From 5922751b173740e4375b2dfd1a48ff9762c9d943 Mon Sep 17 00:00:00 2001 From: Manna Harbour <51143715+manna-harbour@users.noreply.github.com> Date: Mon, 19 Dec 2022 20:52:03 +1100 Subject: [Keyboard] Add converter/xmk (#18433) --- keyboards/converter/xmk/config.h | 10 ++++ keyboards/converter/xmk/info.json | 65 ++++++++++++++++++++++++ keyboards/converter/xmk/keymaps/default/keymap.c | 15 ++++++ keyboards/converter/xmk/post_rules.mk | 9 ++++ keyboards/converter/xmk/readme.md | 30 +++++++++++ keyboards/converter/xmk/rules.mk | 10 ++++ keyboards/converter/xmk/xmk.c | 14 +++++ keyboards/converter/xmk/xmk_matrix.c | 35 +++++++++++++ keyboards/converter/xmk/xmk_matrix.h | 10 ++++ keyboards/converter/xmk/xmk_shell.c | 59 +++++++++++++++++++++ 10 files changed, 257 insertions(+) create mode 100644 keyboards/converter/xmk/config.h create mode 100644 keyboards/converter/xmk/info.json create mode 100644 keyboards/converter/xmk/keymaps/default/keymap.c create mode 100644 keyboards/converter/xmk/post_rules.mk create mode 100644 keyboards/converter/xmk/readme.md create mode 100644 keyboards/converter/xmk/rules.mk create mode 100644 keyboards/converter/xmk/xmk.c create mode 100644 keyboards/converter/xmk/xmk_matrix.c create mode 100644 keyboards/converter/xmk/xmk_matrix.h create mode 100644 keyboards/converter/xmk/xmk_shell.c (limited to 'keyboards') diff --git a/keyboards/converter/xmk/config.h b/keyboards/converter/xmk/config.h new file mode 100644 index 0000000000..a95fbd8257 --- /dev/null +++ b/keyboards/converter/xmk/config.h @@ -0,0 +1,10 @@ +// Copyright 2022 Manna Harbour (@manna-harbour) +// https://github.com/manna-harbour/xmk + +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#if defined (XMK_DEBUG) + #define DEBUG_MATRIX_SCAN_RATE +#endif diff --git a/keyboards/converter/xmk/info.json b/keyboards/converter/xmk/info.json new file mode 100644 index 0000000000..670010f1e2 --- /dev/null +++ b/keyboards/converter/xmk/info.json @@ -0,0 +1,65 @@ +{ + "keyboard_name": "xmk", + "manufacturer": "Manna Harbour", + "maintainer": "manna-harbour", + "url": "https://github.com/manna-harbour/xmk", + "bootloader": "caterina", + "features": { + "virtser": true + }, + "matrix_pins": { + "cols": ["C2", "C2", "C2", "C2", "C2", "C2", "C2", "C2", "C2", "C2", "C2", "C2", "C2", "C2", "C2", "C2", "C2", "C2", "C2", "C2", "C2", "C2", "C2", "C2", "C2", "C2", "C2", "C2", "C2", "C2", "C2", "C2"], + "rows": ["D1", "D1", "D1", "D1"] + }, + "processor": "atmega32u4", + "usb": { + "device_version": "1.0.0", + "pid": "0xD465", + "vid": "0xFEED" + }, + "community_layouts": [ + "split_3x5_3" + ], + "layouts": { + "LAYOUT_split_3x5_3": { + "layout": [ + { "matrix": [0, 0], "x": 0, "y": 0.25 }, + { "matrix": [0, 1], "x": 1, "y": 0.125 }, + { "matrix": [0, 2], "x": 2, "y": 0 }, + { "matrix": [0, 3], "x": 3, "y": 0.125 }, + { "matrix": [0, 4], "x": 4, "y": 0.25 }, + { "matrix": [0, 5], "x": 7, "y": 0.25 }, + { "matrix": [0, 6], "x": 8, "y": 0.125 }, + { "matrix": [0, 7], "x": 9, "y": 0 }, + { "matrix": [0, 8], "x": 10, "y": 0.125 }, + { "matrix": [0, 9], "x": 11, "y": 0.25 }, + { "matrix": [0, 10], "x": 0, "y": 1.25 }, + { "matrix": [0, 11], "x": 1, "y": 1.125 }, + { "matrix": [0, 12], "x": 2, "y": 1 }, + { "matrix": [0, 13], "x": 3, "y": 1.125 }, + { "matrix": [0, 14], "x": 4, "y": 1.25 }, + { "matrix": [0, 15], "x": 7, "y": 1.25 }, + { "matrix": [0, 16], "x": 8, "y": 1.125 }, + { "matrix": [0, 17], "x": 9, "y": 1 }, + { "matrix": [0, 18], "x": 10, "y": 1.125 }, + { "matrix": [0, 19], "x": 11, "y": 1.25 }, + { "matrix": [0, 20], "x": 0, "y": 2.25 }, + { "matrix": [0, 21], "x": 1, "y": 2.125 }, + { "matrix": [0, 22], "x": 2, "y": 2 }, + { "matrix": [0, 23], "x": 3, "y": 2.125 }, + { "matrix": [0, 24], "x": 4, "y": 2.25 }, + { "matrix": [0, 25], "x": 7, "y": 2.25 }, + { "matrix": [0, 26], "x": 8, "y": 2.125 }, + { "matrix": [0, 27], "x": 9, "y": 2 }, + { "matrix": [0, 28], "x": 10, "y": 2.125 }, + { "matrix": [0, 29], "x": 11, "y": 2.25 }, + { "matrix": [0, 30], "x": 2.5, "y": 3.25 }, + { "matrix": [0, 31], "x": 3.5, "y": 3.5 }, + { "matrix": [1, 0], "x": 4.5, "y": 3.75 }, + { "matrix": [1, 1], "x": 6.5, "y": 3.75 }, + { "matrix": [1, 2], "x": 7.5, "y": 3.5 }, + { "matrix": [1, 3], "x": 8.5, "y": 3.25 } + ] + } + } +} diff --git a/keyboards/converter/xmk/keymaps/default/keymap.c b/keyboards/converter/xmk/keymaps/default/keymap.c new file mode 100644 index 0000000000..6871209ab2 --- /dev/null +++ b/keyboards/converter/xmk/keymaps/default/keymap.c @@ -0,0 +1,15 @@ +// Copyright 2022 Manna Harbour (@manna-harbour) +// https://github.com/manna-harbour/xmk + +// SPDX-License-Identifier: GPL-2.0-or-later + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_split_3x5_3( + KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_QUOT, + KC_A, KC_R, KC_S, KC_T, KC_G, KC_M, KC_N, KC_E, KC_I, KC_O, + KC_Z, KC_X, KC_C, KC_D, KC_V, KC_K, KC_H, KC_COMM, KC_DOT, KC_SLSH, + KC_ESC, KC_SPC, KC_TAB, KC_ENT, KC_BSPC, KC_DEL + ) +}; diff --git a/keyboards/converter/xmk/post_rules.mk b/keyboards/converter/xmk/post_rules.mk new file mode 100644 index 0000000000..6986788540 --- /dev/null +++ b/keyboards/converter/xmk/post_rules.mk @@ -0,0 +1,9 @@ +# Copyright 2022 Manna Harbour (@manna-harbour) +# https://github.com/manna-harbour/xmk + +# SPDX-License-Identifier: GPL-2.0-or-later + +ifeq ($(strip $(XMK_DEBUG)), yes) + CONSOLE_ENABLE = yes + OPT_DEFS += -DXMK_DEBUG +endif diff --git a/keyboards/converter/xmk/readme.md b/keyboards/converter/xmk/readme.md new file mode 100644 index 0000000000..54347a4351 --- /dev/null +++ b/keyboards/converter/xmk/readme.md @@ -0,0 +1,30 @@ +# converter/xmk + +`converter/xmk` is the QMK keyboard definition for [𝑥MK](https://github.com/manna-harbour/xmk). + +* Keyboard Maintainer: [Manna Harbour](https://github.com/manna-harbour) +* Hardware Supported: Any QMK-compatible MCU board +* Hardware Availability: No additional hardware required + +Make example for this keyboard (after setting up your build environment): + + make converter/xmk:default + +Flashing example for this keyboard: + + make converter/xmk:default:flash + +To flash pre-compiled firmware to a pro-micro on Linux without using the `qmk` CLI: + + avrdude -p atmega32u4 -c avr109 -U flash:w:converter_xmk_default.hex:i -P /dev/ttyACM0 + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 4 ways: + +* **Boot shell command**: Give the `boot` command to the `converter/xmk` shell, e.g. `echo "boot" > /dev/ttyACM0` +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard diff --git a/keyboards/converter/xmk/rules.mk b/keyboards/converter/xmk/rules.mk new file mode 100644 index 0000000000..8237be5d26 --- /dev/null +++ b/keyboards/converter/xmk/rules.mk @@ -0,0 +1,10 @@ +# Copyright 2022 Manna Harbour (@manna-harbour) +# https://github.com/manna-harbour/xmk + +# SPDX-License-Identifier: GPL-2.0-or-later + +SRC += xmk_matrix.c +SRC += xmk_shell.c +CUSTOM_MATRIX = lite + +#XMK_DEBUG = yes diff --git a/keyboards/converter/xmk/xmk.c b/keyboards/converter/xmk/xmk.c new file mode 100644 index 0000000000..a0426e95dc --- /dev/null +++ b/keyboards/converter/xmk/xmk.c @@ -0,0 +1,14 @@ +// Copyright 2022 Manna Harbour (@manna-harbour) +// https://github.com/manna-harbour/xmk + +// SPDX-License-Identifier: GPL-2.0-or-later + +#include QMK_KEYBOARD_H + +#if defined (XMK_DEBUG) +void keyboard_post_init_kb(void) { + debug_enable=true; + debug_matrix=true; + debug_keyboard=true; +} +#endif diff --git a/keyboards/converter/xmk/xmk_matrix.c b/keyboards/converter/xmk/xmk_matrix.c new file mode 100644 index 0000000000..7327ad5cfe --- /dev/null +++ b/keyboards/converter/xmk/xmk_matrix.c @@ -0,0 +1,35 @@ +// Copyright 2022 Manna Harbour (@manna-harbour) +// https://github.com/manna-harbour/xmk + +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "xmk_matrix.h" + +bool xmk_changed = false; +matrix_row_t xmk_rows[MATRIX_ROWS]; + +bool matrix_scan_custom(matrix_row_t current_matrix[]) { + if (xmk_changed) { + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + current_matrix[row] = xmk_rows[row]; + } + xmk_changed = false; + return true; + } else { + return false; + } +} + +void xmk_matrix_key(bool press, uint8_t key) { + dprintf("xmk_matrix_key: press: %s, key: %u\n", press?"true":"false", key); + uint8_t row = key / MATRIX_COLS; + if (row < MATRIX_ROWS) { + uint8_t col = key % MATRIX_COLS; + xmk_changed = true; + if (press) { + xmk_rows[row] |= (MATRIX_ROW_SHIFTER << col); + } else { + xmk_rows[row] &= ~(MATRIX_ROW_SHIFTER << col); + } + } +} diff --git a/keyboards/converter/xmk/xmk_matrix.h b/keyboards/converter/xmk/xmk_matrix.h new file mode 100644 index 0000000000..45514dea04 --- /dev/null +++ b/keyboards/converter/xmk/xmk_matrix.h @@ -0,0 +1,10 @@ +// Copyright 2022 Manna Harbour (@manna-harbour) +// https://github.com/manna-harbour/xmk + +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include QMK_KEYBOARD_H + +void xmk_matrix_key(bool press, uint8_t key); diff --git a/keyboards/converter/xmk/xmk_shell.c b/keyboards/converter/xmk/xmk_shell.c new file mode 100644 index 0000000000..d8f146316e --- /dev/null +++ b/keyboards/converter/xmk/xmk_shell.c @@ -0,0 +1,59 @@ +// Copyright 2022 Manna Harbour (@manna-harbour) +// https://github.com/manna-harbour/xmk + +// SPDX-License-Identifier: GPL-2.0-or-later + +#include QMK_KEYBOARD_H +#include +#include + +#include "xmk_matrix.h" + +#define XMK_SHELL_LINE_LEN 64 + +#define XMK_SHELL_KEY "key " +#define XMK_SHELL_KEY_PRESS "press " +#define XMK_SHELL_KEY_RELEASE "release " +#define XMK_SHELL_BOOT "boot" +#define XMK_SHELL_RESET "reset" + +void xmk_shell(char *line) { + dprintf("xmk_shell: line: '%s'\n", line); + if (strncmp(line, XMK_SHELL_KEY, strlen(XMK_SHELL_KEY)) == 0) { + dprintf("xmk_shell: XMK_SHELL_KEY\n"); + if (strncmp(line + strlen(XMK_SHELL_KEY), XMK_SHELL_KEY_PRESS, strlen(XMK_SHELL_KEY_PRESS)) == 0) { + uint8_t key = strtol(line + strlen(XMK_SHELL_KEY) + strlen(XMK_SHELL_KEY_PRESS), NULL, 10); + dprintf("xmk_shell: XMK_SHELL_KEY_PRESS: key: %u\n", key); + xmk_matrix_key(true, key); + } else if (strncmp(line + strlen(XMK_SHELL_KEY), XMK_SHELL_KEY_RELEASE, strlen(XMK_SHELL_KEY_RELEASE)) == 0) { + uint8_t key = strtol(line + strlen(XMK_SHELL_KEY) + strlen(XMK_SHELL_KEY_RELEASE), NULL, 10); + dprintf("xmk_shell: XMK_SHELL_KEY_RELEASE: key: %u\n", key); + xmk_matrix_key(false, key); + } + } else if (strcmp(line, XMK_SHELL_BOOT) == 0) { + dprintf("xmk_shell: XMK_SHELL_BOOT\n"); + reset_keyboard(); + } else if (strcmp(line, XMK_SHELL_RESET) == 0) { + dprintf("xmk_shell: XMK_SHELL_RESET\n"); + soft_reset_keyboard(); + } +} + +void virtser_recv(const uint8_t ch) { + static char line[XMK_SHELL_LINE_LEN]; + static uint8_t line_index = 0; + if (ch == '\r') { + dprintf("virtser_recv: i: %3u, ch: %3u '\\r' \n", line_index, ch); + line[line_index] = '\0'; + xmk_shell(line); + line_index = 0; + } else if (ch == '\n') { + dprintf("virtser_recv: i: %3u, ch: %3u '\\n' \n", line_index, ch); + } else { + dprintf("virtser_recv: i: %3u, ch: %3u '%c'\n", line_index, ch, ch); + if (line_index < (XMK_SHELL_LINE_LEN - 1)) { + line[line_index] = ch; + line_index++; + } + } +} -- cgit v1.2.3