From aa1a90af66df6ab12a371416e23094315c4a43b3 Mon Sep 17 00:00:00 2001
From: Felix Uhl <felix.uhl@outlook.de>
Date: Thu, 11 Aug 2016 00:54:55 +0200
Subject: Added S60-X to keyboards with two layouts.

---
 keyboards/s60-x/Makefile                  |  75 ++++++++++++++
 keyboards/s60-x/config.h                  | 164 ++++++++++++++++++++++++++++++
 keyboards/s60-x/keymaps/default/Makefile  |  21 ++++
 keyboards/s60-x/keymaps/default/keymap.c  |  92 +++++++++++++++++
 keyboards/s60-x/keymaps/default/readme.md |   1 +
 keyboards/s60-x/keymaps/felix/Makefile    |  21 ++++
 keyboards/s60-x/keymaps/felix/keymap.c    | 110 ++++++++++++++++++++
 keyboards/s60-x/keymaps/felix/readme.md   |   1 +
 keyboards/s60-x/readme.md                 |  32 ++++++
 keyboards/s60-x/s60-x.c                   |  28 +++++
 keyboards/s60-x/s60-x.h                   |  44 ++++++++
 11 files changed, 589 insertions(+)
 create mode 100644 keyboards/s60-x/Makefile
 create mode 100644 keyboards/s60-x/config.h
 create mode 100644 keyboards/s60-x/keymaps/default/Makefile
 create mode 100644 keyboards/s60-x/keymaps/default/keymap.c
 create mode 100644 keyboards/s60-x/keymaps/default/readme.md
 create mode 100644 keyboards/s60-x/keymaps/felix/Makefile
 create mode 100644 keyboards/s60-x/keymaps/felix/keymap.c
 create mode 100644 keyboards/s60-x/keymaps/felix/readme.md
 create mode 100644 keyboards/s60-x/readme.md
 create mode 100644 keyboards/s60-x/s60-x.c
 create mode 100644 keyboards/s60-x/s60-x.h

(limited to 'keyboards')

diff --git a/keyboards/s60-x/Makefile b/keyboards/s60-x/Makefile
new file mode 100644
index 0000000000..57edd5e036
--- /dev/null
+++ b/keyboards/s60-x/Makefile
@@ -0,0 +1,75 @@
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no            # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
+
+ifndef QUANTUM_DIR
+	include ../../Makefile
+endif
+
+
diff --git a/keyboards/s60-x/config.h b/keyboards/s60-x/config.h
new file mode 100644
index 0000000000..d548a99b33
--- /dev/null
+++ b/keyboards/s60-x/config.h
@@ -0,0 +1,164 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2016 Julien Pecqueur <julien@peclu.net>
+Copyright 2016 Felix Uhl <ifreilicht@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Massdrop
+#define PRODUCT         S60-X
+#define DESCRIPTION     q.m.k. keyboard firmware for S60-X
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B7, B3, B2, B1, B0 }
+#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, E6, F1 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+ 
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+#define NO_ACTION_ONESHOT
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/s60-x/keymaps/default/Makefile b/keyboards/s60-x/keymaps/default/Makefile
new file mode 100644
index 0000000000..f4671a9d11
--- /dev/null
+++ b/keyboards/s60-x/keymaps/default/Makefile
@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/s60-x/keymaps/default/keymap.c b/keyboards/s60-x/keymaps/default/keymap.c
new file mode 100644
index 0000000000..aa2856525c
--- /dev/null
+++ b/keyboards/s60-x/keymaps/default/keymap.c
@@ -0,0 +1,92 @@
+/*
+Copyright 2016 Julien Pecqueur <julien@peclu.net>
+Copyright 2016 Felix Uhl <ifreilicht@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "s60-x.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	/* Layout 0: Default Layer
+	* ,-----------------------------------------------------------.
+	* |`  |  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
+	* |-----------------------------------------------------------|
+	* |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
+	* |-----------------------------------------------------------|
+	* |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
+	* |-----------------------------------------------------------|
+	* |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |
+	* |-----------------------------------------------------------|
+	* |Fn1 |Gui |Alt |        SpaceFn         |Alt |Gui |App |Ctrl|
+	* `-----------------------------------------------------------'
+	*/
+	KEYMAP(
+		GRV,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    MINS, EQL,  NO,   BSPC, \
+		TAB,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    LBRC, RBRC, BSLS, \
+		LCTL, A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, QUOT, NO,   ENT,  \
+		LSFT, NO,   Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH, NO,   RSFT, NO, \
+		FN1,  LGUI, LALT,             FN0,                          RALT, RGUI, APP,  RCTL),
+
+	/* Layout 1: Function Layer
+	* ,-----------------------------------------------------------.
+	* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
+	* |-----------------------------------------------------------|
+	* |     |Prv|Ply|Nxt|Stp|   |   |PUp|Up |PDn|   |Slk|Pau|Ins  |
+	* |-----------------------------------------------------------|
+	* |      |Vl-|Mut|Vl+|   |   |Hom|Lef|Dow|Rig|End|   |PEnt    |
+	* |-----------------------------------------------------------|
+	* |        |Prt|Cut|Cop|Pst|Cal|   |   |   |   |   |CapsLock  |
+	* |-----------------------------------------------------------|
+	* |    |    |    |                        |    |    |    |    |
+	* `-----------------------------------------------------------'
+	*/
+	KEYMAP(
+		ESC,  F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,   F10,  F11,  F12,  TRNS, DEL,  \
+		TRNS, MPRV, MPLY, MNXT, MSTP, TRNS, TRNS, PGUP, UP,   PGDN, TRNS, SLCK, PAUS, INS,  \
+		TRNS, VOLD, MUTE, VOLU, TRNS, TRNS, HOME, LEFT, DOWN, RGHT, END,  TRNS, TRNS, PENT, \
+		TRNS, TRNS, PSCR, FN2,  FN3,  FN4,  CALC, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CAPS, TRNS, \
+		TRNS, TRNS, TRNS,             TRNS,                         TRNS, TRNS, TRNS, TRNS),
+};
+
+/*
+* Fn action definition
+*/
+const uint16_t PROGMEM fn_actions[] = {
+	[0] = ACTION_LAYER_TAP_KEY(1, KC_SPACE),    /* SpaceFn layout 1 */
+	[1] = ACTION_LAYER_MOMENTARY(1),            /* Momentary layout 1 */
+	[2] = ACTION_MODS_KEY(MOD_LSFT, KC_DEL),    /* Cut  */
+	[3] = ACTION_MODS_KEY(MOD_LCTL, KC_INS),    /* Copy  */
+	[4] = ACTION_MODS_KEY(MOD_LSFT, KC_INS),    /* Paste */
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
\ No newline at end of file
diff --git a/keyboards/s60-x/keymaps/default/readme.md b/keyboards/s60-x/keymaps/default/readme.md
new file mode 100644
index 0000000000..73318dad72
--- /dev/null
+++ b/keyboards/s60-x/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for s60-x
\ No newline at end of file
diff --git a/keyboards/s60-x/keymaps/felix/Makefile b/keyboards/s60-x/keymaps/felix/Makefile
new file mode 100644
index 0000000000..251e4631d3
--- /dev/null
+++ b/keyboards/s60-x/keymaps/felix/Makefile
@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = yes       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/s60-x/keymaps/felix/keymap.c b/keyboards/s60-x/keymaps/felix/keymap.c
new file mode 100644
index 0000000000..a5ff1ae4d9
--- /dev/null
+++ b/keyboards/s60-x/keymaps/felix/keymap.c
@@ -0,0 +1,110 @@
+/*
+Copyright 2016 Julien Pecqueur <julien@peclu.net>
+Copyright 2016 Felix Uhl <ifreilicht@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "s60-x.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	/* Layout 0: Default Layer
+	* ,-----------------------------------------------------------.
+	* |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|Del|
+	* |-----------------------------------------------------------|
+	* |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|BckSp|
+	* |-----------------------------------------------------------|
+	* |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
+	* |-----------------------------------------------------------|
+	* |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /| Up  |Fn1 |
+	* |-----------------------------------------------------------|
+	* |Fn2 |Gui |Alt |        SpaceFn        |Alt |Left|Down|Right|
+	* `-----------------------------------------------------------'
+	*/
+	KEYMAP(
+		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL, \
+		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,         \
+		KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NO,   KC_ENT,          \
+		KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_NO,   KC_UP,   KC_FN1, \
+		KC_FN2,  KC_LGUI, KC_LALT,                   KC_FN0,                             KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT),
+
+	/* Layout 1: Gaming Layer, SpaceFn disabled
+	* ,-----------------------------------------------------------.
+	* |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |
+	* |-----------------------------------------------------------|
+	* |     |   |   |   |   |   |   |   |   |   |   |   |   |     |
+	* |-----------------------------------------------------------|
+	* |      |   |   |   |   |   |   |   |   |   |   |   |        |
+	* |-----------------------------------------------------------|
+	* |        |   |   |   |   |   |   |   |   |   |   |     |Fn1 |
+	* |-----------------------------------------------------------|
+	* |   | NOP|     |          Space         |    |    |    |    |
+	* `-----------------------------------------------------------'
+	*/
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          \
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          \
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_FN1,  \
+		KC_TRNS, KC_NO,   KC_TRNS,                   KC_SPC,                             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	/* Layout 2: Function Layer
+	* ,-----------------------------------------------------------.
+	* |`  | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|   |RES|
+	* |-----------------------------------------------------------|
+	* |     |Prv|Ply|Nxt|Stp|   |   |PUp|Up |PDn|   |Slk|Pau|Ins  |
+	* |-----------------------------------------------------------|
+	* |      |Vl-|Mut|Vl+|   |   |Hom|Lef|Dow|Rig|End|   |PEnt    |
+	* |-----------------------------------------------------------|
+	* |        |Prt|   |   |   |Cal|   |   |   |   |Pau |PUp |Rsft|
+	* |-----------------------------------------------------------|
+	* |    |    |    |                        |    |Home|PDn |End |
+	* `-----------------------------------------------------------'
+	*/
+	KEYMAP(
+		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  DEBUG,   RESET,   \
+		KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_MSTP, KC_TRNS, KC_TRNS, KC_PGUP, KC_UP,   KC_PGDN, KC_TRNS, KC_SLCK, KC_PAUS, KC_INS,           \
+		KC_TRNS, KC_VOLD, KC_MUTE, KC_VOLU, KC_TRNS, KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,  KC_TRNS, KC_TRNS, KC_PENT,          \
+		KC_TRNS, KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAUS, KC_PGUP, KC_RSFT, \
+		KC_TRNS, KC_TRNS, KC_TRNS,             KC_TRNS,                         KC_TRNS, KC_HOME, KC_PGDN, KC_END),
+};
+
+/*
+* Fn action definition
+*/
+const uint16_t PROGMEM fn_actions[] = {
+	[0] = ACTION_LAYER_TAP_KEY(2, KC_SPACE),    /* SpaceFn layout 1 */
+	[1] = ACTION_LAYER_TOGGLE(1),                /* Disable SpaceFn  */
+	[2] = ACTION_LAYER_MOMENTARY(2)             /* SpaceFn layout 1 */
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
\ No newline at end of file
diff --git a/keyboards/s60-x/keymaps/felix/readme.md b/keyboards/s60-x/keymaps/felix/readme.md
new file mode 100644
index 0000000000..73318dad72
--- /dev/null
+++ b/keyboards/s60-x/keymaps/felix/readme.md
@@ -0,0 +1 @@
+# The default keymap for s60-x
\ No newline at end of file
diff --git a/keyboards/s60-x/readme.md b/keyboards/s60-x/readme.md
new file mode 100644
index 0000000000..34c48b0b7d
--- /dev/null
+++ b/keyboards/s60-x/readme.md
@@ -0,0 +1,32 @@
+S60-x keyboard firmware
+======================
+DIY compact keyboard by Massdrop. This is a port from TMK to QMK based on the [original S60-X Repo](https://github.com/jpec/s60x).
+
+## S60X Resources
+- [Massdrop page](https://www.massdrop.com/buy/sentraq-60-diy-keyboard-kit)
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/s60-x folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+
+To build with the default keymap, simply run `make`.
+
+### Other Keymaps
+
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with `keymap` option like:
+
+```
+$ make keymap=[default|<name>]
+```
+
+Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
\ No newline at end of file
diff --git a/keyboards/s60-x/s60-x.c b/keyboards/s60-x/s60-x.c
new file mode 100644
index 0000000000..417358140c
--- /dev/null
+++ b/keyboards/s60-x/s60-x.c
@@ -0,0 +1,28 @@
+#include "s60-x.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
diff --git a/keyboards/s60-x/s60-x.h b/keyboards/s60-x/s60-x.h
new file mode 100644
index 0000000000..714de30db8
--- /dev/null
+++ b/keyboards/s60-x/s60-x.h
@@ -0,0 +1,44 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Vinνcius Nery Cordeiro <vinicius.nery.cordeiro@gmail.com>
+Copyright 2016 Felix Uhl <ifreilicht@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef S60X_H
+#define S60X_H
+
+#include "quantum.h"
+
+/* S60-X keymap definition macro
+* K2C, K31 and  K3C are extra keys for ISO
+* K0D is extra key from split backspace, K3E is extra key from split right shift
+*/
+
+#define KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
+    K40, K41, K42,                K46,                K4A, K4B, K4C, K4D       \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   KC_NO    }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   K2D,   KC_NO    }, \
+    { K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E }, \
+    { K40,   K41,   K42,   KC_NO, KC_NO, KC_NO, K46,   KC_NO, KC_NO, KC_NO, K4A,   K4B,   K4C,   K4D,   KC_NO    }  \
+}
+
+#endif
-- 
cgit v1.2.3


From 38766dbc82cd0765cd88a47bb88b57d58b4b6723 Mon Sep 17 00:00:00 2001
From: Felix Uhl <felix.uhl@outlook.de>
Date: Thu, 11 Aug 2016 09:36:37 +0200
Subject: Minor changes to keymaps Clarified extra keys Made ISO-keys non-dead
 in default layout Added non-US backslash on felix layout

---
 keyboards/s60-x/keymaps/default/keymap.c | 6 +++---
 keyboards/s60-x/keymaps/felix/keymap.c   | 8 ++++----
 keyboards/s60-x/s60-x.h                  | 7 +++++--
 3 files changed, 12 insertions(+), 9 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/s60-x/keymaps/default/keymap.c b/keyboards/s60-x/keymaps/default/keymap.c
index aa2856525c..3b680c3072 100644
--- a/keyboards/s60-x/keymaps/default/keymap.c
+++ b/keyboards/s60-x/keymaps/default/keymap.c
@@ -31,10 +31,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	* `-----------------------------------------------------------'
 	*/
 	KEYMAP(
-		GRV,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    MINS, EQL,  NO,   BSPC, \
+		GRV,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    MINS,  EQL, BSPC, BSPC, \
 		TAB,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    LBRC, RBRC, BSLS, \
-		LCTL, A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, QUOT, NO,   ENT,  \
-		LSFT, NO,   Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH, NO,   RSFT, NO, \
+		LCTL, A,    S,    D,    F,    G,    H,    J,    K,    L, SCLN,    QUOT, NUHS, ENT,  \
+		LSFT, NUBS, Z,    X,    C,    V,    B,    N,    M, COMM,  DOT,    SLSH,   NO, RSFT, NO, \
 		FN1,  LGUI, LALT,             FN0,                          RALT, RGUI, APP,  RCTL),
 
 	/* Layout 1: Function Layer
diff --git a/keyboards/s60-x/keymaps/felix/keymap.c b/keyboards/s60-x/keymaps/felix/keymap.c
index a5ff1ae4d9..3052dd8160 100644
--- a/keyboards/s60-x/keymaps/felix/keymap.c
+++ b/keyboards/s60-x/keymaps/felix/keymap.c
@@ -25,7 +25,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	* |-----------------------------------------------------------|
 	* |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
 	* |-----------------------------------------------------------|
-	* |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /| Up  |Fn1 |
+	* |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /| Up  | <> |
 	* |-----------------------------------------------------------|
 	* |Fn2 |Gui |Alt |        SpaceFn        |Alt |Left|Down|Right|
 	* `-----------------------------------------------------------'
@@ -34,7 +34,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL, \
 		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,         \
 		KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NO,   KC_ENT,          \
-		KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_NO,   KC_UP,   KC_FN1, \
+		KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_NO,   KC_UP,  KC_NUBS, \
 		KC_FN2,  KC_LGUI, KC_LALT,                   KC_FN0,                             KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT),
 
 	/* Layout 1: Gaming Layer, SpaceFn disabled
@@ -65,7 +65,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	* |-----------------------------------------------------------|
 	* |      |Vl-|Mut|Vl+|   |   |Hom|Lef|Dow|Rig|End|   |PEnt    |
 	* |-----------------------------------------------------------|
-	* |        |Prt|   |   |   |Cal|   |   |   |   |Pau |PUp |Rsft|
+	* |        |Prt|   |   |   |Cal|   |   |   |   |Pau |PUp |Fn1 |
 	* |-----------------------------------------------------------|
 	* |    |    |    |                        |    |Home|PDn |End |
 	* `-----------------------------------------------------------'
@@ -74,7 +74,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  DEBUG,   RESET,   \
 		KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_MSTP, KC_TRNS, KC_TRNS, KC_PGUP, KC_UP,   KC_PGDN, KC_TRNS, KC_SLCK, KC_PAUS, KC_INS,           \
 		KC_TRNS, KC_VOLD, KC_MUTE, KC_VOLU, KC_TRNS, KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,  KC_TRNS, KC_TRNS, KC_PENT,          \
-		KC_TRNS, KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAUS, KC_PGUP, KC_RSFT, \
+		KC_TRNS, KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAUS, KC_PGUP, KC_FN1,  \
 		KC_TRNS, KC_TRNS, KC_TRNS,             KC_TRNS,                         KC_TRNS, KC_HOME, KC_PGDN, KC_END),
 };
 
diff --git a/keyboards/s60-x/s60-x.h b/keyboards/s60-x/s60-x.h
index 714de30db8..68f2ab22f2 100644
--- a/keyboards/s60-x/s60-x.h
+++ b/keyboards/s60-x/s60-x.h
@@ -23,8 +23,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "quantum.h"
 
 /* S60-X keymap definition macro
-* K2C, K31 and  K3C are extra keys for ISO
-* K0D is extra key from split backspace, K3E is extra key from split right shift
+* K31 is the extra key next to short left ISO shift
+* K2C is the moved key next to enter on ISO boards
+* K3C is the extra key next to short right JIS shift
+* K0D is extra key from split backspace
+* K3E is extra key from HHKB-style split right shift
 */
 
 #define KEYMAP( \
-- 
cgit v1.2.3


From 4725942dc71c2f386d8323865a6255f4dfd2785b Mon Sep 17 00:00:00 2001
From: Felix Uhl <felix.uhl@outlook.de>
Date: Thu, 11 Aug 2016 21:49:10 +0200
Subject: Small changes Enabled Bootmagic and ISO layouts on felix keymap Added
 unused pins

---
 keyboards/s60-x/config.h               |  2 +-
 keyboards/s60-x/keymaps/felix/keymap.c | 17 +++++++++--------
 2 files changed, 10 insertions(+), 9 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/s60-x/config.h b/keyboards/s60-x/config.h
index d548a99b33..ac7951c247 100644
--- a/keyboards/s60-x/config.h
+++ b/keyboards/s60-x/config.h
@@ -46,7 +46,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #define MATRIX_ROW_PINS { B7, B3, B2, B1, B0 }
 #define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, E6, F1 }
-#define UNUSED_PINS
+#define UNUSED_PINS { F0 }
 
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/s60-x/keymaps/felix/keymap.c b/keyboards/s60-x/keymaps/felix/keymap.c
index 3052dd8160..7fc0e021c9 100644
--- a/keyboards/s60-x/keymaps/felix/keymap.c
+++ b/keyboards/s60-x/keymaps/felix/keymap.c
@@ -18,6 +18,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	/* Layout 0: Default Layer
+	* RSFT will be replaced once a better way to control magic is found.
 	* ,-----------------------------------------------------------.
 	* |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|Del|
 	* |-----------------------------------------------------------|
@@ -25,17 +26,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	* |-----------------------------------------------------------|
 	* |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
 	* |-----------------------------------------------------------|
-	* |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /| Up  | <> |
+	* |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /| Up  |RSft|
 	* |-----------------------------------------------------------|
 	* |Fn2 |Gui |Alt |        SpaceFn        |Alt |Left|Down|Right|
 	* `-----------------------------------------------------------'
 	*/
 	KEYMAP(
-		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL, \
-		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,         \
-		KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NO,   KC_ENT,          \
-		KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_NO,   KC_UP,  KC_NUBS, \
-		KC_FN2,  KC_LGUI, KC_LALT,                   KC_FN0,                             KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT),
+		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL,  \
+		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,          \
+		KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,           \
+		KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_NO,   KC_UP,   KC_RSFT, \
+		KC_FN2,  KC_LGUI, KC_LALT,                            KC_FN0,                                      KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT),
 
 	/* Layout 1: Gaming Layer, SpaceFn disabled
 	* ,-----------------------------------------------------------.
@@ -55,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          \
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          \
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_FN1,  \
-		KC_TRNS, KC_NO,   KC_TRNS,                   KC_SPC,                             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+		KC_TRNS, KC_NO,   KC_TRNS,                            KC_SPC,                                      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
 
 	/* Layout 2: Function Layer
 	* ,-----------------------------------------------------------.
@@ -75,7 +76,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_MSTP, KC_TRNS, KC_TRNS, KC_PGUP, KC_UP,   KC_PGDN, KC_TRNS, KC_SLCK, KC_PAUS, KC_INS,           \
 		KC_TRNS, KC_VOLD, KC_MUTE, KC_VOLU, KC_TRNS, KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,  KC_TRNS, KC_TRNS, KC_PENT,          \
 		KC_TRNS, KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAUS, KC_PGUP, KC_FN1,  \
-		KC_TRNS, KC_TRNS, KC_TRNS,             KC_TRNS,                         KC_TRNS, KC_HOME, KC_PGDN, KC_END),
+		KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                                     KC_TRNS, KC_HOME, KC_PGDN, KC_END),
 };
 
 /*
-- 
cgit v1.2.3


From 911cc6832598ac9b637fdb11448354d418c197c4 Mon Sep 17 00:00:00 2001
From: Felix Uhl <felix.uhl@outlook.de>
Date: Sun, 14 Aug 2016 00:41:09 +0200
Subject: Added all original S60-X keymaps All keymaps that were included in
 VinnyCordeiro's repository were ported to QMK. Main Readme was copied over
 from VC's repo, slightly altered. Main Makefile was updated to reflect VC's
 original configuration. Small changes in felix keymap.

---
 keyboards/s60-x/Makefile                    |   2 +-
 keyboards/s60-x/keymaps/custom/keymap.c     |  28 ++++
 keyboards/s60-x/keymaps/custom/readme.md    |  15 ++
 keyboards/s60-x/keymaps/default/Makefile    |  21 ---
 keyboards/s60-x/keymaps/default/keymap.c    | 128 +++++---------
 keyboards/s60-x/keymaps/default/readme.md   |  28 +++-
 keyboards/s60-x/keymaps/felix/keymap.c      | 127 +++++++++++---
 keyboards/s60-x/keymaps/felix/readme.md     |  10 +-
 keyboards/s60-x/keymaps/hasu/keymap.c       | 182 ++++++++++++++++++++
 keyboards/s60-x/keymaps/hasu/readme.md      |   4 +
 keyboards/s60-x/keymaps/hhkb/keymap.c       |  52 ++++++
 keyboards/s60-x/keymaps/hhkb/readme.md      |  26 +++
 keyboards/s60-x/keymaps/iso/keymap.c        |  48 ++++++
 keyboards/s60-x/keymaps/iso/readme.md       |  28 ++++
 keyboards/s60-x/keymaps/jpec/keymap.c       |  92 +++++++++++
 keyboards/s60-x/keymaps/jpec/readme.md      |   1 +
 keyboards/s60-x/keymaps/plain/keymap.c      |  25 +++
 keyboards/s60-x/keymaps/plain/readme.md     |  16 ++
 keyboards/s60-x/keymaps/poker/keymap.c      | 180 ++++++++++++++++++++
 keyboards/s60-x/keymaps/poker/readme.md     |  31 ++++
 keyboards/s60-x/keymaps/poker_bit/keymap.c  | 110 ++++++++++++
 keyboards/s60-x/keymaps/poker_bit/readme.md |  31 ++++
 keyboards/s60-x/keymaps/poker_set/keymap.c  | 178 ++++++++++++++++++++
 keyboards/s60-x/keymaps/poker_set/readme.md |  31 ++++
 keyboards/s60-x/keymaps/spacefn/keymap.c    |  55 ++++++
 keyboards/s60-x/keymaps/spacefn/readme.md   |  27 +++
 keyboards/s60-x/readme.md                   | 248 ++++++++++++++++++++++++++--
 keyboards/s60-x/s60-x.h                     |   5 +
 28 files changed, 1579 insertions(+), 150 deletions(-)
 create mode 100644 keyboards/s60-x/keymaps/custom/keymap.c
 create mode 100644 keyboards/s60-x/keymaps/custom/readme.md
 delete mode 100644 keyboards/s60-x/keymaps/default/Makefile
 create mode 100644 keyboards/s60-x/keymaps/hasu/keymap.c
 create mode 100644 keyboards/s60-x/keymaps/hasu/readme.md
 create mode 100644 keyboards/s60-x/keymaps/hhkb/keymap.c
 create mode 100644 keyboards/s60-x/keymaps/hhkb/readme.md
 create mode 100644 keyboards/s60-x/keymaps/iso/keymap.c
 create mode 100644 keyboards/s60-x/keymaps/iso/readme.md
 create mode 100644 keyboards/s60-x/keymaps/jpec/keymap.c
 create mode 100644 keyboards/s60-x/keymaps/jpec/readme.md
 create mode 100644 keyboards/s60-x/keymaps/plain/keymap.c
 create mode 100644 keyboards/s60-x/keymaps/plain/readme.md
 create mode 100644 keyboards/s60-x/keymaps/poker/keymap.c
 create mode 100644 keyboards/s60-x/keymaps/poker/readme.md
 create mode 100644 keyboards/s60-x/keymaps/poker_bit/keymap.c
 create mode 100644 keyboards/s60-x/keymaps/poker_bit/readme.md
 create mode 100644 keyboards/s60-x/keymaps/poker_set/keymap.c
 create mode 100644 keyboards/s60-x/keymaps/poker_set/readme.md
 create mode 100644 keyboards/s60-x/keymaps/spacefn/keymap.c
 create mode 100644 keyboards/s60-x/keymaps/spacefn/readme.md

(limited to 'keyboards')

diff --git a/keyboards/s60-x/Makefile b/keyboards/s60-x/Makefile
index 57edd5e036..8b51d4609f 100644
--- a/keyboards/s60-x/Makefile
+++ b/keyboards/s60-x/Makefile
@@ -53,7 +53,7 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
 CONSOLE_ENABLE ?= yes        # Console for debug(+400)
diff --git a/keyboards/s60-x/keymaps/custom/keymap.c b/keyboards/s60-x/keymaps/custom/keymap.c
new file mode 100644
index 0000000000..59361241fa
--- /dev/null
+++ b/keyboards/s60-x/keymaps/custom/keymap.c
@@ -0,0 +1,28 @@
+#include "keymap_common.h"
+
+/* Main layer: Test layout, using all keys.
+
+      0     1     2     3     4     5     6     7     8     9     A     B     C     D     E
+   β”Œβ”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”
+ 0 β”‚GRAVEβ”‚  1  β”‚  2  β”‚  3  β”‚  4  β”‚  5  β”‚  6  β”‚  7  β”‚  8  β”‚  9  β”‚  0  β”‚  -  β”‚  =  β”‚PGUP β”‚BKSPCβ”‚
+   β”œβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”€
+ 1 β”‚ TAB β”‚  Q  β”‚  W  β”‚  E  β”‚  R  β”‚  T  β”‚  Y  β”‚  U  β”‚  I  β”‚  O  β”‚  P  β”‚  [  β”‚  ]  β”‚  \  β”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚
+   β”œβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”€
+ 2 β”‚CAPSLβ”‚  A  β”‚  S  β”‚  D  β”‚  F  β”‚  G  β”‚  H  β”‚  J  β”‚  K  β”‚  L  β”‚  ;  β”‚  '  β”‚PGDN β”‚ENTERβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚
+   β”œβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”€
+ 3 β”‚LSHFTβ”‚HOME β”‚  Z  β”‚  X  β”‚  C  β”‚  V  β”‚  B  β”‚  N  β”‚  M  β”‚  ,  β”‚  .  β”‚  /  β”‚ END β”‚RSHFTβ”‚  UP β”‚
+   β”œβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”€
+ 4 β”‚LCTRLβ”‚L_GUIβ”‚L_ALTβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚ SPC β”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚R_ALTβ”‚R_GUIβ”‚ APP β”‚RCTRLβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚
+   β””β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”˜
+*/
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* 0: ANSI qwerty */
+    KEYMAP(GRV,    1,    2,    3,    4,    5,    6,    7,    8,    9,    0, MINS,  EQL, PGUP, BSPC, \
+           TAB,    Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P, LBRC, RBRC, BSLS,       \
+          CAPS,    A,    S,    D,    F,    G,    H,    J,    K,    L, SCLN, QUOT, PGDN, ENT ,       \
+          LSFT, HOME,    Z,    X,    C,    V,    B,    N,    M, COMM,  DOT, SLSH,  END, RSFT,   UP, \
+          LCTL, LGUI, LALT,                    SPC,                   RALT, RGUI,  APP, RCTL),
+};
+const uint16_t PROGMEM fn_actions[] = {};
+
diff --git a/keyboards/s60-x/keymaps/custom/readme.md b/keyboards/s60-x/keymaps/custom/readme.md
new file mode 100644
index 0000000000..cf87bd915f
--- /dev/null
+++ b/keyboards/s60-x/keymaps/custom/readme.md
@@ -0,0 +1,15 @@
+ο»Ώ### 8  Custom
+The custom keymap - [keymap_custom.c](keymap_custom.c) - is where I tested all the switches, not being concerned with a specific layout or layers. It's a plain layout option with the extra keys used on ISO & HHKB layouts being assigned some other keys.
+
+#### 8.0 Default layer
+    β”Œβ”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”
+    β”‚  `  β”‚  1  β”‚  2  β”‚  3  β”‚  4  β”‚  5  β”‚  6  β”‚  7  β”‚  8  β”‚  9  β”‚  0  β”‚  -  β”‚  =  β”‚PgUp β”‚BkSpcβ”‚
+    β”œβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”€
+    β”‚ Tab β”‚  Q  β”‚  W  β”‚  E  β”‚  R  β”‚  T  β”‚  Y  β”‚  U  β”‚  I  β”‚  O  β”‚  P  β”‚  [  β”‚  ]  β”‚  \  β”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚
+    β”œβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”€
+    β”‚Caps β”‚  A  β”‚  S  β”‚  D  β”‚  F  β”‚  G  β”‚  H  β”‚  J  β”‚  K  β”‚  L  β”‚  ;  β”‚  '  β”‚PgDwnβ”‚Enterβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚
+    β”œβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”€
+    β”‚Shiftβ”‚Home β”‚  Z  β”‚  X  β”‚  C  β”‚  V  β”‚  B  β”‚  N  β”‚  M  β”‚  ,  β”‚  .  β”‚  /  β”‚ End β”‚Shiftβ”‚  Up β”‚
+    β”œβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”€
+    β”‚Ctrl β”‚ Gui β”‚ Alt β”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚Spaceβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚ Alt β”‚ Gui β”‚ App β”‚Ctrl β”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚
+    β””β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”˜
diff --git a/keyboards/s60-x/keymaps/default/Makefile b/keyboards/s60-x/keymaps/default/Makefile
deleted file mode 100644
index f4671a9d11..0000000000
--- a/keyboards/s60-x/keymaps/default/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
\ No newline at end of file
diff --git a/keyboards/s60-x/keymaps/default/keymap.c b/keyboards/s60-x/keymaps/default/keymap.c
index 3b680c3072..be7a71aff0 100644
--- a/keyboards/s60-x/keymaps/default/keymap.c
+++ b/keyboards/s60-x/keymaps/default/keymap.c
@@ -1,92 +1,48 @@
-/*
-Copyright 2016 Julien Pecqueur <julien@peclu.net>
-Copyright 2016 Felix Uhl <ifreilicht@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#include "keymap_common.h"
+
+/* 0: Main layer
+β”Œβ”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”
+β”‚ ESC β”‚  1  β”‚  2  β”‚  3  β”‚  4  β”‚  5  β”‚  6  β”‚  7  β”‚  8  β”‚  9  β”‚  0  β”‚  -  β”‚  =  β”‚β–’β–’β–’β–’β–’β”‚BKSPCβ”‚
+β”œβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”€
+β”‚ TAB β”‚  Q  β”‚  W  β”‚  E  β”‚  R  β”‚  T  β”‚  Y  β”‚  U  β”‚  I  β”‚  O  β”‚  P  β”‚  [  β”‚  ]  β”‚  \  β”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚
+β”œβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”€
+β”‚CAPSLβ”‚  A  β”‚  S  β”‚  D  β”‚  F  β”‚  G  β”‚  H  β”‚  J  β”‚  K  β”‚  L  β”‚  ;  β”‚  '  β”‚β–’β–’β–’β–’β–’β”‚ENTERβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚
+β”œβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”€
+β”‚LSHFTβ”‚β–’β–’β–’β–’β–’β”‚  Z  β”‚  X  β”‚  C  β”‚  V  β”‚  B  β”‚  N  β”‚  M  β”‚  ,  β”‚  .  β”‚  /  β”‚β–’β–’β–’β–’β–’β”‚RSHFTβ”‚β–’β–’β–’β–’β–’β”‚
+β”œβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”€
+β”‚LCTRLβ”‚L_GUIβ”‚L_ALTβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚ SPC β”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚R_ALTβ”‚ FN0 β”‚ APP β”‚RCTRLβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚
+β””β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”˜
 */
 
-#include "s60-x.h"
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-	/* Layout 0: Default Layer
-	* ,-----------------------------------------------------------.
-	* |`  |  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
-	* |-----------------------------------------------------------|
-	* |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
-	* |-----------------------------------------------------------|
-	* |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
-	* |-----------------------------------------------------------|
-	* |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |
-	* |-----------------------------------------------------------|
-	* |Fn1 |Gui |Alt |        SpaceFn         |Alt |Gui |App |Ctrl|
-	* `-----------------------------------------------------------'
-	*/
-	KEYMAP(
-		GRV,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    MINS,  EQL, BSPC, BSPC, \
-		TAB,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    LBRC, RBRC, BSLS, \
-		LCTL, A,    S,    D,    F,    G,    H,    J,    K,    L, SCLN,    QUOT, NUHS, ENT,  \
-		LSFT, NUBS, Z,    X,    C,    V,    B,    N,    M, COMM,  DOT,    SLSH,   NO, RSFT, NO, \
-		FN1,  LGUI, LALT,             FN0,                          RALT, RGUI, APP,  RCTL),
-
-	/* Layout 1: Function Layer
-	* ,-----------------------------------------------------------.
-	* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
-	* |-----------------------------------------------------------|
-	* |     |Prv|Ply|Nxt|Stp|   |   |PUp|Up |PDn|   |Slk|Pau|Ins  |
-	* |-----------------------------------------------------------|
-	* |      |Vl-|Mut|Vl+|   |   |Hom|Lef|Dow|Rig|End|   |PEnt    |
-	* |-----------------------------------------------------------|
-	* |        |Prt|Cut|Cop|Pst|Cal|   |   |   |   |   |CapsLock  |
-	* |-----------------------------------------------------------|
-	* |    |    |    |                        |    |    |    |    |
-	* `-----------------------------------------------------------'
-	*/
-	KEYMAP(
-		ESC,  F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,   F10,  F11,  F12,  TRNS, DEL,  \
-		TRNS, MPRV, MPLY, MNXT, MSTP, TRNS, TRNS, PGUP, UP,   PGDN, TRNS, SLCK, PAUS, INS,  \
-		TRNS, VOLD, MUTE, VOLU, TRNS, TRNS, HOME, LEFT, DOWN, RGHT, END,  TRNS, TRNS, PENT, \
-		TRNS, TRNS, PSCR, FN2,  FN3,  FN4,  CALC, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CAPS, TRNS, \
-		TRNS, TRNS, TRNS,             TRNS,                         TRNS, TRNS, TRNS, TRNS),
-};
-
-/*
-* Fn action definition
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* 0: ANSI qwerty */
+    KEYMAP(ESC,    1,    2,    3,    4,    5,    6,    7,    8,    9,    0, MINS,  EQL,   NO, BSPC, \
+           TAB,    Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P, LBRC, RBRC, BSLS,       \
+          CAPS,    A,    S,    D,    F,    G,    H,    J,    K,    L, SCLN, QUOT,   NO, ENT ,       \
+          LSFT,   NO,    Z,    X,    C,    V,    B,    N,    M, COMM,  DOT, SLSH,   NO, RSFT,   NO, \
+          LCTL, LGUI, LALT,                    SPC,                   RALT,  FN0,  APP, RCTL),
+
+/* 1: Fn layer
+β”Œβ”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”
+β”‚GRAVEβ”‚ F1  β”‚ F2  β”‚ F3  β”‚ F4  β”‚ F5  β”‚ F6  β”‚ F7  β”‚ F8  β”‚ F9  β”‚ F10 β”‚ F11 β”‚ F12 β”‚β–’β–’β–’β–’β–’β”‚     β”‚
+β”œβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”€
+β”‚     β”‚     β”‚ Up  β”‚     β”‚     β”‚     β”‚     β”‚     β”‚PGUP β”‚PGDWNβ”‚PRTSCβ”‚SCLCKβ”‚PAUSEβ”‚     β”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚
+β”œβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”€
+β”‚     β”‚Left β”‚Down β”‚Rightβ”‚     β”‚     β”‚     β”‚     β”‚     β”‚     β”‚     β”‚     β”‚β–’β–’β–’β–’β–’β”‚     β”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚
+β”œβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”€
+β”‚     β”‚β–’β–’β–’β–’β–’β”‚     β”‚     β”‚     β”‚     β”‚     β”‚     β”‚     β”‚     β”‚     β”‚     β”‚β–’β–’β–’β–’β–’β”‚     β”‚β–’β–’β–’β–’β–’β”‚
+β”œβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”€
+β”‚     β”‚     β”‚     β”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚     β”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚     β”‚     β”‚     β”‚     β”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚
+β””β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”˜
 */
-const uint16_t PROGMEM fn_actions[] = {
-	[0] = ACTION_LAYER_TAP_KEY(1, KC_SPACE),    /* SpaceFn layout 1 */
-	[1] = ACTION_LAYER_MOMENTARY(1),            /* Momentary layout 1 */
-	[2] = ACTION_MODS_KEY(MOD_LSFT, KC_DEL),    /* Cut  */
-	[3] = ACTION_MODS_KEY(MOD_LCTL, KC_INS),    /* Copy  */
-	[4] = ACTION_MODS_KEY(MOD_LSFT, KC_INS),    /* Paste */
+    KEYMAP(
+         GRV,   F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12, TRNS, TRNS, \
+        TRNS, TRNS,   UP, TRNS, TRNS, TRNS, TRNS, TRNS, PGUP, PGDN, PSCR, SLCK, PAUS, TRNS,       \
+        TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       \
+        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
+        TRNS, TRNS, TRNS,                   TRNS,                   TRNS, TRNS, TRNS, TRNS),
 };
 
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-    return MACRO_NONE;
+const uint16_t PROGMEM fn_actions[] = {
+	[0] = ACTION_LAYER_MOMENTARY(1),  // to Fn overlay
 };
-
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}
\ No newline at end of file
diff --git a/keyboards/s60-x/keymaps/default/readme.md b/keyboards/s60-x/keymaps/default/readme.md
index 73318dad72..01cda9df9b 100644
--- a/keyboards/s60-x/keymaps/default/readme.md
+++ b/keyboards/s60-x/keymaps/default/readme.md
@@ -1 +1,27 @@
-# The default keymap for s60-x
\ No newline at end of file
+ο»Ώ### 1  Standard - ANSI
+The standard keymap is the one that is pre-flashed on the S60-X.
+
+#### 1.0 Default layer
+    β”Œβ”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”
+    β”‚ ESC β”‚  1  β”‚  2  β”‚  3  β”‚  4  β”‚  5  β”‚  6  β”‚  7  β”‚  8  β”‚  9  β”‚  0  β”‚  -  β”‚  =  β”‚β–’β–’β–’β–’β–’β”‚BKSPCβ”‚
+    β”œβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”€
+    β”‚ TAB β”‚  Q  β”‚  W  β”‚  E  β”‚  R  β”‚  T  β”‚  Y  β”‚  U  β”‚  I  β”‚  O  β”‚  P  β”‚  [  β”‚  ]  β”‚  \  β”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚
+    β”œβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”€
+    β”‚CAPSLβ”‚  A  β”‚  S  β”‚  D  β”‚  F  β”‚  G  β”‚  H  β”‚  J  β”‚  K  β”‚  L  β”‚  ;  β”‚  '  β”‚β–’β–’β–’β–’β–’β”‚ENTERβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚
+    β”œβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”€
+    β”‚LSHFTβ”‚β–’β–’β–’β–’β–’β”‚  Z  β”‚  X  β”‚  C  β”‚  V  β”‚  B  β”‚  N  β”‚  M  β”‚  ,  β”‚  .  β”‚  /  β”‚β–’β–’β–’β–’β–’β”‚RSHFTβ”‚β–’β–’β–’β–’β–’β”‚
+    β”œβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”€
+    β”‚LCTRLβ”‚L_GUIβ”‚L_ALTβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚ SPC β”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚R_ALTβ”‚ FN0 β”‚ APP β”‚RCTRLβ”‚β–ˆβ–ˆβ–ˆβ–ˆβ–ˆβ”‚
+    β””β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”˜
+#### 1.1 Fn layer
+    β”Œβ”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”
+    β”‚GRAVEβ”‚ F1  β”‚ F2  β”‚ F3  β”‚ F4  β”‚ F5  β”‚ F6  β”‚ F7  β”‚ F8  β”‚ F9  β”‚ F10 β”‚ F11 β”‚ F12 β”‚β–’β–’β–’β–’β–’β”‚     β”‚
+    β”œβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”Όβ”