From a7bc02bf69b6973ee031662a0b8a705d8cd83193 Mon Sep 17 00:00:00 2001 From: Albert Y <76888457+filterpaper@users.noreply.github.com> Date: Mon, 29 Nov 2021 16:19:00 +0800 Subject: [Keyboard] Sweep swap hand feature and pin documentation (#15264) Co-authored-by: filterpaper --- keyboards/ferris/sweep/readme.md | 26 ++++++++++++++++++++++---- keyboards/ferris/sweep/sweep.c | 17 +++++++++++++++++ 2 files changed, 39 insertions(+), 4 deletions(-) (limited to 'keyboards') diff --git a/keyboards/ferris/sweep/readme.md b/keyboards/ferris/sweep/readme.md index a8cbf8fd80..0379c4c813 100644 --- a/keyboards/ferris/sweep/readme.md +++ b/keyboards/ferris/sweep/readme.md @@ -8,9 +8,8 @@ A version of the Ferris keyboard that uses a daughterboard, designed by the fant ## Keyboard Info * Keyboard Maintainer: [Pierre Chevalier](https://github.com/pierrechevalier83) -* Hardware Supported: - * Ferris sweep (With pro-micro. Comes in a couple of PCB edge cuts shapes, but with identical pinout) -* Hardware Availability: @iamnotyourbroom in the 40% discord chat server may have some spares for you. +* Hardware Supported: [Sweep](https://github.com/davidphilipbarr/Sweep) (all versions) +* Hardware Availability: Print the PCB with gerber files from the repository Make example for this keyboard (after setting up your build environment): @@ -20,7 +19,7 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Setting Handedness -Keyboard uses [handedness by EEPROM](https://docs.qmk.fm/#/feature_split_keyboard?id=handedness-by-eeprom) as default. The make commands are: +Firmware uses [handedness by EEPROM](https://docs.qmk.fm/#/feature_split_keyboard?id=handedness-by-eeprom) as default and it must be *configured once* on each side. The make commands are: make ferris/sweep:default:avrdude-split-left make ferris/sweep:default:avrdude-split-right @@ -35,3 +34,22 @@ Enter the bootloader in 3 ways: * **Physical reset button**: Briefly press the reset button soldered on the PCB. * **Keycode in layout**: Press the key mapped to `RESET` if it is configured. +## Swapped Pins + +If you printed one of the PCB variant with swapped letters `Q` and `B` / `P` and `N`, add the following code to your keymap's `config.h` to swap pins `E6` and `D7` in the firmware: +```c +#undef DIRECT_PINS +#define DIRECT_PINS { \ + { D7, F7, F6, F5, F4 }, \ + { B1, B3, B2, B6, D3 }, \ + { D1, D0, D4, C6, E6 }, \ + { B4, B5, NO_PIN, NO_PIN, NO_PIN } \ +} +#undef DIRECT_PINS_RIGHT +#define DIRECT_PINS_RIGHT { \ + { F4, F5, F6, F7, D7 }, \ + { D3, B6, B2, B3, B1 }, \ + { E6, C6, D4, D0, D1 }, \ + { B5, B4, NO_PIN, NO_PIN, NO_PIN } \ +} +``` diff --git a/keyboards/ferris/sweep/sweep.c b/keyboards/ferris/sweep/sweep.c index 5b41bad848..98467f18ae 100644 --- a/keyboards/ferris/sweep/sweep.c +++ b/keyboards/ferris/sweep/sweep.c @@ -14,3 +14,20 @@ * along with this program. If not, see . */ #include "sweep.h" + +#ifdef SWAP_HANDS_ENABLE +__attribute__ ((weak)) +const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { + // Left + {{4, 4}, {3, 4}, {2, 4}, {1, 4}, {0, 4}}, + {{4, 5}, {3, 5}, {2, 5}, {1, 5}, {0, 5}}, + {{4, 6}, {3, 6}, {2, 6}, {1, 6}, {0, 6}}, + {{1, 7}, {0, 7}, {2, 7}, {3, 7}, {4, 7}}, + // Right + {{4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}}, + {{4, 1}, {3, 1}, {2, 1}, {1, 1}, {0, 1}}, + {{4, 2}, {3, 2}, {2, 2}, {1, 2}, {0, 2}}, + {{1, 3}, {0, 3}, {2, 3}, {3, 3}, {4, 3}} +}; +#endif + -- cgit v1.2.3