #include "MouseHostDevice.h" - - /* External Variables: */ - extern USB_ClassInfo_HID_Host_t Mouse_HID_Host_Interface; - - /* Function Prototypes: */ - void MouseHost_Task(void); - - void EVENT_USB_Host_HostError(const uint8_t ErrorCode); - void EVENT_USB_Host_DeviceAttached(void); - void EVENT_USB_Host_DeviceUnattached(void); - void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, - const uint8_t SubErrorCode); - void EVENT_USB_Host_DeviceEnumerationComplete(void); - -#endif - diff --git a/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.c b/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.c deleted file mode 100644 index fc6421ac02..0000000000 --- a/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Main source file for the MouseHostDevice demo. This file contains the main tasks of - * the demo and is responsible for the overall control flow of the demo. - */ - -#include "MouseHostDevice.h" - -/** Main program entry point. This routine configures the hardware required by the application, then - * enters a loop to run the application tasks in sequence. - */ -int main(void) -{ - SetupHardware(); - - puts_P(PSTR(ESC_FG_CYAN "Mouse Host/Device Demo running.\r\n" ESC_FG_WHITE)); - - LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); - GlobalInterruptEnable(); - - for (;;) - { - /* Determine which USB mode we are currently in */ - if (USB_CurrentMode == USB_MODE_Host) - { - MouseHost_Task(); - HID_Host_USBTask(&Mouse_HID_Host_Interface); - } - else - { - HID_Device_USBTask(&Mouse_HID_Device_Interface); - } - - USB_USBTask(); - } -} - -/** Configures the board hardware and chip peripherals for the demo's functionality. */ -void SetupHardware(void) -{ -#if (ARCH == ARCH_AVR8) - /* Disable watchdog if enabled by bootloader/fuses */ - MCUSR &= ~(1 << WDRF); - wdt_disable(); - - /* Disable clock division */ - clock_prescale_set(clock_div_1); -#endif - - /* Hardware Initialization */ - Serial_Init(9600, false); - LEDs_Init(); - Joystick_Init(); - Buttons_Init(); - USB_Init(USB_MODE_UID); - - /* Create a stdio stream for the serial port for stdin and stdout */ - Serial_CreateStream(NULL); -} - -/** Event handler for the library USB mode change event. */ -void EVENT_USB_UIDChange(void) -{ - printf_P(PSTR(ESC_FG_YELLOW "UID Change to %S mode\r\n" ESC_FG_WHITE), - (USB_CurrentMode == USB_MODE_Device) ? PSTR("Device") : PSTR("Host")); - - LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); -} - diff --git a/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.h b/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.h deleted file mode 100644 index 4b6fe4f6de..0000000000 --- a/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for MouseHost.c. - */ - -#ifndef _MOUSE_HOST_DEVICE_H_ -#define _MOUSE_HOST_DEVICE_H_ - - /* Includes: */ - #include - #include - #include - #include - #include - #include - - #include - #include - #include - #include - #include - #include - #include - - #include "Descriptors.h" - #include "DeviceFunctions.h" - #include "HostFunctions.h" - - /* Macros: */ - /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ - #define LEDMASK_USB_NOTREADY LEDS_LED1 - - /** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */ - #define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3) - - /** LED mask for the library LED driver, to indicate that the USB interface is ready. */ - #define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4) - - /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ - #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - - /* Function Prototypes: */ - void SetupHardware(void); - - void EVENT_USB_UIDChange(void); - -#endif - diff --git a/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.txt b/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.txt deleted file mode 100644 index d3fb9a5618..0000000000 --- a/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.txt +++ /dev/null @@ -1,80 +0,0 @@ -/** \file - * - * This file contains special DoxyGen information for the generation of the main page and other special - * documentation pages. It is not a project source file. - */ - -/** \mainpage Mouse Host/Device Dual Role Demo - * - * \section Sec_Compat Demo Compatibility: - * - * The following list indicates what microcontrollers are compatible with this demo. - * - * \li Series 7 USB AVRs (AT90USBxxx7) - * - * \section Sec_Info USB Information: - * - * The following table gives a rundown of the USB utilization of this demo. - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - *
USB Mode:Dual Mode Host/Device
USB Class:Human Interface Device (HID)
USB Subclass:N/A
Relevant Standards:USBIF HID Specification, USBIF HID Usage Tables
Supported USB Speeds:Low Speed Mode, Full Speed Mode
- * - * \section Sec_Description Project Description: - * - * Mouse host/device dual role demonstration application. This gives a simple - * reference application for implementing a dual role USB Mouse, for USB mice - * using the standard mouse boot protocol HID profile. - * - * When in host mode: - * Mouse movement and button presses are displayed on the board LEDs, - * as well as printed out the serial terminal as formatted dY, dY and - * button status information. - * - * This uses a naive method where the mouse is set to Boot Protocol mode, so - * that the report structure is fixed and known. A better implementation - * uses the HID report parser for correct report data processing across - * all compatible mice with advanced characteristics, as shown in the - * MouseHostWithParser Host demo application. - * - * Currently only single interface mice are supported. - * - * When in device mode: - * Upon enumeration the system will automatically enumerate and function - * as a mouse when the USB connection to a host is present. To use - * the mouse, move the joystick to move the pointer, and push the - * joystick inwards to simulate a left-button click. The HWB serves as - * the right mouse button. - * - * \section Sec_Options Project Options - * - * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. - * - * - * - * - * - *
- * None - *
- */ - diff --git a/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/asf.xml b/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/asf.xml deleted file mode 100644 index df36eb9af1..0000000000 --- a/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/asf.xml +++ /dev/null @@ -1,56 +0,0 @@ - - - - - - - - - - - - - - - - Mouse host and device dual role demo, implementing a basic mouse device and host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/doxyfile b/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/doxyfile deleted file mode 100644 index 0bfe97d548..0000000000 --- a/lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/doxyfile +++ /dev/null @@ -1,2395 +0,0 @@ -# Doxyfile 1.8.9 - -# This file describes the settings to be used by the documentation system -# doxygen (www.doxygen.org) for a project. -# -# All text after a double hash (##) is considered a comment and is placed in -# front of the TAG it is preceding. -# -# All text after a single hash (#) is considered a comment and will be ignored. -# The format is: -# TAG = value [value, ...] -# For lists, items can also be appended using: -# TAG += value [value, ...] -# Values that contain spaces should be placed between quotes (\" \"). - -#--------------------------------------------------------------------------- -# Project related configuration options -#--------------------------------------------------------------------------- - -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. -# The default value is: UTF-8. - -DOXYFILE_ENCODING = UTF-8 - -# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by -# double-quotes, unless you are using Doxywizard) that should identify the -# project for which the documentation is generated. This name is used in the -# title of most generated pages and in a few other places. -# The default value is: My Project. - -PROJECT_NAME = "LUFA Library - Mouse Host/Device Dual Role Demo" - -# The PROJECT_NUMBER tag can be used to enter a project or revision number. This -# could be handy for archiving the generated documentation or if some version -# control system is used. - -PROJECT_NUMBER = - -# Using the PROJECT_BRIEF tag one can provide an optional one line description -# for a project that appears at the top of each page and should give viewer a -# quick idea about the purpose of the project. Keep the description short. - -PROJECT_BRIEF = - -# With the PROJECT_LOGO tag one can specify a logo or an icon that is included -# in the documentation. The maximum height of the logo should not exceed 55 -# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy -# the logo to the output directory. - -PROJECT_LOGO = - -# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path -# into which the generated documentation will be written. If a relative path is -# entered, it will be relative to the location where doxygen was started. If -# left blank the current directory will be used. - -OUTPUT_DIRECTORY = ./Documentation/ - -# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- -# directories (in 2 levels) under the output directory of each output format and -# will distribute the generated files over these directories. Enabling this -# option can be useful when feeding doxygen a huge amount of source files, where -# putting all generated files in the same directory would otherwise causes -# performance problems for the file system. -# The default value is: NO. - -CREATE_SUBDIRS = NO - -# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII -# characters to appear in the names of generated files. If set to NO, non-ASCII -# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode -# U+3044. -# The default value is: NO. - -ALLOW_UNICODE_NAMES = NO - -# The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, -# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), -# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, -# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), -# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, -# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, -# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, -# Ukrainian and Vietnamese. -# The default value is: English. - -OUTPUT_LANGUAGE = English - -# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member -# descriptions after the members that are listed in the file and class -# documentation (similar to Javadoc). Set to NO to disable this. -# The default value is: YES. - -BRIEF_MEMBER_DESC = YES - -# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief -# description of a member or function before the detailed description -# -# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the -# brief descriptions will be completely suppressed. -# The default value is: YES. - -REPEAT_BRIEF = YES - -# This tag implements a quasi-intelligent brief description abbreviator that is -# used to form the text in various listings. Each string in this list, if found -# as the leading text of the brief description, will be stripped from the text -# and the result, after processing the whole list, is used as the annotated -# text. Otherwise, the brief description is used as-is. If left blank, the -# following values are used ($name is automatically replaced with the name of -# the entity):The $name class, The $name widget, The $name file, is, provides, -# specifies, contains, represents, a, an and the. - -ABBREVIATE_BRIEF = "The $name class" \ - "The $name widget" \ - "The $name file" \ - is \ - provides \ - specifies \ - contains \ - represents \ - a \ - an \ - the - -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# doxygen will generate a detailed section even if there is only a brief -# description. -# The default value is: NO. - -ALWAYS_DETAILED_SEC = NO - -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all -# inherited members of a class in the documentation of that class as if those -# members were ordinary class members. Constructors, destructors and assignment -# operators of the base classes will not be shown. -# The default value is: NO. - -INLINE_INHERITED_MEMB = NO - -# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path -# before files name in the file list and in the header files. If set to NO the -# shortest path that makes the file name unique will be used -# The default value is: YES. - -FULL_PATH_NAMES = YES - -# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. -# Stripping is only done if one of the specified strings matches the left-hand -# part of the path. The tag can be used to show relative paths in the file list. -# If left blank the directory from which doxygen is run is used as the path to -# strip. -# -# Note that you can specify absolute paths here, but also relative paths, which -# will be relative from the directory where doxygen is started. -# This tag requires that the tag FULL_PATH_NAMES is set to YES. - -STRIP_FROM_PATH = - -# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the -# path mentioned in the documentation of a class, which tells the reader which -# header file to include in order to use a class. If left blank only the name of -# the header file containing the class definition is used. Otherwise one should -# specify the list of include paths that are normally passed to the compiler -# using the -I flag. - -STRIP_FROM_INC_PATH = - -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but -# less readable) file names. This can be useful is your file systems doesn't -# support long names like on DOS, Mac, or CD-ROM. -# The default value is: NO. - -SHORT_NAMES = YES - -# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the -# first line (until the first dot) of a Javadoc-style comment as the brief -# description. If set to NO, the Javadoc-style will behave just like regular Qt- -# style comments (thus requiring an explicit @brief command for a brief -# description.) -# The default value is: NO. - -JAVADOC_AUTOBRIEF = NO - -# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first -# line (until the first dot) of a Qt-style comment as the brief description. If -# set to NO, the Qt-style will behave just like regular Qt-style comments (thus -# requiring an explicit \brief command for a brief description.) -# The default value is: NO. - -QT_AUTOBRIEF = NO - -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a -# multi-line C++ special comment block (i.e. a block of //! or /// comments) as -# a brief description. This used to be the default behavior. The new default is -# to treat a multi-line C++ comment block as a detailed description. Set this -# tag to YES if you prefer the old behavior instead. -# -# Note that setting this tag to YES also means that rational rose comments are -# not recognized any more. -# The default value is: NO. - -MULTILINE_CPP_IS_BRIEF = NO - -# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the -# documentation from any documented member that it re-implements. -# The default value is: YES. - -INHERIT_DOCS = YES - -# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new -# page for each member. If set to NO, the documentation of a member will be part -# of the file/class/namespace that contains it. -# The default value is: NO. - -SEPARATE_MEMBER_PAGES = NO - -# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen -# uses this value to replace tabs by spaces in code fragments. -# Minimum value: 1, maximum value: 16, default value: 4. - -TAB_SIZE = 4 - -# This tag can be used to specify a number of aliases that act as commands in -# the documentation. An alias has the form: -# name=value -# For example adding -# "sideeffect=@par Side Effects:\n" -# will allow you to put the command \sideeffect (or @sideeffect) in the -# documentation, which will result in a user-defined paragraph with heading -# "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. - -ALIASES = - -# This tag can be used to specify a number of word-keyword mappings (TCL only). -# A mapping has the form "name=value". For example adding "class=itcl::class" -# will allow you to use the command class in the itcl::class meaning. - -TCL_SUBST = - -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources -# only. Doxygen will then generate output that is more tailored for C. For -# instance, some of the names that are used will be different. The list of all -# members will be omitted, etc. -# The default value is: NO. - -OPTIMIZE_OUTPUT_FOR_C = YES - -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or -# Python sources only. Doxygen will then generate output that is more tailored -# for that language. For instance, namespaces will be presented as packages, -# qualified scopes will look different, etc. -# The default value is: NO. - -OPTIMIZE_OUTPUT_JAVA = NO - -# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran -# sources. Doxygen will then generate output that is tailored for Fortran. -# The default value is: NO. - -OPTIMIZE_FOR_FORTRAN = NO - -# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL -# sources. Doxygen will then generate output that is tailored for VHDL. -# The default value is: NO. - -OPTIMIZE_OUTPUT_VHDL = NO - -# Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given -# extension. Doxygen has a built-in mapping, but you can override or extend it -# using this tag. The format is ext=language, where ext is a file extension, and -# language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. -# -# Note: For files without extension you can use no_extension as a placeholder. -# -# Note that for custom extensions you also need to set FILE_PATTERNS otherwise -# the files are not read by doxygen. - -EXTENSION_MAPPING = - -# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments -# according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. -# The output of markdown processing is further processed by doxygen, so you can -# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in -# case of backward compatibilities issues. -# The default value is: YES. - -MARKDOWN_SUPPORT = NO - -# When enabled doxygen tries to link words that correspond to documented -# classes, or namespaces to their corresponding documentation. Such a link can -# be prevented in individual cases by putting a % sign in front of the word or -# globally by setting AUTOLINK_SUPPORT to NO. -# The default value is: YES. - -AUTOLINK_SUPPORT = YES - -# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want -# to include (a tag file for) the STL sources as input, then you should set this -# tag to YES in order to let doxygen match functions declarations and -# definitions whose arguments contain STL classes (e.g. func(std::string); -# versus func(std::string) {}). This also make the inheritance and collaboration -# diagrams that involve STL classes more complete and accurate. -# The default value is: NO. - -BUILTIN_STL_SUPPORT = NO - -# If you use Microsoft's C++/CLI language, you should set this option to YES to -# enable parsing support. -# The default value is: NO. - -CPP_CLI_SUPPORT = NO - -# Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen -# will parse them like normal C++ but will assume all classes use public instead -# of private inheritance when no explicit protection keyword is present. -# The default value is: NO. - -SIP_SUPPORT = NO - -# For Microsoft's IDL there are propget and propput attributes to indicate -# getter and setter methods for a property. Setting this option to YES will make -# doxygen to replace the get and set methods by a property in the documentation. -# This will only work if the methods are indeed getting or setting a simple -# type. If this is not the case, or you want to show the methods anyway, you -# should set this option to NO. -# The default value is: YES. - -IDL_PROPERTY_SUPPORT = YES - -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default -# all members of a group must be documented explicitly. -# The default value is: NO. - -DISTRIBUTE_GROUP_DOC = NO - -# Set the SUBGROUPING tag to YES to allow class member gro