From 63e406eca4da805617889f7ab769a781c0046742 Mon Sep 17 00:00:00 2001 From: Stephen Tudor Date: Thu, 26 Jan 2017 00:24:51 -0500 Subject: Add smt keymap for Planck --- keyboards/planck/keymaps/smt/Makefile | 3 + keyboards/planck/keymaps/smt/keymap.c | 232 +++++++++++++++++++++++++++++++++ keyboards/planck/keymaps/smt/readme.md | 78 +++++++++++ 3 files changed, 313 insertions(+) create mode 100644 keyboards/planck/keymaps/smt/Makefile create mode 100644 keyboards/planck/keymaps/smt/keymap.c create mode 100644 keyboards/planck/keymaps/smt/readme.md (limited to 'keyboards') diff --git a/keyboards/planck/keymaps/smt/Makefile b/keyboards/planck/keymaps/smt/Makefile new file mode 100644 index 0000000000..457a3d01d4 --- /dev/null +++ b/keyboards/planck/keymaps/smt/Makefile @@ -0,0 +1,3 @@ +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/planck/keymaps/smt/keymap.c b/keyboards/planck/keymaps/smt/keymap.c new file mode 100644 index 0000000000..47e9d8c707 --- /dev/null +++ b/keyboards/planck/keymaps/smt/keymap.c @@ -0,0 +1,232 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "planck.h" +#include "action_layer.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _DVORAK 0 +#define _QWERTY 1 +#define _LOWER 2 +#define _RAISE 3 +#define _ADJUST 16 + +enum planck_keycodes { + DVORAK = SAFE_RANGE, + QWERTY, + LOWER, + RAISE, + BACKLIT +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | - | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = { + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, + {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_T(KC_ENT)}, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {_______, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {_______, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {_______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +}, + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | F1 | F2 | F3 | F4 | F5 | F6 | 4 | 5 | 6 | Home |PageUp| + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | 1 | 2 | 3 | End |PageDn| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL}, + {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_4, KC_5, KC_6, KC_HOME, KC_PGUP}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_1, KC_2, KC_3, KC_END, KC_PGDN}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | | | | | _ | ? | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | - | / | = | [ | ] | \ | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = { + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL}, + {_______, _______, _______, _______, _______, _______, KC_UNDS, KC_QUES, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {_______, _______, _______, _______, _______, _______, KC_MINS, KC_SLSH, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Dvorak|Qwerty| | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}, + {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, DVORAK, QWERTY, _______, _______, _______}, + {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +} + + +}; + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif diff --git a/keyboards/planck/keymaps/smt/readme.md b/keyboards/planck/keymaps/smt/readme.md new file mode 100644 index 0000000000..52d702df01 --- /dev/null +++ b/keyboards/planck/keymaps/smt/readme.md @@ -0,0 +1,78 @@ +# smt's Planck keymap + +This keymap is primarily based on the default Planck keymap. + +Notable differences from the default are: + +1. **Dvorak by default** + + I happen to type in Dvorak, and prefer that layer to be the default on my keyboard. This is easy enough to switch around with Qwerty, Colemak, or whatever. + +2. **Right Shift** + + I use both the left and right shift keys when I type. When I want to modify a key with shift, I hold shift with the hand opposite the one typing the key. In the default keymap, Enter is where shift would be on a standard keyboard layout. Oh, muscle memory. + + Thankfully, QMK supports [mod-tap](https://github.com/jackhumbert/qmk_firmware/wiki#fun-with-modifier-keys) keys, and this allows me to set the Enter key to send a modifier (MOD_LSFT) when held, and KC_ENT when tapped. Awesome! + +## Dvorak (default) + +``` +,-----------------------------------------------------------------------------------. +| Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | +|------+------+------+------+------+-------------+------+------+------+------+------| +| Esc | A | O | E | U | I | D | H | T | N | S | - | +|------+------+------+------+------+------|------+------+------+------+------+------| +| Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | +|------+------+------+------+------+------+------+------+------+------+------+------| +| Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | +`-----------------------------------------------------------------------------------' +``` + +## Qwerty (same as default) + +``` +,-----------------------------------------------------------------------------------. +| Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | +|------+------+------+------+------+-------------+------+------+------+------+------| +| Esc | A | S | D | F | G | H | J | K | L | ; | " | +|------+------+------+------+------+------|------+------+------+------+------+------| +| Shift| Z | X | C | V | B | N | M | , | . | / |Enter | +|------+------+------+------+------+------+------+------+------+------+------+------| +| Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | +`-----------------------------------------------------------------------------------' +``` + +## Lower + +This is where I put the number row, a numpad cluster, function keys, and some light navigation via Home/End/PageUp/PageDn. Like the "Raise" layer, the top row is redundant to help with Planck compatibility. + +``` +,-----------------------------------------------------------------------------------. +| ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Del | +|------+------+------+------+------+-------------+------+------+------+------+------| +| | F1 | F2 | F3 | F4 | F5 | F6 | 4 | 5 | 6 | Home |PageUp| +|------+------+------+------+------+------|------+------+------+------+------+------| +| | F7 | F8 | F9 | F10 | F11 | F12 | 1 | 2 | 3 | End |PageDn| +|------+------+------+------+------+------+------+------+------+------+------+------| +| | | | | | | | Next | Vol- | Vol+ | Play | +`-----------------------------------------------------------------------------------' +``` + +## Raise + +As a developer, it makes the most sense for me to group all the commonly-used symbols that don't fit on the main layer. In particular, having the dual-column of parens-braces-brackets really helps a lot. + +I haven't completely filled this layer, which leaves room for future mappings and macros. + +``` +,-----------------------------------------------------------------------------------. +| ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | +|------+------+------+------+------+-------------+------+------+------+------+------| +| | | | | | | _ | ? | + | { | } | | | +|------+------+------+------+------+------|------+------+------+------+------+------| +| | | | | | | - | / | = | [ | ] | \ | +|------+------+------+------+------+------+------+------+------+------+------+------| +| | | | | | | | Next | Vol- | Vol+ | Play | +`-----------------------------------------------------------------------------------' +``` + -- cgit v1.2.3 From 3131d655638927fb1802c6526f7b9b7afff03a5e Mon Sep 17 00:00:00 2001 From: Nic Aitch Date: Thu, 26 Jan 2017 09:31:27 -0600 Subject: Add avrdude target --- keyboards/lets_split/rules.mk | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'keyboards') diff --git a/keyboards/lets_split/rules.mk b/keyboards/lets_split/rules.mk index 1aee5313c1..0dc5491302 100644 --- a/keyboards/lets_split/rules.mk +++ b/keyboards/lets_split/rules.mk @@ -73,3 +73,13 @@ USE_I2C ?= yes SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend CUSTOM_MATRIX = yes + +avrdude: build + ls /dev/tty* > /tmp/1; \ + echo "Reset your Pro Micro then hit any key to continue..."; \ + read -n 1 -s; \ + ls /dev/tty* > /tmp/2; \ + USB=`diff /tmp/1 /tmp/2 | grep '>' | sed -e 's/> //'`; \ + avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex + +.PHONY: avrdude -- cgit v1.2.3 From 890ecf6a2ae1e782cdcd7750572c339c1ad7bb3a Mon Sep 17 00:00:00 2001 From: Nic Aitch Date: Thu, 26 Jan 2017 09:31:40 -0600 Subject: Update readme --- keyboards/lets_split/readme.md | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'keyboards') diff --git a/keyboards/lets_split/readme.md b/keyboards/lets_split/readme.md index 6e296737a2..a63ce59070 100644 --- a/keyboards/lets_split/readme.md +++ b/keyboards/lets_split/readme.md @@ -74,6 +74,10 @@ not be very difficult to adapt it to support more if required. Flashing -------- +From the keymap directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing. + +Example: `make rev2-serial-avrdude` + If you define `EE_HANDS` in your `config.h`, you will need to set the EEPROM for the left and right halves. The EEPROM is used to store whether the half is left handed or right handed. This makes it so that the same firmware -- cgit v1.2.3 From 8c794d73fa75fa2f3f985617a2b566974f3b29bf Mon Sep 17 00:00:00 2001 From: folkert4 Date: Fri, 27 Jan 2017 13:51:39 -0500 Subject: Added Espynn's keymap --- keyboards/planck/keymaps/espynn/Makefile | 63 +++++ .../planck/keymaps/espynn/keyboard-layout.jpg | Bin 0 -> 52908 bytes keyboards/planck/keymaps/espynn/keymap.c | 151 ++++++++++++ keyboards/planck/keymaps/espynn/layout.json | 271 +++++++++++++++++++++ keyboards/planck/keymaps/espynn/readme.md | 18 ++ 5 files changed, 503 insertions(+) create mode 100644 keyboards/planck/keymaps/espynn/Makefile create mode 100644 keyboards/planck/keymaps/espynn/keyboard-layout.jpg create mode 100644 keyboards/planck/keymaps/espynn/keymap.c create mode 100644 keyboards/planck/keymaps/espynn/layout.json create mode 100644 keyboards/planck/keymaps/espynn/readme.md (limited to 'keyboards') diff --git a/keyboards/planck/keymaps/espynn/Makefile b/keyboards/planck/keymaps/espynn/Makefile new file mode 100644 index 0000000000..44a030ba38 --- /dev/null +++ b/keyboards/planck/keymaps/espynn/Makefile @@ -0,0 +1,63 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Build Options +# change to "no" to disable the options, or define them in the makefile.mk in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/planck/keymaps/espynn/keyboard-layout.jpg b/keyboards/planck/keymaps/espynn/keyboard-layout.jpg new file mode 100644 index 0000000000..55e5396bfd Binary files /dev/null and b/keyboards/planck/keymaps/espynn/keyboard-layout.jpg differ diff --git a/keyboards/planck/keymaps/espynn/keymap.c b/keyboards/planck/keymaps/espynn/keymap.c new file mode 100644 index 0000000000..4a3fe32b8c --- /dev/null +++ b/keyboards/planck/keymaps/espynn/keymap.c @@ -0,0 +1,151 @@ +#include "planck.h" +#include "action_layer.h" +#include "eeconfig.h" +#ifdef BACKLIGHT_ENABLE + #include "backlight.h" +#endif +#define PREVENT_STUCK_MODIFIERS +extern keymap_config_t keymap_config; + +// Symbolic names for macro IDs. +#define _QWERTY 0 // QUERTY layer +#define _LOWER 1 // Lower layer +#define _RAISE 2 // Raise layer +#define _CUSTOM 3 // Custom layer (LOWER + RAISE) +#define _BL 4 // Backlight +#define _CUS0 5 // Mobile# +#define _CUS1 6 // signature +#define _CUS2 7 // macro 2 +#define _CUS3 8 // macro 3 +#define _CUS4 9 // macro 4 +#define _CUS5 10 // email +#define _COPY 11 // copy +#define _PASTE 12 // paste +#define _CUT 13 // cut + +// Macro shortcuts. +#define QWERTY M(_LOWER) +#define LOWER M(_LOWER) +#define RAISE M(_RAISE) +#define CUSTOM M(_CUSTOM) +#define BL M(_BL) +#define CUS0 M(_CUS0) +#define CUS1 M(_CUS1) +#define CUS2 M(_CUS2) +#define CUS3 M(_CUS3) +#define CUS4 M(_CUS4) +#define CUS5 M(_CUS5) +#define COPY M(_COPY) +#define PASTE M(_PASTE) +#define CUT M(_CUT) + +// Func macro definitions. +#define LWR_PGDN FUNC(0) // Tap for PgDn, hold for LOWER +#define RSE_PGUP FUNC(1) // Tap for PgUp, hold for RAISE +#define CTL_CAPS FUNC(2) // Tap for Caps, hold for Ctrl (DOESN'T SEEM TO WORK) +#define SFT_ENT FUNC(3) // Tap for Enter, hold for Shift +#define ZM_NRM FUNC(4) // Zoom normal +#define ZM_IN FUNC(5) // Zoom out +#define ZM_OUT FUNC(6) // Zoom in + +// Enable these functions using FUNC(n) macro. +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_TAP_KEY(_LOWER, KC_PGDN), + [1] = ACTION_LAYER_TAP_KEY(_RAISE, KC_PGUP), + [2] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_CAPS), + [3] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT), + [4] = ACTION_MODS_KEY(MOD_LCTL, KC_0), + [5] = ACTION_MODS_KEY(MOD_LCTL, KC_MINS), + [6] = ACTION_MODS_KEY(MOD_LCTL, KC_PLUS), + [7] = ACTION_MODS_KEY(MOD_LCTL, KC_UNDS), + }; + +// This config can be found at Keyboard layout editor site: http://goo.gl/zjXL2l +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_QWERTY] = { /* QWERTY */ + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_DEL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT}, + {KC_LCTL, KC_ESC, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, +[_LOWER] = { /* LOWER */ + {KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LPRN, KC_RPRN, KC_LCBR, KC_RCBR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_QUOT, KC_DQT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, ZM_NRM, ZM_IN, ZM_OUT, KC_TRNS, KC_PGDN, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} +}, +[_RAISE] = { /* RAISE */ + {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LCBR, KC_LCBR, KC_BSLS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, KC_PIPE, KC_GRV, KC_TILD, KC_LBRC, KC_LBRC, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGUP, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, +[_CUSTOM] = { /* CUSTOM */ + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CUS4, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CUS0, CUS3, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, CUT, COPY, PASTE, CUS1, CUS5, CUS2, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {BL, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} +} +}; + +// Set a layer persistantly. +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +// Macro actions for each corresponding ID. +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _RAISE: // Raised layer. + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _CUSTOM); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _CUSTOM); + } + break; + case _LOWER: // Lowered layer. + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _CUSTOM); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _CUSTOM); + } + break; + case _BL: // Backlight + if (record->event.pressed) { + register_code(KC_RSFT); +#ifdef BACKLIGHT_ENABLE + backlight_step(); +#endif + } else { + unregister_code(KC_RSFT); + } + break; + case _CUS0: // enter your mobile# here + return MACRODOWN(T(9), T(9), T(9), T(MINS),T(9), T(9), T(9), T(MINS),T(9), T(9), T(9), T(9),END); + case _CUS1: // signature line for email + return MACRODOWN(T(ENT), T(ENT), T(MINS), T(J), T(W), END); + case _CUS2: // Custom macro 2 + return MACRODOWN( DOWN(KC_LSFT), TYPE(KC_L), UP(KC_LSFT), END ); + case _CUS3: // custom macro 3 + return MACRODOWN( DOWN(KC_LSFT), TYPE(KC_F), UP(KC_LSFT), END ); + case _CUS4: // custom macro 4 + return MACRODOWN( DOWN(KC_LSFT), TYPE(KC_I), UP(KC_LSFT), END ); + case _CUS5: // Enter your email here + return MACRODOWN( TYPE(KC_F), + DOWN(KC_LSFT), TYPE(KC_2), UP(KC_LSFT), + TYPE(KC_G), TYPE(KC_M), TYPE(KC_A), TYPE(KC_I), TYPE(KC_L), TYPE(KC_DOT), TYPE(KC_C), TYPE(KC_O), TYPE(KC_M), END ); + case _CUT: //cut macro + return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_X), UP(KC_LCTL), END ); + case _COPY: // copy macro + return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_C), UP(KC_LCTL), END ); + case _PASTE: // paste macro + return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_V), UP(KC_LCTL), END ); + }; + return MACRO_NONE; +} \ No newline at end of file diff --git a/keyboards/planck/keymaps/espynn/layout.json b/keyboards/planck/keymaps/espynn/layout.json new file mode 100644 index 0000000000..38ccc34529 --- /dev/null +++ b/keyboards/planck/keymaps/espynn/layout.json @@ -0,0 +1,271 @@ +[ + { + "backcolor": "#858585", + "name": "Planck 40%", + "author": "James Folkert", + "background": { + "name": "Aluminium brushed", + "style": "background-image: url('/bg/metal/aluminum_texture1642.jpg');" + }, + "switchMount": "cherry", + "switchBrand": "cherry", + "switchType": "MX1A-A1xx", + "pcb": true, + "plate": true + }, + [ + { + "fa": [ + 2, + 2, + 0, + 2 + ] + }, + "F1\n1\n\n!\n\n\n\n\n\n", + "F2\n2\n\n@\n\n\n\n\n\nQ", + "F3\n3\n\n#\n\n\n\n\n\nW", + "F4\n4\n\n$\n\n\n\n\n\nE", + "F5\n5\n\n%\n\n\n\n\n\nR", + "F6\n6\n\n^\n\n\n\n\n\nT", + "F7\n6\n\n&\n\n\n\n\n\nY", + "F8\n8\n\n*\nMacro4\n\n\n\n\nU", + "F9\n9\n\n(\n\n\n\n\n\nI", + { + "fa": [ + 0, + 0, + 0, + 2 + ] + }, + "F10\n0\n\n)\n\n\n\n\n\nO", + { + "fa": [ + 2, + 2, + 0, + 2 + ] + }, + "F11\n-\n\n_\n\n\n\n\n\nP", + "F12\n=\n\n+\n\n\n\n\n\n" + ], + [ + { + "a": 7, + "f": 3 + }, + "", + { + "f": 3 + }, + "A", + { + "f": 3 + }, + "S", + { + "f": 3 + }, + "D", + { + "t": "#ff0000", + "a": 4, + "f": 3 + }, + "\n(\n\n\n\n\n\n\n\nF", + { + "t": "#000000", + "f": 3 + }, + "\n)\n\n\n\n\n\n\n\nG", + { + "f": 3 + }, + "\n{\n\n\nMacro0\n\n\n\n\nH", + { + "t": "#ff0000", + "f": 3 + }, + "\n}\n\n\nMacro3\n\n\n\n\nJ", + { + "t": "#000000", + "f": 3 + }, + "{\n\n\n\n\n\n\n\n\nK", + { + "f": 3 + }, + "{\n\n\n\n\n\n\n\n\nL", + { + "fa": [ + 2, + 2, + 2, + 2, + 0, + 0, + 0, + 2 + ] + }, + "\\\n\n|\n\n\n\n\n:\n\n;", + { + "a": 7, + "fa": [ + 9 + ] + }, + "" + ], + [ + { + "f": 3 + }, + "Shift", + { + "f": 3 + }, + "Z", + { + "f": 3 + }, + "X\n\n\n\nCut", + { + "f": 3 + }, + "C\n\n\n\nCopy", + { + "a": 4, + "fa": [ + 2, + 2, + 2, + 2 + ] + }, + "\\\n[\n|\n{\nPaste\n\n\n\n\nV", + "|\n]\n\n}\nMacro1\n\n\n\n\nB", + "`\n'\n~\n\"\nMacro5\n\n\n\n\nN", + "~\n\"\n\n\nMacro2\n\n\n\n\nM", + { + "fa": [ + 2, + 2, + 2, + 2, + 0, + 0, + 0, + 1 + ] + }, + "[\n\n{\n\n\n\n\n<\n\n,", + "[\n\n{\n\n\n\n\n\n\n.", + { + "a": 6 + }, + "\n\n?\n\n\n\n\n\n/", + { + "a": 4, + "fa": [ + 2, + 2, + 2, + 0, + 0, + 0, + 0, + 1, + 9, + 0 + ] + }, + "\n\n\nShift\n\n\n\n\n\n\nShift" + ], + [ + { + "a": 7, + "f": 3 + }, + "Ctrl\n\n\n\nBLight", + { + "a": 4, + "fa": [ + 2, + 1, + 2, + 0, + 0, + 0, + 0, + 1, + 9, + 9 + ] + }, + "\nZNorm\n\n\nRESET\n\n\n\n\n", + { + "fa": [ + 2, + 1, + 2, + 0, + 0, + 0, + 0, + 1, + 9, + 6 + ] + }, + "\nZIn\n\n\n\n\n\n\n\n", + { + "fa": [ + 2, + 1, + 2, + 0, + 0, + 0, + 0, + 1, + 9, + 9 + ] + }, + "\nZOut\n\n\n\n\n\n\n\n", + { + "a": 7, + "fa": [ + 9 + ] + }, + "⇓", + { + "a": 4, + "fa": [ + 9, + 5, + 5 + ], + "w": 2 + }, + "\n\n", + { + "a": 7 + }, + "⇑", + { + "a": 4, + "fa": [ + 2 + ] + }, + "\n\n\n\n\n\n\n\n\n←", + "\n\n\n\n\n\n\n\n\n↓", + "\n\n\n\n\n\n\n\n\n↑", + "\n\n\n\n\n\n\n\n\n→" + ] +] \ No newline at end of file diff --git a/keyboards/planck/keymaps/espynn/readme.md b/keyboards/planck/keymaps/espynn/readme.md new file mode 100644 index 0000000000..8882f46011 --- /dev/null +++ b/keyboards/planck/keymaps/espynn/readme.md @@ -0,0 +1,18 @@ +# Espynn's keymap for Planck Ortholinear 40% Mechanical Keyboard +Created by James Folkert: https://twitter.com/trekloFsemaJ +Added several custom functions to the keymap from the "ab" map. Special thanks to "mollat" for demonstration of macros in their keymap.c + + +![Layout](keyboard-layout.png "Practical Keymap") + + +* Online keyboard layout editor: http://www.keyboard-layout-editor.com/ +* [JSON of raw layout] (layout.json "JSON of raw layout") + +# Notes +* Simultaneous RAISE+LOWER enters CUSTOM layer. Several custom keymaps are here +* I disregarded the advice of Jack and used macros for passwords. I accept my fate. These have been abstracted to macros 2, 3, and 4 +* add your mobile and email to the keymap before make +* RAISE and LOWER also acts as PgUp and PgDn when tapped. +* [CapsLock] also acts as [Ctrl] key when you press and hold. It is convenient for GNU Emacs users. (not sure if this works) +* Bracket/ paran/ brace keys are placed in the center of the keyboard for programmer's convenience. \ No newline at end of file -- cgit v1.2.3 From 321904b8e38e35e7db8a19488ee96456f6393672 Mon Sep 17 00:00:00 2001 From: Stephen Tudor Date: Sat, 28 Jan 2017 01:37:59 -0500 Subject: Improve Planck keymap - added escape+shift mod-tap key - replaced BRITE with backtick --- keyboards/planck/keymaps/smt/keymap.c | 15 ++++++--------- keyboards/planck/keymaps/smt/readme.md | 29 +++++++++++++++++++++++++++-- 2 files changed, 33 insertions(+), 11 deletions(-) (limited to 'keyboards') diff --git a/keyboards/planck/keymaps/smt/keymap.c b/keyboards/planck/keymaps/smt/keymap.c index 47e9d8c707..51e5a40bfe 100644 --- a/keyboards/planck/keymaps/smt/keymap.c +++ b/keyboards/planck/keymaps/smt/keymap.c @@ -1,6 +1,3 @@ -// This is the canonical layout file for the Quantum project. If you want to add another keyboard, -// this is the style you want to emulate. - #include "planck.h" #include "action_layer.h" #ifdef AUDIO_ENABLE @@ -42,14 +39,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+------|------+------+------+------+------+------| * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * | ` | Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | * `-----------------------------------------------------------------------------------' */ [_DVORAK] = { - {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, - {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS}, - {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_T(KC_ENT)}, - {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, + {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS}, + {SFT_T(KC_ESC), KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_T(KC_ENT)}, + {ALL_T(KC_GRV), KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} }, /* Qwerty @@ -60,7 +57,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+------|------+------+------+------+------+------| * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * | ` | Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | * `-----------------------------------------------------------------------------------' */ [_QWERTY] = { diff --git a/keyboards/planck/keymaps/smt/readme.md b/keyboards/planck/keymaps/smt/readme.md index 52d702df01..0e955a5742 100644 --- a/keyboards/planck/keymaps/smt/readme.md +++ b/keyboards/planck/keymaps/smt/readme.md @@ -14,6 +14,16 @@ Notable differences from the default are: Thankfully, QMK supports [mod-tap](https://github.com/jackhumbert/qmk_firmware/wiki#fun-with-modifier-keys) keys, and this allows me to set the Enter key to send a modifier (MOD_LSFT) when held, and KC_ENT when tapped. Awesome! +3. Escape + + I am experimenting with using Left Shift as a mod-tap key for Escape, similar to how I use the Enter key. It's set up like this on my Minivan, so in the interest of consistency... + +4. Backtick + + I don't currently have LEDs on any of my keyboards, and even if I did, I don't think I would want their controls on a base layer. + + So, why use backtick in the lower left corner? I use it as my tmux prefix key, so I need to type it more frequently than most people. Putting it on the base layer works well for me. + ## Dvorak (default) ``` @@ -24,7 +34,7 @@ Notable differences from the default are: |------+------+------+------+------+------|------+------+------+------+------+------| | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | |------+------+------+------+------+------+------+------+------+------+------+------| -| Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | +| ` | Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | `-----------------------------------------------------------------------------------' ``` @@ -38,7 +48,7 @@ Notable differences from the default are: |------+------+------+------+------+------|------+------+------+------+------+------| | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | |------+------+------+------+------+------+------+------+------+------+------+------| -| Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | +| ` | Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | `-----------------------------------------------------------------------------------' ``` @@ -76,3 +86,18 @@ I haven't completely filled this layer, which leaves room for future mappings an `-----------------------------------------------------------------------------------' ``` +## Adjust (Lower + Raise) + +Utility layer. This is where I'd switch to Qwerty, or ~~fool around with~~ adjust the audio/music settings. + +``` +,-----------------------------------------------------------------------------------. +| | Reset| | | | | | | | | | Del | +|------+------+------+------+------+-------------+------+------+------+------+------| +| | | |Aud on|AudOff|AGnorm|AGswap|Dvorak|Qwerty| | | | +|------+------+------+------+------+------|------+------+------+------+------+------| +| |Voice-|Voice+|Mus on|MusOff|MidiOn|MidOff| | | | | | +|------+------+------+------+------+------+------+------+------+------+------+------| +| | | | | | | | | | | | +`-----------------------------------------------------------------------------------' +``` -- cgit v1.2.3 From 7c24ecf580471f7b0d360dd115d6730adf6e59d8 Mon Sep 17 00:00:00 2001 From: Stephen Tudor Date: Sat, 28 Jan 2017 01:38:58 -0500 Subject: Carry over Planck updates to my Preonic keymap --- keyboards/preonic/keymaps/smt/keymap.c | 30 +++++++++++------------ keyboards/preonic/keymaps/smt/readme.md | 42 +++++++++++++++++++++++++++------ 2 files changed, 50 insertions(+), 22 deletions(-) (limited to 'keyboards') diff --git a/keyboards/preonic/keymaps/smt/keymap.c b/keyboards/preonic/keymaps/smt/keymap.c index 5465d543a4..ba05d9ad53 100644 --- a/keyboards/preonic/keymaps/smt/keymap.c +++ b/keyboards/preonic/keymaps/smt/keymap.c @@ -1,9 +1,9 @@ #include "preonic.h" #include "action_layer.h" -#include "eeconfig.h" #ifdef AUDIO_ENABLE #include "audio.h" #endif +#include "eeconfig.h" // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. @@ -33,39 +33,39 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ,-----------------------------------------------------------------------------------. * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Tab | " | , | . | P | Y | F | G | C | R | L | / | + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | * |------+------+------+------+------+-------------+------+------+------+------+------| * | Esc | A | O | E | U | I | D | H | T | N | S | - | * |------+------+------+------+------+------|------+------+------+------+------+------| * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * | ` | Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | * `-----------------------------------------------------------------------------------' */ [_DVORAK] = { - {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, - {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH}, - {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS}, - {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_T(KC_ENT)}, - {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, + {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS}, + {SFT_T(KC_ESC), KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_T(KC_ENT)}, + {ALL_T(KC_GRV), KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} }, /* Qwerty * ,-----------------------------------------------------------------------------------. * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Tab | Q | W | E | R | T | Y | U | I | O | P | Del | + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | * |------+------+------+------+------+-------------+------+------+------+------+------| * | Esc | A | S | D | F | G | H | J | K | L | ; | " | * |------+------+------+------+------+------|------+------+------+------+------+------| * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * | ` | Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | * `-----------------------------------------------------------------------------------' */ [_QWERTY] = { {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, - {_______, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL}, + {_______, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, _______}, {_______, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, {_______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______}, {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} @@ -98,9 +98,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+-------------+------+------+------+------+------| * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | | | | | | _ | + | { | } | | | + * | | | | | | | _ | ? | + | { | } | | | * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | | | | | | | - | = | [ | ] | \ | + * | | | | | | | - | / | = | [ | ] | \ | * |------+------+------+------+------+------+------+------+------+------+------+------| * | | | | | | | | Next | Vol- | Vol+ | Play | * `-----------------------------------------------------------------------------------' @@ -108,8 +108,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_RAISE] = { {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL}, {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL}, - {_______, _______, _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, - {_______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {_______, _______, _______, _______, _______, _______, KC_UNDS, KC_QUES, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {_______, _______, _______, _______, _______, _______, KC_MINS, KC_SLSH, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, diff --git a/keyboards/preonic/keymaps/smt/readme.md b/keyboards/preonic/keymaps/smt/readme.md index 2dcc1927ff..393d9d3e3a 100644 --- a/keyboards/preonic/keymaps/smt/readme.md +++ b/keyboards/preonic/keymaps/smt/readme.md @@ -12,7 +12,17 @@ Notable differences from the default are: I use both the left and right shift keys when I type. When I want to modify a key with shift, I hold shift with the hand opposite the one typing the key. In the default keymap, Enter is where shift would be on a standard keyboard layout. Oh, muscle memory. - Thankfully, QMK supports [mod-tap](https://github.com/qmk/qmk_firmware/wiki#fun-with-modifier-keys) keys, and this allows me to set the Enter key to send a modifier (MOD_LSFT) when held, and KC_ENT when tapped. Awesome! + Thankfully, QMK supports [mod-tap](https://github.com/jackhumbert/qmk_firmware/wiki#fun-with-modifier-keys) keys, and this allows me to set the Enter key to send a modifier (MOD_LSFT) when held, and KC_ENT when tapped. Awesome! + +3. Escape + + I am experimenting with using Left Shift as a mod-tap key for Escape, similar to how I use the Enter key. It's set up like this on my Minivan, so in the interest of consistency... + +4. Backtick + + I don't currently have LEDs on any of my keyboards, and even if I did, I don't think I would want their controls on a base layer. + + So, why use backtick in the lower left corner? I use it as my tmux prefix key, so I need to type it more frequently than most people. Putting it on the base layer works well for me. ## Dvorak (default) @@ -20,13 +30,13 @@ Notable differences from the default are: ,-----------------------------------------------------------------------------------. | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | |------+------+------+------+------+------+------+------+------+------+------+------| -| Tab | " | , | . | P | Y | F | G | C | R | L | / | +| Tab | " | , | . | P | Y | F | G | C | R | L | Bkps | |------+------+------+------+------+-------------+------+------+------+------+------| | Esc | A | O | E | U | I | D | H | T | N | S | - | |------+------+------+------+------+------|------+------+------+------+------+------| | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | |------+------+------+------+------+------+------+------+------+------+------+------| -| Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | +| ` | Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | `-----------------------------------------------------------------------------------' ``` @@ -36,13 +46,13 @@ Notable differences from the default are: ,-----------------------------------------------------------------------------------. | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | |------+------+------+------+------+------+------+------+------+------+------+------| -| Tab | Q | W | E | R | T | Y | U | I | O | P | Del | +| Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | |------+------+------+------+------+-------------+------+------+------+------+------| | Esc | A | S | D | F | G | H | J | K | L | ; | " | |------+------+------+------+------+------|------+------+------+------+------+------| | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | |------+------+------+------+------+------+------+------+------+------+------+------| -| Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | +| ` | Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | `-----------------------------------------------------------------------------------' ``` @@ -76,10 +86,28 @@ I haven't completely filled this layer, which leaves room for future mappings an |------+------+------+------+------+-------------+------+------+------+------+------| | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | |------+------+------+------+------+-------------+------+------+------+------+------| -| | | | | | | | _ | + | { | } | | | +| | | | | | | _ | ? | + | { | } | | | |------+------+------+------+------+------|------+------+------+------+------+------| -| | | | | | | | - | = | [ | ] | \ | +| | | | | | | - | / | = | [ | ] | \ | |------+------+------+------+------+------+------+------+------+------+------+------| | | | | | | | | Next | Vol- | Vol+ | Play | `-----------------------------------------------------------------------------------' ``` + +## Adjust (Lower + Raise) + +Utility layer. This is where I'd switch to Qwerty, or ~~fool around with~~ adjust the audio/music settings. + +``` +,-----------------------------------------------------------------------------------. +| F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | +|------+------+------+------+------+------+------+------+------+------+------+------| +| | Reset| | | | | | | | | | Del | +|------+------+------+------+------+-------------+------+------+------+------+------| +| | | |Aud on|AudOff|AGnorm|AGswap|Dvorak|Qwerty| | | | +|------+------+------+------+------+------|------+------+------+------+------+------| +| |Voice-|Voice+|Mus on|MusOff|MidiOn|MidOff| | | | | | +|------+------+------+------+------+------+------+------+------+------+------+------| +| | | | | | | | | | | | +`-----------------------------------------------------------------------------------' +``` -- cgit v1.2.3 From 77e54e34e129a03e58c128171a7188978ec908b4 Mon Sep 17 00:00:00 2001 From: Luke Silva Date: Sat, 28 Jan 2017 18:43:41 +1100 Subject: Add luke keymap, as an example of the tapping macros --- keyboards/planck/keymaps/luke/Makefile | 25 +++ keyboards/planck/keymaps/luke/keymap.c | 355 ++++++++++++++++++++++++++++++++ keyboards/planck/keymaps/luke/readme.md | 2 + 3 files changed, 382 insertions(+) create mode 100644 keyboards/planck/keymaps/luke/Makefile create mode 100644 keyboards/planck/keymaps/luke/keymap.c create mode 100644 keyboards/planck/keymaps/luke/readme.md (limited to 'keyboards') diff --git a/keyboards/planck/keymaps/luke/Makefile b/keyboards/planck/keymaps/luke/Makefile new file mode 100644 index 0000000000..847686873d --- /dev/null +++ b/keyboards/planck/keymaps/luke/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = yes # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/planck/keymaps/luke/keymap.c b/keyboards/planck/keymaps/luke/keymap.c new file mode 100644 index 0000000000..26dcb451b1 --- /dev/null +++ b/keyboards/planck/keymaps/luke/keymap.c @@ -0,0 +1,355 @@ +/* + * A keyboard layout for the gridded planck. + * + * Copyright (C) 2017 Luke Silva + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * ,-----------------------------------------------------------------------------------. + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + * + * This layout uses colemak by default, and is designed for programming, with easy access to symbols + * through either double purpose modifiers or colemak style rolling for commonly used symbol clusters + * Eg: compare colemak 'this' to '(){\n}' on the symbol layer. + * + * The layout also supports a range of multilingual characters, covering those + * needed for French, German, Swedish and likely some other European Languages. + * In the future full support for Colemak's multilingual deadkeys may be introduced. + * + * The multilingual characters are inputted through QMK's unicode engine, using + * the Linux input method by default, however this can be changed at runtime. + * + */ + + +#include "planck.h" + +#define _______ KC_TRNS +#define XXXXXXX KC_NO + + +// Layers +#define _COLEMAK 0 +#define _QWERTY 1 +#define _SYM 2 +#define _NUM 3 +#define _GR 4 +#define _GR_S 5 +#define _ADJ 6 +#define _NAV 7 +#define _PLOVER 8 + +// Macro ID numbers +#define M_ALT_HASH 1 +#define M_GR_DASH 2 +#define M_SYM_LPRN 3 +#define M_NAV_UNDS 4 +#define M_NUM_RPRN 5 +#define M_CTRL_DLR 6 +#define M_LCBR_ENT 7 +#define M_PLOVER 8 +#define M_EXT_PLV 9 +#define M_WINDOWS 10 +#define M_LINUX 11 +#define M_OSX 12 +#define M_FUNCTION 13 +#define M_THEN 14 +#define M_CATCH 15 + +// Macro keys +#define ALT_HASH MACROTAP(M_ALT_HASH) // tap for #, hold for Alt +#define GR_DASH MACROTAP(M_GR_DASH) // tap for -, hold for GR layer a-class-name +#define SYM_LPRN MACROTAP(M_SYM_LPRN) // tap for (, hold for symbols layer if() +#define NAV_UNDS MACROTAP(M_NAV_UNDS) // tap for _, hold for navigation layer snake_case_variable +#define NUM_RPRN MACROTAP(M_NUM_RPRN) // tap for ), hold for numbers layer else if() +#define CTRL_DLR MACROTAP(M_CTRL_DLR) // tap for $, hold for ctrl $php_is_really_weird +#define LCBR_ENT M(M_LCBR_ENT) // {\n easier code formatting +#define PLOVER M(M_PLOVER) // PHROPB (plover) or ERFVIK(qwerty) starts plover +#define EXT_PLV M(M_EXT_PLV) // PHRO*F (plover) or ERFVYU(qwerty) stops plover +#define WINDOWS M(M_WINDOWS) // Sets Unicode handler to windows +#define LINUX M(M_LINUX) // Sets Unicode handler to linux +#define OSX M(M_OSX) // Sets Unicode handler to OSX +#define FUNCTION M(M_FUNCTION) +#define THEN M(M_THEN) +#define CATCH M(M_CATCH) + + +// Renames of QMK keys... (would have otherwise been a macro) +#define QWERTY DF(_QWERTY) +#define COLEMAK DF(_COLEMAK) + + + + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ;: | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Bksp | A | R | S | T | D | H | N | E | I | O | '" | + * |------+------+------+------+------+------+------+------+------+------+------+------`---. + * |Shift=| Z | X | C | V | B | K | M | ,< | .> | /? |Shift/Ent | + * |------+------+------+------+------+------+------+------+------+------+------+----------| + * |CtCaps|GUIF4 | Alt# | Gr- | Sym( | Nav_ |Space | Num) |Ctrl$ | F11 | F12 |Nav toggle| + * `---------------------------------------------------------------------------------------' + */ + +[_COLEMAK] = { + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {SFT_T(KC_EQL), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_ENT) }, + {CTL_T(KC_CAPS), KC_LGUI, ALT_HASH, GR_DASH, SYM_LPRN, NAV_UNDS, KC_SPC, NUM_RPRN, CTRL_DLR, KC_F11, KC_F12, TG(_NAV)} +}, + + + +/* QWERTY + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Bksp | A | S | D | F | G | H | J | K | L | ;: | '" | + * |------+------+------+------+------+------+------+------+------+------+------+------`---. + * |Shift=| Z | X | C | V | B | N | M | ,< | .> | /? |Shift/Ent | + * |------+------+------+------+------+------+------+------+------+------+------+----------| + * |CtCaps|GUIF4 | Alt# | Gr- | Sym( | Nav_ |Space | Num) |Ctrl$ | F11 | F12 |Nav toggle| + * `---------------------------------------------------------------------------------------' + */ + +[_QWERTY] = { + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_ENT) }, + {CTL_T(KC_CAPS), KC_LGUI, KC_LALT, GR_DASH, SYM_LPRN,KC_SPC, KC_SPC, NUM_RPRN, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT} +}, + + +/* Symbols + * ,-----------------------------------------------------------------------------------. + * | Tab | ` | @ | / | * | ^ | % | : | + | - | Del | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | [ | ; | } | ( | " | ' | ) | {\n | ! | ] | \ | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Shift | . | { | < | > | ~ | X2 | = | & | | | ? |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | Sym | _ |Space | NUM | X2 | | | | + * `-----------------------------------------------------------------------------------' + */ + +[_SYM] = { + {KC_TAB, KC_GRV, KC_AT, KC_SLSH, KC_ASTR, KC_CIRC, KC_PERC, KC_COLN, KC_PLUS, KC_MINS, KC_DEL, KC_BSPC}, + {FUNCTION,KC_LBRC, KC_SCLN, KC_RCBR, KC_LPRN, KC_DQT, KC_QUOT, KC_RPRN, LCBR_ENT,KC_EXLM, KC_RBRC, KC_BSLS}, + {KC_LSFT, KC_DOT, KC_LCBR, KC_LABK, KC_RABK, KC_TILD, _______, KC_EQL, KC_AMPR, KC_PIPE, KC_QUES, KC_ENT }, + {THEN, CATCH, XXXXXXX, XXXXXXX, _______, _______, _______,