From b9c9f3759a63e4bfd1b2a6f8c3b407426f38ee84 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Sat, 23 Oct 2021 05:17:07 +0100 Subject: Remove legacy handling for ErgoDox Infinity handedness (#14919) --- keyboards/ergodox_infinity/readme.md | 24 +++++------------------- 1 file changed, 5 insertions(+), 19 deletions(-) (limited to 'keyboards') diff --git a/keyboards/ergodox_infinity/readme.md b/keyboards/ergodox_infinity/readme.md index 73ee3bc1df..c51bdd7c82 100644 --- a/keyboards/ergodox_infinity/readme.md +++ b/keyboards/ergodox_infinity/readme.md @@ -13,18 +13,16 @@ for the left and right halves seperately. To flash them: - Install the firmware with `sudo make ergodox_infinity:keymapname:dfu-util` - - Build right hand firmware with `make ergodox_infinity:keymapname MASTER=right` - - Plug in the right hand keyboard only. - Press the program button (back of keyboard, above thumb pad). - - Install the firmware with `sudo make ergodox_infinity:keymapname:dfu-util MASTER=right` + - Install the firmware with `sudo make ergodox_infinity:keymapname:dfu-util` More information on the Infinity firmware is available in the [TMK/chibios for Input Club Infinity Ergodox](https://github.com/fredizzimo/infinity_ergodox/blob/master/README.md) -## Infinity Master/Two Halves +## Infinity Two Halves The Infinity is two completely independent keyboards, that can connect together. You have a few options in how you flash the firmware: @@ -32,21 +30,10 @@ You have a few options in how you flash the firmware: - Add `#define EE_HANDS` to your config.h, initialize the EEPROM values (see below), and then flash the same firmware to both halves. -- Flash the left half, rebuild the firmware with "MASTER=right" and then flash - the right half. This allows you to plug in either half directly to the - computer and is what the above instructions do. - -- Flash the left half, then flash the same firmware on the right. This only - works when the left half is plugged directly to the computer and the keymap - is mirrored. It saves the small extra step of rebuilding with - "MASTER=right". - -- The same as the previous one but with "MASTER=right" when you build the - firmware, then flash the same firmware to both halves. You just have to - directly connect the right half to the computer. +- Flash with the instructions above, which assume the left hand is connected to USB. - For minor changes such as changing only the keymap without having updated - any part of the firmware code itself, you can program only the MASTER half, + any part of the firmware code itself, you can program only the half connected to USB, but it is safest to program both halves. ### EE_HANDS initialization @@ -74,7 +61,6 @@ They only need to be done once, unless you reset the EEPROM later. - Add `#define EE_HANDS` to the config.h file of your keymap, and build your firmware using `make ergodox_infinity:keymapname`. - - After this, you can flash both halves with the same firmware, _without_ having to rebuild with - "MASTER=right" or risking a mirrored keyboard when connected the wrong way. + - After this, you can flash both halves with the same firmware, _without_ risking a mirrored keyboard when connected the wrong way. If you reset your EEPROM later, you'll have to follow these steps again, though. -- cgit v1.2.3