From 01736a502e8f2900bde229a086a4ab03513f6781 Mon Sep 17 00:00:00 2001 From: climbalima Date: Fri, 18 Nov 2016 23:40:34 -0500 Subject: just saving --- keyboards/maxipad/Makefile | 2 +- keyboards/maxipad/config.h | 113 +++++----------------------- keyboards/maxipad/keymaps/default/Makefile | 21 ------ keyboards/maxipad/keymaps/default/config.h | 8 -- keyboards/maxipad/keymaps/default/keymap.c | 40 ++-------- keyboards/maxipad/keymaps/default/readme.md | 1 - keyboards/maxipad/maxipad.c | 29 +------ keyboards/maxipad/maxipad.h | 12 +-- keyboards/maxipad/readme.md | 31 ++------ keyboards/maxipad/rules.mk | 29 +++---- 10 files changed, 54 insertions(+), 232 deletions(-) delete mode 100644 keyboards/maxipad/keymaps/default/Makefile delete mode 100644 keyboards/maxipad/keymaps/default/config.h delete mode 100644 keyboards/maxipad/keymaps/default/readme.md (limited to 'keyboards') diff --git a/keyboards/maxipad/Makefile b/keyboards/maxipad/Makefile index 57b2ef62e5..4e2a6f00fd 100644 --- a/keyboards/maxipad/Makefile +++ b/keyboards/maxipad/Makefile @@ -1,3 +1,3 @@ ifndef MAKEFILE_INCLUDED include ../../Makefile -endif +endif \ No newline at end of file diff --git a/keyboards/maxipad/config.h b/keyboards/maxipad/config.h index fbe64a5b0b..a056e4963b 100644 --- a/keyboards/maxipad/config.h +++ b/keyboards/maxipad/config.h @@ -24,124 +24,49 @@ along with this program. If not, see . #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x6060 #define DEVICE_VER 0x0001 -#define MANUFACTURER Wootpatoot +#define MANUFACTURER wootpatoot #define PRODUCT maxipad #define DESCRIPTION A custom keyboard - /* key matrix size */ #define MATRIX_ROWS 5 #define MATRIX_COLS 6 -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { B6, F7, B2, B3, B1 } -#define MATRIX_COL_PINS { F6, C6, D7, F5, B4, B5 } -#define UNUSED_PINS +// Planck PCB default pin-out +// Change this to how you wired your keyboard +// COLS: Left to right, ROWS: Top to bottom +#ifdef USE_PRO_MICRO + #define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 } + #define MATRIX_COL_PINS { F4, C6, D7, F5, B4, B5 } + #define UNUSED_PINS + #else + #define MATRIX_ROW_PINS { B6, F7, B2, B3, B1 } + #define MATRIX_COL_PINS { F6, C6, D7, F5, B4, B5 } + #define UNUSED_PINS + #endif /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ +/* define if matrix has ghost */ //#define MATRIX_HAS_GHOST /* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ +/* key combination for command */ #define IS_COMMAND() ( \ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ ) -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/maxipad/keymaps/default/Makefile b/keyboards/maxipad/keymaps/default/Makefile deleted file mode 100644 index f4671a9d11..0000000000 --- a/keyboards/maxipad/keymaps/default/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif \ No newline at end of file diff --git a/keyboards/maxipad/keymaps/default/config.h b/keyboards/maxipad/keymaps/default/config.h deleted file mode 100644 index df06a26206..0000000000 --- a/keyboards/maxipad/keymaps/default/config.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here - -#endif \ No newline at end of file diff --git a/keyboards/maxipad/keymaps/default/keymap.c b/keyboards/maxipad/keymaps/default/keymap.c index 43ace32419..227cef7d86 100644 --- a/keyboards/maxipad/keymaps/default/keymap.c +++ b/keyboards/maxipad/keymaps/default/keymap.c @@ -1,5 +1,5 @@ #include "maxipad.h" - + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = KEYMAP( /* Base */ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, \ @@ -13,42 +13,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, \ KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, \ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC \ ), }; - + const uint16_t PROGMEM fn_actions[] = { - }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // MACRODOWN only works in this function { - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } return MACRO_NONE; -}; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} \ No newline at end of file +}; \ No newline at end of file diff --git a/keyboards/maxipad/keymaps/default/readme.md b/keyboards/maxipad/keymaps/default/readme.md deleted file mode 100644 index a6c0d4a3f0..0000000000 --- a/keyboards/maxipad/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for maxipad \ No newline at end of file diff --git a/keyboards/maxipad/maxipad.c b/keyboards/maxipad/maxipad.c index 879ae86a76..a193b112b9 100644 --- a/keyboards/maxipad/maxipad.c +++ b/keyboards/maxipad/maxipad.c @@ -1,28 +1 @@ -#include "maxipad.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} +#include "maxipad.h" \ No newline at end of file diff --git a/keyboards/maxipad/maxipad.h b/keyboards/maxipad/maxipad.h index eee1309ddc..4d8c6428d2 100644 --- a/keyboards/maxipad/maxipad.h +++ b/keyboards/maxipad/maxipad.h @@ -8,18 +8,18 @@ // The first section contains all of the arguements // The second converts the arguments into a two-dimensional array #define KEYMAP( \ - k00, k01, k02, k03, k04, k05, \ - k10, k11, k12, k13, k14, k15, \ - k20, k21, k22, k23, k24, k25, \ - k30, k31, k32, k33, k34, k35, \ - k40, k41, k42, k43, k44, k45 \ + k00, k01, k02, k03, k04, k05, \ + k10, k11, k12, k13, k14, k15, \ + k20, k21, k22, k23, k24, k25, \ + k30, k31, k32, k33, k34, k35, \ + k40, k41, k42, k43, k44, k45 \ ) \ { \ { k00, k01, k02, k03, k04, k05 }, \ { k10, k11, k12, k13, k14, k15 }, \ { k20, k21, k22, k23, k24, k25 }, \ { k30, k31, k32, k33, k34, k35 }, \ - { k40, k41, k42, k43, k44, k45} \ + { k40, k41, k42, k43, k44, k45 } \ } #endif diff --git a/keyboards/maxipad/readme.md b/keyboards/maxipad/readme.md index 1971ce1f36..4e1702c5ad 100644 --- a/keyboards/maxipad/readme.md +++ b/keyboards/maxipad/readme.md @@ -1,46 +1,27 @@ -maxipad keyboard firmware +Maxipad keyboard firmware ====================== ## Quantum MK Firmware -<<<<<<< HEAD -For the full Quantum feature list, see [the parent readme](/). -======= -For the full Quantum feature list, see [the parent readme.md](/doc/readme.md). ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df +For the full Quantum feature list, see [the parent readme.md](/readme.md). ## Building +If you are using a pro micro then make sure to enable USE_PRO_MICRO in the makefile + Download or clone the whole firmware and navigate to the keyboards/maxipad folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default - -<<<<<<< HEAD To build with the default keymap, simply run `make default`. -======= -To build with the default keymap, simply run `make`. ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df ### Other Keymaps +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` and see keymap document (you can find in top readme.md) and existent keymap files. -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. - -<<<<<<< HEAD To build the firmware binary hex file with a keymap just do `make` with a keymap like this: ``` $ make [default|jack|] ``` - -Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. -======= -To build the firmware binary hex file with a keymap just do `make` with `keymap` option like: - -``` -$ make keymap=[default|jack|] -``` - -Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df +Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. \ No newline at end of file diff --git a/keyboards/maxipad/rules.mk b/keyboards/maxipad/rules.mk index 55898147dd..e6e5923f16 100644 --- a/keyboards/maxipad/rules.mk +++ b/keyboards/maxipad/rules.mk @@ -1,3 +1,5 @@ + + # MCU name #MCU = at90usb1287 MCU = atmega32u4 @@ -49,19 +51,18 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512 # Build Options -# change yes to no to disable +# comment out to disable the options. # -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID +USE_PRO_MICRO ?= yes \ No newline at end of file -- cgit v1.2.3 From ae66f0d70214b8a5e81ecf5977619bcd4bf6f413 Mon Sep 17 00:00:00 2001 From: climbalima Date: Sat, 3 Dec 2016 17:09:11 -0500 Subject: added plate files for lets split --- keyboards/pilcrow/Makefile | 3 + keyboards/pilcrow/config.h | 162 + keyboards/pilcrow/keymaps/default/Makefile | 21 + keyboards/pilcrow/keymaps/default/config.h | 8 + keyboards/pilcrow/keymaps/default/keymap.c | 88 + keyboards/pilcrow/keymaps/default/readme.md | 1 + keyboards/pilcrow/pilcrow.c | 28 + keyboards/pilcrow/pilcrow.h | 23 + keyboards/pilcrow/readme.md | 28 + keyboards/pilcrow/rules.mk | 67 + keyboards/weebkeeb/Makefile | 3 + keyboards/weebkeeb/aek.dxf | 6486 ++++++++++++++++++++++++++ keyboards/weebkeeb/config.h | 162 + keyboards/weebkeeb/keymaps/default/Makefile | 21 + keyboards/weebkeeb/keymaps/default/config.h | 8 + keyboards/weebkeeb/keymaps/default/keymap.c | 119 + keyboards/weebkeeb/keymaps/default/readme.md | 1 + keyboards/weebkeeb/readme.md | 28 + keyboards/weebkeeb/rules.mk | 67 + keyboards/weebkeeb/weebkeeb.c | 28 + keyboards/weebkeeb/weebkeeb.h | 23 + 21 files changed, 7375 insertions(+) create mode 100644 keyboards/pilcrow/Makefile create mode 100644 keyboards/pilcrow/config.h create mode 100644 keyboards/pilcrow/keymaps/default/Makefile create mode 100644 keyboards/pilcrow/keymaps/default/config.h create mode 100644 keyboards/pilcrow/keymaps/default/keymap.c create mode 100644 keyboards/pilcrow/keymaps/default/readme.md create mode 100644 keyboards/pilcrow/pilcrow.c create mode 100644 keyboards/pilcrow/pilcrow.h create mode 100644 keyboards/pilcrow/readme.md create mode 100644 keyboards/pilcrow/rules.mk create mode 100644 keyboards/weebkeeb/Makefile create mode 100644 keyboards/weebkeeb/aek.dxf create mode 100644 keyboards/weebkeeb/config.h create mode 100644 keyboards/weebkeeb/keymaps/default/Makefile create mode 100644 keyboards/weebkeeb/keymaps/default/config.h create mode 100644 keyboards/weebkeeb/keymaps/default/keymap.c create mode 100644 keyboards/weebkeeb/keymaps/default/readme.md create mode 100644 keyboards/weebkeeb/readme.md create mode 100644 keyboards/weebkeeb/rules.mk create mode 100644 keyboards/weebkeeb/weebkeeb.c create mode 100644 keyboards/weebkeeb/weebkeeb.h (limited to 'keyboards') diff --git a/keyboards/pilcrow/Makefile b/keyboards/pilcrow/Makefile new file mode 100644 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/pilcrow/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif \ No newline at end of file diff --git a/keyboards/pilcrow/config.h b/keyboards/pilcrow/config.h new file mode 100644 index 0000000000..d79c1ba40c --- /dev/null +++ b/keyboards/pilcrow/config.h @@ -0,0 +1,162 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER You +#define PRODUCT pilcrow +#define DESCRIPTION A custom keyboard + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 10 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { B2, C6, D7, E6 } +#define MATRIX_COL_PINS { B6, D1, B4, B5, D4, D0, B3, B1, F7, F6 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/pilcrow/keymaps/default/Makefile b/keyboards/pilcrow/keymaps/default/Makefile new file mode 100644 index 0000000000..f4671a9d11 --- /dev/null +++ b/keyboards/pilcrow/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/pilcrow/keymaps/default/config.h b/keyboards/pilcrow/keymaps/default/config.h new file mode 100644 index 0000000000..df06a26206 --- /dev/null +++ b/keyboards/pilcrow/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif \ No newline at end of file diff --git a/keyboards/pilcrow/keymaps/default/keymap.c b/keyboards/pilcrow/keymaps/default/keymap.c new file mode 100644 index 0000000000..e382e4c6ad --- /dev/null +++ b/keyboards/pilcrow/keymaps/default/keymap.c @@ -0,0 +1,88 @@ +#include "pilcrow.h" +#define _______ KC_TRNS +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP( \ + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \ + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, \ + KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, \ + KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, MT(MOD_LSFT, KC_SPC), MO(2), MO(3), KC_DEL, KC_ESC \ +), + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[1] = KEYMAP( \ + KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, \ + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),KC_PIPE, S(KC_QUOT), \ + _______, _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_GRV \ +), +[2] = KEYMAP( \ + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, \ + KC_TAB, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT,KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, \ + OSM(MOD_LSFT), KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_BSLS, KC_QUOT, \ + _______, _______, _______, _______, KC_ENT, KC_ENT, _______, KC_MNXT, KC_VOLD, KC_VOLU \ +), + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[3] = KEYMAP( \ + RESET, KC_UP, _______, _______, _______, _______, _______, KC_MS_WH_DOWN, KC_MS_U, KC_MS_WH_UP, \ + KC_LEFT, KC_DOWN, KC_RIGHT, AU_ON, AU_OFF, AG_NORM, AG_SWAP, KC_MS_L,KC_MS_D, KC_MS_R, \ + RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, \ + _______, _______, _______, _______, KC_MS_BTN1, KC_MS_BTN2, _______, _______, _______, _______ \ +) +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + +} \ No newline at end of file diff --git a/keyboards/pilcrow/keymaps/default/readme.md b/keyboards/pilcrow/keymaps/default/readme.md new file mode 100644 index 0000000000..95472dfca8 --- /dev/null +++ b/keyboards/pilcrow/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for pilcrow \ No newline at end of file diff --git a/keyboards/pilcrow/pilcrow.c b/keyboards/pilcrow/pilcrow.c new file mode 100644 index 0000000000..c8243df7bf --- /dev/null +++ b/keyboards/pilcrow/pilcrow.c @@ -0,0 +1,28 @@ +#include "pilcrow.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/pilcrow/pilcrow.h b/keyboards/pilcrow/pilcrow.h new file mode 100644 index 0000000000..7138ccb3f6 --- /dev/null +++ b/keyboards/pilcrow/pilcrow.h @@ -0,0 +1,23 @@ +#ifndef PILCROW_H +#define PILCROW_H + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The following is an example using the Planck MIT layout +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19 }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39 } \ +} + +#endif diff --git a/keyboards/pilcrow/readme.md b/keyboards/pilcrow/readme.md new file mode 100644 index 0000000000..7a7f6d2af5 --- /dev/null +++ b/keyboards/pilcrow/readme.md @@ -0,0 +1,28 @@ +pilcrow keyboard firmware +====================== + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme](/). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/pilcrow folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make default`. + +### Other Keymaps + +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. + +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + +``` +$ make [default|jack|] +``` + +Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/pilcrow/rules.mk b/keyboards/pilcrow/rules.mk new file mode 100644 index 0000000000..55898147dd --- /dev/null +++ b/keyboards/pilcrow/rules.mk @@ -0,0 +1,67 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 diff --git a/keyboards/weebkeeb/Makefile b/keyboards/weebkeeb/Makefile new file mode 100644 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/weebkeeb/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif \ No newline at end of file diff --git a/keyboards/weebkeeb/aek.dxf b/keyboards/weebkeeb/aek.dxf new file mode 100644 index 0000000000..cfe80946bd --- /dev/null +++ b/keyboards/weebkeeb/aek.dxf @@ -0,0 +1,6486 @@ +0 +SECTION +2 +ENTITIES +0 +LINE +8 +0 +10 +104.7875 +20 +-89.2875 +11 +104.7875 +21 +-91.6875 +0 +LINE +8 +0 +10 +104.7875 +20 +-91.6875 +11 +102.3875 +21 +-91.6875 +0 +LINE +8 +0 +10 +102.3875 +20 +-91.6875 +11 +102.3875 +21 +-89.2875 +0 +LINE +8 +0 +10 +102.3875 +20 +-89.2875 +11 +104.7875 +21 +-89.2875 +0 +LINE +8 +0 +10 +116.8875 +20 +-89.2875 +11 +116.8875 +21 +-91.6875 +0 +LINE +8 +0 +10 +116.8875 +20 +-91.6875 +11 +114.4875 +21 +-91.6875 +0 +LINE +8 +0 +10 +114.4875 +20 +-91.6875 +11 +114.4875 +21 +-89.2875 +0 +LINE +8 +0 +10 +114.4875 +20 +-89.2875 +11 +116.8875 +21 +-89.2875 +0 +CIRCLE +8 +0 +10 +109.6375 +20 +-90.4875 +40 +3.15 +0 +LINE +8 +0 +10 +103.4875 +20 +-94.3875 +11 +103.4875 +21 +-99.4875 +0 +LINE +8 +0 +10 +103.4875 +20 +-99.4875 +11 +100.8875 +21 +-99.4875 +0 +LINE +8 +0 +10 +100.8875 +20 +-99.4875 +11 +100.8875 +21 +-94.3875 +0 +LINE +8 +0 +10 +100.8875 +20 +-94.3875 +11 +103.4875 +21 +-94.3875 +0 +LINE +8 +0 +10 +191.7875 +20 +-94.3875 +11 +191.7875 +21 +-99.4875 +0 +LINE +8 +0 +10 +191.7875 +20 +-99.4875 +11 +194.3875 +21 +-99.4875 +0 +LINE +8 +0 +10 +194.3875 +20 +-99.4875 +11 +194.3875 +21 +-94.3875 +0 +LINE +8 +0 +10 +194.3875 +20 +-94.3875 +11 +191.7875 +21 +-94.3875 +0 +LINE +8 +0 +10 +155.3875 +20 +-84.0875 +11 +139.8875 +21 +-84.0875 +0 +LINE +8 +0 +10 +139.8875 +20 +-84.0875 +11 +139.8875 +21 +-96.8875 +0 +LINE +8 +0 +10 +139.8875 +20 +-96.8875 +11 +155.3875 +21 +-96.8875 +0 +LINE +8 +0 +10 +155.3875 +20 +-96.8875 +11 +155.3875 +21 +-84.0875 +0 +LINE +8 +0 +10 +256.28125 +20 +-56.2875 +11 +256.28125 +21 +-61.3875 +0 +LINE +8 +0 +10 +256.28125 +20 +-61.3875 +11 +253.68125 +21 +-61.3875 +0 +LINE +8 +0 +10 +253.68125 +20 +-61.3875 +11 +253.68125 +21 +-56.2875 +0 +LINE +8 +0 +10 +253.68125 +20 +-56.2875 +11 +256.28125 +21 +-56.2875 +0 +LINE +8 +0 +10 +281.88125 +20 +-56.2875 +11 +281.88125 +21 +-61.3875 +0 +LINE +8 +0 +10 +281.88125 +20 +-61.3875 +11 +284.48125 +21 +-61.3875 +0 +LINE +8 +0 +10 +284.48125 +20 +-61.3875 +11 +284.48125 +21 +-56.2875 +0 +LINE +8 +0 +10 +284.48125 +20 +-56.2875 +11 +281.88125 +21 +-56.2875 +0 +LINE +8 +0 +10 +276.83125 +20 +-45.9875 +11 +261.33125 +21 +-45.9875 +0 +LINE +8 +0 +10 +261.33125 +20 +-45.9875 +11 +261.33125 +21 +-58.7875 +0 +LINE +8 +0 +10 +261.33125 +20 +-58.7875 +11 +276.83125 +21 +-58.7875 +0 +LINE +8 +0 +10 +276.83125 +20 +-58.7875 +11 +276.83125 +21 +-45.9875 +0 +LINE +8 +0 +10 +258.6625 +20 +-18.1875 +11 +258.6625 +21 +-23.2875 +0 +LINE +8 +0 +10 +258.6625 +20 +-23.2875 +11 +256.0625 +21 +-23.2875 +0 +LINE +8 +0 +10 +256.0625 +20 +-23.2875 +11 +256.0625 +21 +-18.1875 +0 +LINE +8 +0 +10 +256.0625 +20 +-18.1875 +11 +258.6625 +21 +-18.1875 +0 +LINE +8 +0 +10 +284.2625 +20 +-18.1875 +11 +284.2625 +21 +-23.2875 +0 +LINE +8 +0 +10 +284.2625 +20 +-23.2875 +11 +286.8625 +21 +-23.2875 +0 +LINE +8 +0 +10 +286.8625 +20 +-23.2875 +11 +286.8625 +21 +-18.1875 +0 +LINE +8 +0 +10 +286.8625 +20 +-18.1875 +11 +284.2625 +21 +-18.1875 +0 +LINE +8 +0 +10 +279.2125 +20 +-7.8875 +11 +263.7125 +21 +-7.8875 +0 +LINE +8 +0 +10 +263.7125 +20 +-7.8875 +11 +263.7125 +21 +-20.6875 +0 +LINE +8 +0 +10 +263.7125 +20 +-20.6875 +11 +279.2125 +21 +-20.6875 +0 +LINE +8 +0 +10 +279.2125 +20 +-20.6875 +11 +279.2125 +21 +-7.8875 +0 +LINE +8 +0 +10 +13.39375 +20 +-75.3375 +11 +13.39375 +21 +-80.4375 +0 +LINE +8 +0 +10 +13.39375 +20 +-80.4375 +11 +10.79375 +21 +-80.4375 +0 +LINE +8 +0 +10 +10.79375 +20 +-80.4375 +11 +10.79375 +21 +-75.3375 +0 +LINE +8 +0 +10 +10.79375 +20 +-75.3375 +11 +13.39375 +21 +-75.3375 +0 +LINE +8 +0 +10 +38.99375 +20 +-75.3375 +11 +38.99375 +21 +-80.4375 +0 +LINE +8 +0 +10 +38.99375 +20 +-80.4375 +11 +41.59375 +21 +-80.4375 +0 +LINE +8 +0 +10 +41.59375 +20 +-80.4375 +11 +41.59375 +21 +-75.3375 +0 +LINE +8 +0 +10 +41.59375 +20 +-75.3375 +11 +38.99375 +21 +-75.3375 +0 +LINE +8 +0 +10 +33.94375 +20 +-65.0375 +11 +18.44375 +21 +-65.0375 +0 +LINE +8 +0 +10 +18.44375 +20 +-65.0375 +11 +18.44375 +21 +-77.8375 +0 +LINE +8 +0 +10 +18.44375 +20 +-77.8375 +11 +33.94375 +21 +-77.8375 +0 +LINE +8 +0 +10 +33.94375 +20 +-77.8375 +11 +33.94375 +21 +-65.0375 +0 +LINE +8 +0 +10 +193.4875 +20 +-7.8875 +11 +177.9875 +21 +-7.8875 +0 +LINE +8 +0 +10 +177.9875 +20 +-7.8875 +11 +177.9875 +21 +-20.6875 +0 +LINE +8 +0 +10 +177.9875 +20 +-20.6875 +11 +193.4875 +21 +-20.6875 +0 +LINE +8 +0 +10 +193.4875 +20 +-20.6875 +11 +193.4875 +21 +-7.8875 +0 +LINE +8 +0 +10 +174.4375 +20 +-7.8875 +11 +158.9375 +21 +-7.8875 +0 +LINE +8 +0 +10 +158.9375 +20 +-7.8875 +11 +158.9375 +21 +-20.6875 +0 +LINE +8 +0 +10 +158.9375 +20 +-20.6875 +11 +174.4375 +21 +-20.6875 +0 +LINE +8 +0 +10 +174.4375 +20 +-20.6875 +11 +174.4375 +21 +-7.8875 +0 +LINE +8 +0 +10 +183.9625 +20 +-26.9375 +11 +168.4625 +21 +-26.9375 +0 +LINE +8 +0 +10 +168.4625 +20 +-26.9375 +11 +168.4625 +21 +-39.7375 +0 +LINE +8 +0 +10 +168.4625 +20 +-39.7375 +11 +183.9625 +21 +-39.7375 +0 +LINE +8 +0 +10 +183.9625 +20 +-39.7375 +11 +183.9625 +21 +-26.9375 +0 +LINE +8 +0 +10 +169.675 +20 +-45.9875 +11 +154.175 +21 +-45.9875 +0 +LINE +8 +0 +10 +154.175 +20 +-45.9875 +11 +154.175 +21 +-58.7875 +0 +LINE +8 +0 +10 +154.175 +20 +-58.7875 +11 +169.675 +21 +-58.7875 +0 +LINE +8 +0 +10 +169.675 +20 +-58.7875 +11 +169.675 +21 +-45.9875 +0 +LINE +8 +0 +10 +150.625 +20 +-45.9875 +11 +135.125 +21 +-45.9875 +0 +LINE +8 +0 +10 +135.125 +20 +-45.9875 +11 +135.125 +21 +-58.7875 +0 +LINE +8 +0 +10 +135.125 +20 +-58.7875 +11 +150.625 +21 +-58.7875 +0 +LINE +8 +0 +10 +150.625 +20 +-58.7875 +11 +150.625 +21 +-45.9875 +0 +LINE +8 +0 +10 +160.15 +20 +-65.0375 +11 +144.65 +21 +-65.0375 +0 +LINE +8 +0 +10 +144.65 +20 +-65.0375 +11 +144.65 +21 +-77.8375 +0 +LINE +8 +0 +10 +144.65 +20 +-77.8375 +11 +160.15 +21 +-77.8375 +0 +LINE +8 +0 +10 +160.15 +20 +-77.8375 +11 +160.15 +21 +-65.0375 +0 +LINE +8 +0 +10 +141.1 +20 +-65.0375 +11 +125.6 +21 +-65.0375 +0 +LINE +8 +0 +10 +125.6 +20 +-65.0375 +11 +125.6 +21 +-77.8375 +0 +LINE +8 +0 +10 +125.6 +20 +-77.8375 +11 +141.1 +21 +-77.8375 +0 +LINE +8 +0 +10 +141.1 +20 +-77.8375 +11 +141.1 +21 +-65.0375 +0 +LINE +8 +0 +10 +155.3875 +20 +-7.8875 +11 +139.8875 +21 +-7.8875 +0 +LINE +8 +0 +10 +139.8875 +20 +-7.8875 +11 +139.8875 +21 +-20.6875 +0 +LINE +8 +0 +10 +139.8875 +20 +-20.6875 +11 +155.3875 +21 +-20.6875 +0 +LINE +8 +0 +10 +155.3875 +20 +-20.6875 +11 +155.3875 +21 +-7.8875 +0 +LINE +8 +0 +10 +136.3375 +20 +-7.8875 +11 +120.8375 +21 +-7.8875 +0 +LINE +8 +0 +10 +120.8375 +20 +-7.8875 +11 +120.8375 +21 +-20.6875 +0 +LINE +8 +0 +10 +120.8375 +20 +-20.6875 +11 +136.3375 +21 +-20.6875 +0 +LINE +8 +0 +10 +136.3375 +20 +-20.6875 +11 +136.3375 +21 +-7.8875 +0 +LINE +8 +0 +10 +164.9125 +20 +-26.9375 +11 +149.4125 +21 +-26.9375 +0 +LINE +8 +0 +10 +149.4125 +20 +-26.9375 +11 +149.4125 +21 +-39.7375 +0 +LINE +8 +0 +10 +149.4125 +20 +-39.7375 +11 +164.9125 +21 +-39.7375 +0 +LINE +8 +0 +10 +164.9125 +20 +-39.7375 +11 +164.9125 +21 +-26.9375 +0 +LINE +8 +0 +10 +145.8625 +20 +-26.9375 +11 +130.3625 +21 +-26.9375 +0 +LINE +8 +0 +10 +130.3625 +20 +-26.9375 +11 +130.3625 +21 +-39.7375 +0 +LINE +8 +0 +10 +130.3625 +20 +-39.7375 +11 +145.8625 +21 +-39.7375 +0 +LINE +8 +0 +10 +145.8625 +20 +-39.7375 +11 +145.8625 +21 +-26.9375 +0 +LINE +8 +0 +10 +131.575 +20 +-45.9875 +11 +116.075 +21 +-45.9875 +0 +LINE +8 +0 +10 +116.075 +20 +-45.9875 +11 +116.075 +21 +-58.7875 +0 +LINE +8 +0 +10 +116.075 +20 +-58.7875 +11 +131.575 +21 +-58.7875 +0 +LINE +8 +0 +10 +131.575 +20 +-58.7875 +11 +131.575 +21 +-45.9875 +0 +LINE +8 +0 +10 +122.05 +20 +-65.0375 +11 +106.55 +21 +-65.0375 +0 +LINE +8 +0 +10 +106.55 +20 +-65.0375 +11 +106.55 +21 +-77.8375 +0 +LINE +8 +0 +10 +106.55 +20 +-77.8375 +11 +122.05 +21 +-77.8375 +0 +LINE +8 +0 +10 +122.05 +20 +-77.8375 +11 +122.05 +21 +-65.0375 +0 +LINE +8 +0 +10 +103.0 +20 +-65.0375 +11 +87.5 +21 +-65.0375 +0 +LINE +8 +0 +10 +87.5 +20 +-65.0375 +11 +87.5 +21 +-77.8375 +0 +LINE +8 +0 +10 +87.5 +20 +-77.8375 +11 +103.0 +21 +-77.8375 +0 +LINE +8 +0 +10 +103.0 +20 +-77.8375 +11 +103.0 +21 +-65.0375 +0 +LINE +8 +0 +10 +117.2875 +20 +-7.8875 +11 +101.7875 +21 +-7.8875 +0 +LINE +8 +0 +10 +101.7875 +20 +-7.8875 +11 +101.7875 +21 +-20.6875 +0 +LINE +8 +0 +10 +101.7875 +20 +-20.6875 +11 +117.2875 +21 +-20.6875 +0 +LINE +8 +0 +10 +117.2875 +20 +-20.6875 +11 +117.2875 +21 +-7.8875 +0 +LINE +8 +0 +10 +98.2375 +20 +-7.8875 +11 +82.7375 +21 +-7.8875 +0 +LINE +8 +0 +10 +82.7375 +20 +-7.8875 +11 +82.7375 +21 +-20.6875 +0 +LINE +8 +0 +10 +82.7375 +20 +-20.6875 +11 +98.2375 +21 +-20.6875 +0 +LINE +8 +0 +10 +98.2375 +20 +-20.6875 +11 +98.2375 +21 +-7.8875 +0 +LINE +8 +0 +10 +126.8125 +20 +-26.9375 +11 +111.3125 +21 +-26.9375 +0 +LINE +8 +0 +10 +111.3125 +20 +-26.9375 +11 +111.3125 +21 +-39.7375 +0 +LINE +8 +0 +10 +111.3125 +20 +-39.7375 +11 +126.8125 +21 +-39.7375 +0 +LINE +8 +0 +10 +126.8125 +20 +-39.7375 +11 +126.8125 +21 +-26.9375 +0 +LINE +8 +0 +10 +107.7625 +20 +-26.9375 +11 +92.2625 +21 +-26.9375 +0 +LINE +8 +0 +10 +92.2625 +20 +-26.9375 +11 +92.2625 +21 +-39.7375 +0 +LINE +8 +0 +10 +92.2625 +20 +-39.7375 +11 +107.7625 +21 +-39.7375 +0 +LINE +8 +0 +10 +107.7625 +20 +-39.7375 +11 +107.7625 +21 +-26.9375 +0 +LINE +8 +0 +10 +112.525 +20 +-45.9875 +11 +97.025 +21 +-45.9875 +0 +LINE +8 +0 +10 +97.025 +20 +-45.9875 +11 +97.025 +21 +-58.7875 +0 +LINE +8 +0 +10 +97.025 +20 +-58.7875 +11 +112.525 +21 +-58.7875 +0 +LINE +8 +0 +10 +112.525 +20 +-58.7875 +11 +112.525 +21 +-45.9875 +0 +LINE +8 +0 +10 +93.475 +20 +-45.9875 +11 +77.975 +21 +-45.9875 +0 +LINE +8 +0 +10 +77.975 +20 +-45.9875 +11 +77.975 +21 +-58.7875 +0 +LINE +8 +0 +10 +77.975 +20 +-58.7875 +11 +93.475 +21 +-58.7875 +0 +LINE +8 +0 +10 +93.475 +20 +-58.7875 +11 +93.475 +21 +-45.9875 +0 +LINE +8 +0 +10 +83.95 +20 +-65.0375 +11 +68.45 +21 +-65.0375 +0 +LINE +8 +0 +10 +68.45 +20 +-65.0375 +11 +68.45 +21 +-77.8375 +0 +LINE +8 +0 +10 +68.45 +20 +-77.8375 +11 +83.95 +21 +-77.8375 +0 +LINE +8 +0 +10 +83.95 +20 +-77.8375 +11 +83.95 +21 +-65.0375 +0 +LINE +8 +0 +10 +79.1875 +20 +-84.0875 +11 +63.6875 +21 +-84.0875 +0 +LINE +8 +0 +10 +63.6875 +20 +-84.0875 +11 +63.6875 +21 +-96.8875 +0 +LINE +8 +0 +10 +63.6875 +20 +-96.8875 +11 +79.1875 +21 +-96.8875 +0 +LINE +8 +0 +10 +79.1875 +20 +-96.8875 +11 +79.1875 +21 +-84.0875 +0 +LINE +8 +0 +10 +79.1875 +20 +-7.8875 +11 +63.6875 +21 +-7.8875 +0 +LINE +8 +0 +10 +63.6875 +20 +-7.8875 +11 +63.6875 +21 +-20.6875 +0 +LINE +8 +0 +10 +63.6875 +20 +-20.6875 +11 +79.1875 +21 +-20.6875 +0 +LINE +8 +0 +10 +79.1875 +20 +-20.6875 +11 +79.1875 +21 +-7.8875 +0 +LINE +8 +0 +10 +60.1375 +20 +-7.8875 +11 +44.6375 +21 +-7.8875 +0 +LINE +8 +0 +10 +44.6375 +20 +-7.8875 +11 +44.6375 +21 +-20.6875 +0 +LINE +8 +0 +10 +44.6375 +20 +-20.6875 +11 +60.1375 +21 +-20.6875 +0 +LINE +8 +0 +10 +60.1375 +20 +-20.6875 +11 +60.1375 +21 +-7.8875 +0 +LINE +8 +0 +10 +88.7125 +20 +-26.9375 +11 +73.2125 +21 +-26.9375 +0 +LINE +8 +0 +10 +73.2125 +20 +-26.9375 +11 +73.2125 +21 +-39.7375 +0 +LINE +8 +0 +10 +73.2125 +20 +-39.7375 +11 +88.7125 +21 +-39.7375 +0 +LINE +8 +0 +10 +88.7125 +20 +-39.7375 +11 +88.7125 +21 +-26.9375 +0 +LINE +8 +0 +10 +69.6625 +20 +-26.9375 +11 +54.1625 +21 +-26.9375 +0 +LINE +8 +0 +10 +54.1625 +20 +-26.9375 +11 +54.1625 +21 +-39.7375 +0 +LINE +8 +0 +10 +54.1625 +20 +-39.7375 +11 +69.6625 +21 +-39.7375 +0 +LINE +8 +0 +10 +69.6625 +20 +-39.7375 +11 +69.6625 +21 +-26.9375 +0 +LINE +8 +0 +10 +74.425 +20 +-45.9875 +11 +58.925 +21 +-45.9875 +0 +LINE +8 +0 +10 +58.925 +20 +-45.9875 +11 +58.925 +21 +-58.7875 +0 +LINE +8 +0 +10 +58.925 +20 +-58.7875 +11 +74.425 +21 +-58.7875 +0 +LINE +8 +0 +10 +74.425 +20 +-58.7875 +11 +74.425 +21 +-45.9875 +0 +LINE +8 +0 +10 +64.9 +20 +-65.0375 +11 +49.4 +21 +-65.0375 +0 +LINE +8 +0 +10 +49.4 +20 +-65.0375 +11 +49.4 +21 +-77.8375 +0 +LINE +8 +0 +10 +49.4 +20 +-77.8375 +11 +64.9 +21 +-77.8375 +0 +LINE +8 +0 +10 +64.9 +20 +-77.8375 +11 +64.9 +21 +-65.0375 +0 +LINE +8 +0 +10 +52.9937 +20 +-84.0875 +11 +37.4937 +21 +-84.0875 +0 +LINE +8 +0 +10 +37.4937 +20 +-84.0875 +11 +37.4937 +21 +-96.8875 +0 +LINE +8 +0 +10 +37.4937 +20 +-96.8875 +11 +52.9937 +21 +-96.8875 +0 +LINE +8 +0 +10 +52.9937 +20 +-96.8875 +11 +52.9937 +21 +-84.0875 +0 +LINE +8 +0 +10 +41.0875 +20 +-7.8875 +11 +25.5875 +21 +-7.8875 +0 +LINE +8 +0 +10 +25.5875 +20 +-7.8875 +11 +25.5875 +21 +-20.6875 +0 +LINE +8 +0 +10 +25.5875 +20 +-20.6875 +11 +41.0875 +21 +-20.6875 +0 +LINE +8 +0 +10 +41.0875 +20 +-20.6875 +11 +41.0875 +21 +-7.8875 +0 +LINE +8 +0 +10 +22.0375 +20 +-7.8875 +11 +6.5375 +21 +-7.8875 +0 +LINE +8 +0 +10 +6.5375 +20 +-7.8875 +11 +6.5375 +21 +-20.6875 +0 +LINE +8 +0 +10 +6.5375 +20 +-20.6875 +11 +22.0375 +21 +-20.6875 +0 +LINE +8 +0 +10 +22.0375 +20 +-20.6875 +11 +22.0375 +21 +-7.8875 +0 +LINE +8 +0 +10 +50.6125 +20 +-26.9375 +11 +35.1125 +21 +-26.9375 +0 +LINE +8 +0 +10 +35.1125 +20 +-26.9375 +11 +35.1125 +21 +-39.7375 +0 +LINE +8 +0 +10 +35.1125 +20 +-39.7375 +11 +50.6125 +21 +-39.7375 +0 +LINE +8 +0 +10 +50.6125 +20 +-39.7375 +11 +50.6125 +21 +-26.9375 +0 +LINE +8 +0 +10 +26.8 +20 +-26.9375 +11 +11.3 +21 +-26.9375 +0 +LINE +8 +0 +10 +11.3 +20 +-26.9375 +11 +11.3 +21 +-39.7375 +0 +LINE +8 +0 +10 +11.3 +20 +-39.7375 +11 +26.8 +21 +-39.7375 +0 +LINE +8 +0 +10 +26.8 +20 +-39.7375 +11 +26.8 +21 +-26.9375 +0 +LINE +8 +0 +10 +55.375 +20 +-45.9875 +11 +39.875 +21 +-45.9875 +0 +LINE +8 +0 +10 +39.875 +20 +-45.9875 +11 +39.875 +21 +-58.7875 +0 +LINE +8 +0 +10 +39.875 +20 +-58.7875 +11 +55.375 +21 +-58.7875 +0 +LINE +8 +0 +10 +55.375 +20 +-58.7875 +11 +55.375 +21 +-45.9875 +0 +LINE +8 +0 +10 +29.18125 +20 +-45.9875 +11 +13.68125 +21 +-45.9875 +0 +LINE +8 +0 +10 +13.68125 +20 +-45.9875 +11 +13.68125 +21 +-58.7875 +0 +LINE +8 +0 +10 +13.68125 +20 +-58.7875 +11 +29.18125 +21 +-58.7875 +0 +LINE +8 +0 +10 +29.18125 +20 +-58.7875 +11 +29.18125 +21 +-45.9875 +0 +LINE +8 +0 +10 +26.8 +20 +-84.0875 +11 +11.3 +21 +-84.0875 +0 +LINE +8 +0 +10 +11.3 +20 +-84.0875 +11 +11.3 +21 +-96.8875 +0 +LINE +8 +0 +10 +11.3 +20 +-96.8875 +11 +26.8 +21 +-96.8875 +0 +LINE +8 +0 +10 +26.8 +20 +-96.8875 +11 +26.8 +21 +-84.0875 +0 +LINE +8 +0 +10 +260.1625 +20 +-26.9375 +11 +244.6625 +21 +-26.9375 +0 +LINE +8 +0 +10 +244.6625 +20 +-26.9375 +11 +244.6625 +21 +-39.7375 +0 +LINE +8 +0 +10 +244.6625 +20 +-39.7375 +11 +260.1625 +21 +-39.7375 +0 +LINE +8 +0 +10 +260.1625 +20 +-39.7375 +11 +260.1625 +21 +-26.9375 +0 +LINE +8 +0 +10 +283.975 +20 +-26.9375 +11 +268.475 +21 +-26.9375 +0 +LINE +8 +0 +10 +268.475 +20 +-26.9375 +11 +268.475 +21 +-39.7375 +0 +LINE +8 +0 +10 +268.475 +20 +-39.7375 +11 +283.975 +21 +-39.7375 +0 +LINE +8 +0 +10 +283.975 +20 +-39.7375 +11 +283.975 +21 +-26.9375 +0 +LINE +8 +0 +10 +283.975 +20 +-84.0875 +11 +268.475 +21 +-84.0875 +0 +LINE +8 +0 +10 +268.475 +20 +-84.0875 +11 +268.475 +21 +-96.8875 +0 +LINE +8 +0 +10 +268.475 +20 +-96.8875 +11 +283.975 +21 +-96.8875 +0 +LINE +8 +0 +10 +283.975 +20 +-96.8875 +11 +283.975 +21 +-84.0875 +0 +LINE +8 +0 +10 +250.6375 +20 +-7.8875 +11 +235.1375 +21 +-7.8875 +0 +LINE +8 +0 +10 +235.1375 +20 +-7.8875 +11 +235.1375 +21 +-20.6875 +0 +LINE +8 +0 +10 +235.1375 +20 +-20.6875 +11 +250.6375 +21 +-20.6875 +0 +LINE +8 +0 +10 +250.6375 +20 +-20.6875 +11 +250.6375 +21 +-7.8875 +0 +LINE +8 +0 +10 +241.1125 +20 +-26.9375 +11 +225.6125 +21 +-26.9375 +0 +LINE +8 +0 +10 +225.6125 +20 +-26.9375 +11 +225.6125 +21 +-39.7375 +0 +LINE +8 +0 +10 +225.6125 +20 +-39.7375 +11 +241.1125 +21 +-39.7375 +0 +LINE +8 +0 +10 +241.1125 +20 +-39.7375 +11 +241.1125 +21 +-26.9375 +0 +LINE +8 +0 +10 +222.0625 +20 +-26.9375 +11 +206.5625 +21 +-26.9375 +0 +LINE +8 +0 +10 +206.5625 +20 +-26.9375 +11 +206.5625 +21 +-39.7375 +0 +LINE +8 +0 +10 +206.5625 +20 +-39.7375 +11 +222.0625 +21 +-39.7375 +0 +LINE +8 +0 +10 +222.0625 +20 +-39.7375 +11 +222.0625 +21 +-26.9375 +0 +LINE +8 +0 +10 +245.875 +20 +-45.9875 +11 +230.375 +21 +-45.9875 +0 +LINE +8 +0 +10 +230.375 +20 +-45.9875 +11 +230.375 +21 +-58.7875 +0 +LINE +8 +0 +10 +230.375 +20 +-58.7875 +11 +245.875 +21 +-58.7875 +0 +LINE +8 +0 +10 +245.875 +20 +-58.7875 +11 +245.875 +21 +-45.9875 +0 +LINE +8 +0 +10 +226.825 +20 +-45.9875 +11 +211.325 +21 +-45.9875 +0 +LINE +8 +0 +10 +211.325 +20 +-45.9875 +11 +211.325 +21 +-58.7875 +0 +LINE +8 +0 +10 +211.325 +20 +-58.7875 +11 +226.825 +21 +-58.7875 +0 +LINE +8 +0 +10 +226.825 +20 +-58.7875 +11 +226.825 +21 +-45.9875 +0 +LINE +8 +0 +10 +236.35 +20 +-65.0375 +11 +220.85 +21 +-65.0375 +0 +LINE +8 +0 +10 +220.85 +20 +-65.0375 +11 +220.85 +21 +-77.8375 +0 +LINE +8 +0 +10 +220.85 +20 +-77.8375 +11 +236.35 +21 +-77.8375 +0 +LINE +8 +0 +10 +236.35 +20 +-77.8375 +11 +236.35 +21 +-65.0375 +0 +LINE +8 +0 +10 +217.3 +20 +-65.0375 +11 +201.8 +21 +-65.0375 +0 +LINE +8 +0 +10 +201.8 +20 +-65.0375 +11 +201.8 +21 +-77.8375 +0 +LINE +8 +0 +10 +201.8 +20 +-77.8375 +11 +217.3 +21 +-77.8375 +0 +LINE +8 +0 +10 +217.3 +20 +-77.8375 +11 +217.3 +21 +-65.0375 +0 +LINE +8 +0 +10 +257.78125 +20 +-84.0875 +11 +242.28125 +21 +-84.0875 +0 +LINE +8 +0 +10 +242.28125 +20 +-84.0875 +11 +242.28125 +21 +-96.8875 +0 +LINE +8 +0 +10 +242.28125 +20 +-96.8875 +11 +257.78125 +21 +-96.8875 +0 +LINE +8 +0 +10 +257.78125 +20 +-96.8875 +11 +257.78125 +21 +-84.0875 +0 +LINE +8 +0 +10 +231.5875 +20 +-7.8875 +11 +216.0875 +21 +-7.8875 +0 +LINE +8 +0 +10 +216.0875 +20 +-7.8875 +11 +216.0875 +21 +-20.6875 +0 +LINE +8 +0 +10 +216.0875 +20 +-20.6875 +11 +231.5875 +21 +-20.6875 +0 +LINE +8 +0 +10 +231.5875 +20 +-20.6875 +11 +231.5875 +21 +-7.8875 +0 +LINE +8 +0 +10 +212.5375 +20 +-7.8875 +11 +197.0375 +21 +-7.8875 +0 +LINE +8 +0 +10 +197.0375 +20 +-7.8875 +11 +197.0375 +21 +-20.6875 +0 +LINE +8 +0 +10 +197.0375 +20 +-20.6875 +11 +212.5375 +21 +-20.6875 +0 +LINE +8 +0 +10 +212.5375 +20 +-20.6875 +11 +212.5375 +21 +-7.8875 +0 +LINE +8 +0 +10 +203.0125 +20 +-26.9375 +11 +187.5125 +21 +-26.9375 +0 +LINE +8 +0 +10 +187.5125 +20 +-26.9375 +11 +187.5125 +21 +-39.7375 +0 +LINE +8 +0 +10 +187.5125 +20 +-39.7375 +11 +203.0125 +21 +-39.7375 +0 +LINE +8 +0 +10 +203.0125 +20 +-39.7375 +11 +203.0125 +21 +-26.9375 +0 +LINE +8 +0 +10 +207.775 +20 +-45.9875 +11 +192.275 +21 +-45.9875 +0 +LINE +8 +0 +10 +192.275 +20 +-45.9875 +11 +192.275 +21 +-58.7875 +0 +LINE +8 +0 +10 +192.275 +20 +-58.7875 +11 +207.775 +21 +-58.7875 +0 +LINE +8 +0 +10 +207.775 +20 +-58.7875 +11 +207.775 +21 +-45.9875 +0 +LINE +8 +0 +10 +188.725 +20 +-45.9875 +11 +173.225 +21 +-45.9875 +0 +LINE +8 +0 +10 +173.225 +20 +-45.9875 +11 +173.225 +21 +-58.7875 +0 +LINE +8 +0 +10 +173.225 +20 +-58.7875 +11 +188.725 +21 +-58.7875 +0 +LINE +8 +0 +10 +188.725 +20 +-58.7875 +11 +188.725 +21 +-45.9875 +0 +LINE +8 +0 +10 +198.25 +20 +-65.0375 +11 +182.75 +21 +-65.0375 +0 +LINE +8 +0 +10 +182.75 +20 +-65.0375 +11 +182.75 +21 +-77.8375 +0 +LINE +8 +0 +10 +182.75 +20 +-77.8375 +11 +198.25 +21 +-77.8375 +0 +LINE +8 +0 +10 +198.25 +20 +-77.8375 +11 +198.25 +21 +-65.0375 +0 +LINE +8 +0 +10 +179.2 +20 +-65.0375 +11 +163.7 +21 +-65.0375 +0 +LINE +8 +0 +10 +163.7 +20 +-65.0375 +11 +163.7 +21 +-77.8375 +0 +LINE +8 +0 +10 +163.7 +20 +-77.8375 +11 +179.2 +21 +-77.8375 +0 +LINE +8 +0 +10 +179.2 +20 +-77.8375 +11 +179.2 +21 +-65.0375 +0 +LINE +8 +0 +10 +231.5875 +20 +-84.0875 +11 +216.0875 +21 +-84.0875 +0 +LINE +8 +0 +10 +216.0875 +20 +-84.0875 +11 +216.0875 +21 +-96.8875 +0 +LINE +8 +0 +10 +216.0875 +20 +-96.8875 +11 +231.5875 +21 +-96.8875 +0 +LINE +8 +0 +10 +231.5875 +20 +-96.8875 +11 +231.5875 +21 +-84.0875 +0 +LINE +8 +0 +10 +244.01875 +20 +-75.3375 +11 +244.01875 +21 +-80.4375 +0 +LINE +8 +0 +10 +244.01875 +20 +-80.4375 +11 +241.41875 +21 +-80.4375 +0 +LINE +8 +0 +10 +241.41875 +20 +-80.4375 +11 +241.41875 +21 +-75.3375 +0 +LINE +8 +0 +10 +241.41875 +20 +-75.3375 +11 +244.01875 +21 +-75.3375 +0 +LINE +8 +0 +10 +284.61875 +20 +-75.3375 +11 +284.61875 +21 +-80.4375 +0 +LINE +8 +0 +10 +284.61875 +20 +-80.4375 +11 +287.21875 +21 +-80.4375 +0 +LINE +8 +0 +10 +287.21875 +20 +-80.4375 +11 +287.21875 +21 +-75.3375 +0 +LINE +8 +0 +10 +287.21875 +20 +-75.3375 +11 +284.61875 +21 +-75.3375 +0 +LINE +8 +0 +10 +272.06875 +20 +-65.0375 +11 +256.56875 +21 +-65.0375 +0 +LINE +8 +0 +10 +256.56875 +20 +-65.0375 +11 +256.56875 +21 +-77.8375 +0 +LINE +8 +0 +10 +256.56875 +20 +-77.8375 +11 +272.06875 +21 +-77.8375 +0 +LINE +8 +0 +10 +272.06875 +20 +-77.8375 +11 +272.06875 +21 +-65.0375 +0 +TEXT +8 +Cmts +62 +1 +10 +303.847897 +20 +-52.73062 +1 +95.000 mm +40 +1.5 +41 +1.5 +50 +270.186984 +7 +SIMPLEX +72 +1 +73 +2 +11 +303.847897 +21 +-52.73062 +0 +LINE +8 +Cmts +62 +1 +10 +287.34 +20 +-100.28 +11 +305.35289 +21 +-100.221215 +0 +LINE +8 +Cmts +62 +1 +10 +287.03 +20 +-5.29 +11 +305.04289 +21 +-5.231215 +0 +LINE +8 +Cmts +62 +1 +10 +302.342904 +20 +-5.240026 +11 +302.652904 +21 +-100.230026 +0 +LINE +8 +Cmts +62 +1 +10 +302.652904 +20 +-100.230026 +11 +302.06281 +21 +-99.105442 +0 +LINE +8 +Cmts +62 +1 +10 +302.652904 +20 +-100.230026 +11 +303.235645 +21 +-99.101614 +0 +LINE +8 +Cmts +62 +1 +10 +302.342904 +20 +-5.240026 +11 +301.760163 +21 +-6.368438 +0 +LINE +8 +Cmts +62 +1 +10 +302.342904 +20 +-5.240026 +11 +302.932998 +21 +-6.36461 +0 +TEXT +8 +Cmts +62 +1 +10 +17.92 +20 +-43.7 +1 +25.6125 mm +40 +1.5 +41 +1.5 +7 +SIMPLEX +72 +1 +73 +2 +11 +17.92 +21 +-43.7 +0 +LINE +8 +Cmts +62 +1 +10 +30.71 +20 +-33.34 +11 +30.71 +21 +-45.05 +0 +LINE +8 +Cmts +62 +1 +10 +5.13 +20 +-33.34 +11 +5.13 +21 +-45.05 +0 +LINE +8 +Cmts +62 +1 +10 +5.13 +20 +-42.35 +11 +30.71 +21 +-42.35 +0 +LINE +8 +Cmts +62 +1 +10 +30.71 +20 +-42.35 +11 +29.583496 +21 +-42.936421 +0 +LINE +8 +Cmts +62 +1 +10 +30.71 +20 +-42.35 +11 +29.583496 +21 +-41.763579 +0 +LINE +8 +Cmts +62 +1 +10 +5.13 +20 +-42.35 +11 +6.256504 +21 +-42.936421 +0 +LINE +8 +Cmts +62 +1 +10 +5.13 +20 +-42.35 +11 +6.256504 +21 +-41.763579 +0 +TEXT +8 +Cmts +62 +1 +10 +277.347461 +20 +-39.634741 +1 +25.6125 mm +40 +1.5 +41 +1.5 +50 +0.022425 +7 +SIMPLEX +72 +1 +73 +2 +11 +277.347461 +21 +-39.634741 +0 +LINE +8 +Cmts +62 +1 +10 +290.12 +20 +-33.34 +11 +290.12299 +21 +-40.979741 +0 +LINE +8 +Cmts +62 +1 +10 +264.57 +20 +-33.35 +11 +264.57299 +21 +-40.989741 +0 +LINE +8 +Cmts +62 +1 +10 +264.571933 +20 +-38.289741 +11 +290.121933 +21 +-38.279741 +0 +LINE +8 +Cmts +62 +1 +10 +290.121933 +20 +-38.279741 +11 +288.995659 +21 +-38.866603 +0 +LINE +8 +Cmts +62 +1 +10 +290.121933 +20 +-38.279741 +11 +288.9952 +21 +-37.693761 +0 +LINE +8 +Cmts +62 +1 +10 +264.571933 +20 +-38.289741 +11 +265.698666 +21 +-38.875721 +0 +LINE +8 +Cmts +62 +1 +10 +264.571933 +20 +-38.289741 +11 +265.698207 +21 +-37.702879 +0 +TEXT +8 +Cmts +62 +1 +10 +202.7 +20 +-90.49 +1 +6.300 mm +40 +1.5 +41 +1.5 +50 +270.0 +7 +SIMPLEX +72 +1 +73 +2 +11 +202.7 +21 +-90.49 +0 +LINE +8 +Cmts +62 +1 +10 +195.44 +20 +-93.64 +11 +204.05 +21 +-93.64 +0 +LINE +8 +Cmts +62 +1 +10 +195.44 +20 +-87.34 +11 +204.05 +21 +-87.34 +0 +LINE +8 +Cmts +62 +1 +10 +201.35 +20 +-87.34 +11 +201.35 +21 +-93.64 +0 +LINE +8 +Cmts +62 +1 +10 +201.35 +20 +-93.64 +11 +200.763579 +21 +-92.513496 +0 +LINE +8 +Cmts +62 +1 +10 +201.35 +20 +-93.64 +11 +201.936421 +21 +-92.513496 +0 +LINE +8 +Cmts +62 +1 +10 +201.35 +20 +-87.34 +11 +200.763579 +21 +-88.466504 +0 +LINE +8 +Cmts +62 +1 +10 +201.35 +20 +-87.34 +11 +201.936421 +21 +-88.466504 +0 +TEXT +8 +Cmts +62 +1 +10 +258.43468 +20 +-33.349763 +1 +6.300 mm +40 +1.5 +41 +1.5 +50 +270.090946 +7 +SIMPLEX +72 +1 +73 +2 +11 +258.43468 +21 +-33.349763 +0 +LINE +8 +Cmts +62 +1 +10 +264.59 +20 +-36.49 +11 +257.089682 +21 +-36.501906 +0 +LINE +8 +Cmts +62 +1 +10 +264.58 +20 +-30.19 +11 +257.079682 +21 +-30.201906 +0 +LINE +8 +Cmts +62 +1 +10 +259.779679 +20 +-30.19762 +11 +259.789679 +21 +-36.49762 +0 +LINE +8 +Cmts +62 +1 +10 +259.789679 +20 +-36.49762 +11 +259.201471 +21 +-35.372048 +0 +LINE +8 +Cmts +62 +1 +10 +259.789679 +20 +-36.49762 +11 +260.374311 +21 +-35.370187 +0 +LINE +8 +Cmts +62 +1 +10 +259.779679 +20 +-30.19762 +11 +259.195047 +21 +-31.325053 +0 +LINE +8 +Cmts +62 +1 +10 +259.779679 +20 +-30.19762 +11 +260.367887 +21 +-31.323192 +0 +TEXT +8 +Cmts +62 +1 +10 +24.47 +20 +-33.33 +1 +6.300 mm +40 +1.5 +41 +1.5 +50 +270.0 +7 +SIMPLEX +72 +1 +73 +2 +11 +24.47 +21 +-33.33 +0 +LINE +8 +Cmts +62 +1 +10 +30.72 +20 +-36.48 +11 +23.12 +21 +-36.48 +0 +LINE +8 +Cmts +62 +1 +10 +30.72 +20 +-30.18 +11 +23.12 +21 +-30.18 +0 +LINE +8 +Cmts +62 +1 +10 +25.82 +20 +-30.18 +11 +25.82 +21 +-36.48 +0 +LINE +8 +Cmts +62 +1 +10 +25.82 +20 +-36.48 +11 +25.233579 +21 +-35.353496 +0 +LINE +8 +Cmts +62 +1 +10 +25.82 +20 +-36.48 +11 +26.406421 +21 +-35.353496 +0 +LINE +8 +Cmts +62 +1 +10 +25.82 +20 +-30.18 +11 +25.233579 +21 +-31.306504 +0 +LINE +8 +Cmts +62 +1 +10 +25.82 +20 +-30.18 +11 +26.406421 +21 +-31.306504 +0 +TEXT +8 +Cmts +62 +1 +10 +103.46 +20 +-90.49 +1 +6.300 mm +40 +1.5 +41 +1.5 +50 +270.0 +7 +SIMPLEX +72 +1 +73 +2 +11 +103.46 +21 +-90.49 +0 +LINE +8 +Cmts +62 +1 +10 +109.64 +20 +-93.64 +11 +102.11 +21 +-93.64 +0 +LINE +8 +Cmts +62 +1 +10 +109.64 +20 +-87.34 +11 +102.11 +21 +-87.34 +0 +LINE +8 +Cmts +62 +1 +10 +104.81 +20 +-87.34 +11 +104.81 +21 +-93.64 +0 +LINE +8 +Cmts +62 +1 +10 +104.81 +20 +-93.64 +11 +104.223579 +21 +-92.513496 +0 +LINE +8 +Cmts +62 +1 +10 +104.81 +20 +-93.64 +11 +105.396421 +21 +-92.513496 +0 +LINE +8 +Cmts +62 +1 +10 +104.81 +20 +-87.34 +11 +104.223579 +21 +-88.466504 +0 +LINE +8 +Cmts +62 +1 +10 +104.81 +20 +-87.34 +11 +105.396421 +21 +-88.466504 +0 +TEXT +8 +Cmts +62 +1 +10 +171.54 +20 +-78.67 +1 +47.800 mm +40 +1.5 +41 +1.5 +7 +SIMPLEX +72 +1 +73 +2 +11 +171.54 +21 +-78.67 +0 +LINE +8 +Cmts +62 +1 +10 +147.64 +20 +-90.49 +11 +147.64 +21 +-77.32 +0 +LINE +8 +Cmts +62 +1 +10 +195.44 +20 +-90.49 +11 +195.44 +21 +-77.32 +0 +LINE +8 +Cmts +62 +1 +10 +195.44 +20 +-80.02 +11 +147.64 +21 +-80.02 +0 +LINE +8 +Cmts +62 +1 +10 +147.64 +20 +-80.02 +11 +148.766504 +21 +-79.433579 +0 +LINE +8 +Cmts +62 +1 +10 +147.64 +20 +-80.02 +11 +148.766504 +21 +-80.606421 +0 +LINE +8 +Cmts +62 +1 +10 +195.44 +20 +-80.02 +11 +194.313496 +21 +-79.433579 +0 +LINE +8 +Cmts +62 +1 +10 +195.44 +20 +-80.02 +11 +194.313496 +21 +-80.606421 +0 +TEXT +8 +Cmts +62 +1 +10 +128.64 +20 +-109.43 +1 +38.000 mm +40 +1.5 +41 +1.5 +7 +SIMPLEX +72 +1 +73 +2 +11 +128.64 +21 +-109.43 +0 +LINE +8 +Cmts +62 +1 +10 +109.64 +20 +-90.48 +11 +109.64 +21 +-110.78 +0 +LINE +8 +Cmts +62 +1 +10 +147.64 +20 +-90.48 +11 +147.64 +21 +-110.78 +0 +LINE +8 +Cmts +62 +1 +10 +147.64 +20 +-108.08 +11 +109.64 +21 +-108.08 +0 +LINE +8 +Cmts +62 +1 +10 +109.64 +20 +-108.08 +11 +110.766504 +21 +-107.493579 +0 +LINE +8 +Cmts +62 +1 +10 +109.64 +20 +-108.08 +11 +110.766504 +21 +-108.666421 +0 +LINE +8 +Cmts +62 +1 +10 +147.64 +20 +-108.08 +11 +146.513496 +21 +-107.493579 +0 +LINE +8 +Cmts +62 +1 +10 +147.64 +20 +-108.08 +11 +146.513496 +21 +-108.666421 +0 +TEXT +8 +Cmts +62 +1 +10 +197.96 +20 +-99.88 +1 +0.800 mm +40 +1.5 +41 +1.5 +50 +270.0 +7 +SIMPLEX +72 +1 +73 +2 +11 +197.96 +21 +-99.88 +0 +LINE +8 +Cmts +62 +1 +10 +194.38 +20 +-100.28 +11 +199.31 +21 +-100.28 +0 +LINE +8 +Cmts +62 +1 +10 +194.38 +20 +-99.48 +11 +199.31 +21 +-99.48 +0 +LINE +8 +Cmts +62 +1 +10 +196.61 +20 +-99.48 +11 +196.61 +21 +-100.28 +0 +LINE +8 +Cmts +62 +1 +10 +196.61 +20 +-100.28 +11 +196.023579 +21 +-99.153496 +0 +LINE +8 +Cmts +62 +1 +10 +196.61 +20 +-100.28 +11 +197.196421 +21 +-99.153496 +0 +LINE +8 +Cmts +62 +1 +10 +196.61 +20 +-99.48 +11 +196.023579 +21 +-100.606504 +0 +LINE +8 +Cmts +62 +1 +10 +196.61 +20 +-99.48 +11 +197.196421 +21 +-100.606504 +0 +TEXT +8 +Cmts +62 +1 +10 +188.875133 +20 +-92.417616 +1 +3.900 mm +40 +1.5 +41 +1.5 +50 +89.559272 +7 +SIMPLEX +72 +1 +73 +2 +11 +188.875133 +21 +-92.417616 +0 +LINE +8 +Cmts +62 +1 +10 +191.77 +20 +-94.39 +11 +187.510173 +21 +-94.357232 +0 +LINE +8 +Cmt