From 23cd9f4dee791464196faaf6692599325cfe6f3c Mon Sep 17 00:00:00 2001 From: Monksoffunk Date: Sat, 27 Oct 2018 13:23:49 +0900 Subject: Keyboard: Add new keyboard Zinc (#4245) * Add Zinc keyboard * Fix photo * Fix readme.md * Fix RGB LED init of monks/keymap.c * Fix default keymap and readme.jp * Fix change DEFS of RGB ANIMATIONS to LED_ANIMATIONS * Add EOL * Use serial_config_simpleapi.h * Fix comment char * Fix error handling in split_scomm.c : mtei works * Fix keymaps * Remove DISABLE_LEADER definition * Remove pro_micro.h * Add 2 spaces after Hardware name * Fix keymaps - remove audio codes - change LAYOUT to LAYOUT_ortho_4X12 - change "persistent_default_layer_set" to core function * Use the Community Layouts feature - with some clean up --- keyboards/zinc/config.h | 50 +++ keyboards/zinc/i2c.c | 162 ++++++++ keyboards/zinc/i2c.h | 49 +++ keyboards/zinc/info.json | 13 + keyboards/zinc/keymaps/default/config.h | 38 ++ keyboards/zinc/keymaps/default/keymap.c | 306 +++++++++++++++ keyboards/zinc/keymaps/default/readme_jp.md | 123 ++++++ keyboards/zinc/keymaps/default/rules.mk | 98 +++++ keyboards/zinc/keymaps/monks/config.h | 38 ++ keyboards/zinc/keymaps/monks/keymap.c | 255 ++++++++++++ keyboards/zinc/keymaps/monks/readme_jp.md | 103 +++++ keyboards/zinc/keymaps/monks/rules.mk | 100 +++++ keyboards/zinc/readme.md | 17 + keyboards/zinc/rev1/config.h | 149 +++++++ keyboards/zinc/rev1/info.json | 13 + keyboards/zinc/rev1/matrix.c | 356 +++++++++++++++++ keyboards/zinc/rev1/rev1.c | 6 + keyboards/zinc/rev1/rev1.h | 44 +++ keyboards/zinc/rev1/rules.mk | 4 + keyboards/zinc/rev1/serial_config.h | 18 + keyboards/zinc/rev1/serial_config_simpleapi.h | 8 + keyboards/zinc/rev1/split_scomm.c | 95 +++++ keyboards/zinc/rev1/split_scomm.h | 24 ++ keyboards/zinc/rev1/split_util.c | 70 ++++ keyboards/zinc/rev1/split_util.h | 19 + keyboards/zinc/reva/config.h | 143 +++++++ keyboards/zinc/reva/info.json | 13 + keyboards/zinc/reva/matrix.c | 356 +++++++++++++++++ keyboards/zinc/reva/reva.c | 6 + keyboards/zinc/reva/reva.h | 44 +++ keyboards/zinc/reva/rules.mk | 4 + keyboards/zinc/reva/serial_config.h | 18 + keyboards/zinc/reva/serial_config_simpleapi.h | 8 + keyboards/zinc/reva/split_scomm.c | 95 +++++ keyboards/zinc/reva/split_scomm.h | 24 ++ keyboards/zinc/reva/split_util.c | 70 ++++ keyboards/zinc/reva/split_util.h | 19 + keyboards/zinc/rules.mk | 72 ++++ keyboards/zinc/serial.c | 542 ++++++++++++++++++++++++++ keyboards/zinc/serial.h | 84 ++++ keyboards/zinc/zinc.c | 1 + keyboards/zinc/zinc.h | 14 + 42 files changed, 3671 insertions(+) create mode 100644 keyboards/zinc/config.h create mode 100644 keyboards/zinc/i2c.c create mode 100644 keyboards/zinc/i2c.h create mode 100644 keyboards/zinc/info.json create mode 100644 keyboards/zinc/keymaps/default/config.h create mode 100644 keyboards/zinc/keymaps/default/keymap.c create mode 100644 keyboards/zinc/keymaps/default/readme_jp.md create mode 100644 keyboards/zinc/keymaps/default/rules.mk create mode 100644 keyboards/zinc/keymaps/monks/config.h create mode 100644 keyboards/zinc/keymaps/monks/keymap.c create mode 100644 keyboards/zinc/keymaps/monks/readme_jp.md create mode 100644 keyboards/zinc/keymaps/monks/rules.mk create mode 100644 keyboards/zinc/readme.md create mode 100644 keyboards/zinc/rev1/config.h create mode 100644 keyboards/zinc/rev1/info.json create mode 100644 keyboards/zinc/rev1/matrix.c create mode 100644 keyboards/zinc/rev1/rev1.c create mode 100644 keyboards/zinc/rev1/rev1.h create mode 100644 keyboards/zinc/rev1/rules.mk create mode 100644 keyboards/zinc/rev1/serial_config.h create mode 100644 keyboards/zinc/rev1/serial_config_simpleapi.h create mode 100644 keyboards/zinc/rev1/split_scomm.c create mode 100644 keyboards/zinc/rev1/split_scomm.h create mode 100644 keyboards/zinc/rev1/split_util.c create mode 100644 keyboards/zinc/rev1/split_util.h create mode 100644 keyboards/zinc/reva/config.h create mode 100644 keyboards/zinc/reva/info.json create mode 100644 keyboards/zinc/reva/matrix.c create mode 100644 keyboards/zinc/reva/reva.c create mode 100644 keyboards/zinc/reva/reva.h create mode 100644 keyboards/zinc/reva/rules.mk create mode 100644 keyboards/zinc/reva/serial_config.h create mode 100644 keyboards/zinc/reva/serial_config_simpleapi.h create mode 100644 keyboards/zinc/reva/split_scomm.c create mode 100644 keyboards/zinc/reva/split_scomm.h create mode 100644 keyboards/zinc/reva/split_util.c create mode 100644 keyboards/zinc/reva/split_util.h create mode 100644 keyboards/zinc/rules.mk create mode 100644 keyboards/zinc/serial.c create mode 100644 keyboards/zinc/serial.h create mode 100644 keyboards/zinc/zinc.c create mode 100644 keyboards/zinc/zinc.h (limited to 'keyboards/zinc') diff --git a/keyboards/zinc/config.h b/keyboards/zinc/config.h new file mode 100644 index 0000000000..9c60d631bc --- /dev/null +++ b/keyboards/zinc/config.h @@ -0,0 +1,50 @@ +/* +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once +//#ifndef CONFIG_H +//#define CONFIG_H + +#include "config_common.h" + +// GCC include 'config.h" sequence in qmk_firmware/keyboards/zinc/ +// -include keyboards/zinc/config.h +// -include keyboards/zinc/rev?/config.h +// -include keyboards/zinc/rev?/keymaps/MAPNAME/config.h +// XXXX.c + +#include + +// GCC include search path in qmk_firmare/keyboards/zinc/ +// #include "..." search starts here: +// #include <...> search starts here: +// keyboards/zinc/rev?/keymaps/MAPNAME +// keyboards/zinc +// keyboards/zinc/rev? +// . +// ./tmk_core +// ...... + +#ifdef USE_Link_Time_Optimization + // LTO has issues with macros (action_get_macro) and "functions" (fn_actions), + // so just disable them + #define NO_ACTION_MACRO + #define NO_ACTION_FUNCTION +#endif // USE_Link_Time_Optimization + +//#endif /* CONFIG_H */ diff --git a/keyboards/zinc/i2c.c b/keyboards/zinc/i2c.c new file mode 100644 index 0000000000..4bee5c6398 --- /dev/null +++ b/keyboards/zinc/i2c.c @@ -0,0 +1,162 @@ +#include +#include +#include +#include +#include +#include +#include "i2c.h" + +#ifdef USE_I2C + +// Limits the amount of we wait for any one i2c transaction. +// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is +// 9 bits, a single transaction will take around 90μs to complete. +// +// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit +// poll loop takes at least 8 clock cycles to execute +#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 + +#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) + +volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +static volatile uint8_t slave_buffer_pos; +static volatile bool slave_has_register_set = false; + +// Wait for an i2c operation to finish +inline static +void i2c_delay(void) { + uint16_t lim = 0; + while(!(TWCR & (1<10. + // Check datasheets for more info. + TWBR = ((F_CPU/SCL_CLOCK)-16)/2; +} + +// Start a transaction with the given i2c slave address. The direction of the +// transfer is set with I2C_READ and I2C_WRITE. +// returns: 0 => success +// 1 => error +uint8_t i2c_master_start(uint8_t address) { + TWCR = (1< slave ACK +// 1 => slave NACK +uint8_t i2c_master_write(uint8_t data) { + TWDR = data; + TWCR = (1<= SLAVE_BUFFER_SIZE ) { + ack = 0; + slave_buffer_pos = 0; + } + slave_has_register_set = true; + } else { + i2c_slave_buffer[slave_buffer_pos] = TWDR; + BUFFER_POS_INC(); + } + break; + + case TW_ST_SLA_ACK: + case TW_ST_DATA_ACK: + // master has addressed this device as a slave transmitter and is + // requesting data. + TWDR = i2c_slave_buffer[slave_buffer_pos]; + BUFFER_POS_INC(); + break; + + case TW_BUS_ERROR: // something went wrong, reset twi state + TWCR = 0; + default: + break; + } + // Reset everything, so we are ready for the next TWI interrupt + TWCR |= (1< + +#ifndef F_CPU +#define F_CPU 16000000UL +#endif + +#define I2C_READ 1 +#define I2C_WRITE 0 + +#define I2C_ACK 1 +#define I2C_NACK 0 + +#define SLAVE_BUFFER_SIZE 0x10 + +// i2c SCL clock frequency 400kHz +#define SCL_CLOCK 400000L + +extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +void i2c_master_init(void); +uint8_t i2c_master_start(uint8_t address); +void i2c_master_stop(void); +uint8_t i2c_master_write(uint8_t data); +uint8_t i2c_master_read(int); +void i2c_reset_state(void); +void i2c_slave_init(uint8_t address); + + +static inline unsigned char i2c_start_read(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_READ); +} + +static inline unsigned char i2c_start_write(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_WRITE); +} + +// from SSD1306 scrips +extern unsigned char i2c_rep_start(unsigned char addr); +extern void i2c_start_wait(unsigned char addr); +extern unsigned char i2c_readAck(void); +extern unsigned char i2c_readNak(void); +extern unsigned char i2c_read(unsigned char ack); + +#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); + +#endif diff --git a/keyboards/zinc/info.json b/keyboards/zinc/info.json new file mode 100644 index 0000000000..740f31ae6e --- /dev/null +++ b/keyboards/zinc/info.json @@ -0,0 +1,13 @@ +{ + "keyboard_name": "Zinc", + "url": "https://github.com/monksoffunk/", + "maintainer": "monksoffunk", + "width": 15, + "height": 5, + "layouts": { + "LAYOUT": { + "key_count": 48, + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":13, "y":2}, {"x":14, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}] + } + } +} diff --git a/keyboards/zinc/keymaps/default/config.h b/keyboards/zinc/keymaps/default/config.h new file mode 100644 index 0000000000..4dcb0724ff --- /dev/null +++ b/keyboards/zinc/keymaps/default/config.h @@ -0,0 +1,38 @@ +/* +This is the c configuration file for the keymap + +Copyright 2018 monksoffunk +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once +// if you need more program area, try uncomment follow line +#include "serial_config_simpleapi.h" + +// place overrides here +// Selection of RGBLIGHT MODE to use. +#if defined(LED_ANIMATIONS) + #define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL + #define RGBLIGHT_EFFECT_SNAKE + #define RGBLIGHT_EFFECT_KNIGHT + #define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + //#define RGBLIGHT_EFFECT_RGB_TEST + //#define RGBLIGHT_EFFECT_ALTERNATING +#endif diff --git a/keyboards/zinc/keymaps/default/keymap.c b/keyboards/zinc/keymaps/default/keymap.c new file mode 100644 index 0000000000..7729914ecc --- /dev/null +++ b/keyboards/zinc/keymaps/default/keymap.c @@ -0,0 +1,306 @@ +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +rgblight_config_t RGB_current_config; +#endif + +extern uint8_t is_master; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum layer_number { + _QWERTY = 0, + _COLEMAK, + _DVORAK, + _LOWER, + _RAISE, + _ADJUST +}; + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + ADJUST, + BACKLIT, + KANA, + EISU, + RGBRST +}; + +enum macro_keycodes { + KC_SAMPLEMACRO, +}; + +//Macros +#define M_SAMPLE M(KC_SAMPLEMACRO) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { \ + /* Qwerty + * ,-----------------------------------------. ,-----------------------------------------. + * | Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Ctrl | A | S | D | F | G | | H | J | K | L | ; | ' | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | | N | M | , | . | / |Enter | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Esc |ADJUST| Win | Alt |LOWER |Space | | Space| RAISE| Left | Down | Up | Right| + * `-----------------------------------------' `-----------------------------------------' + */ +[_QWERTY] = LAYOUT_ortho_4x12( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ + KC_ESC, ADJUST, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ + ), + + /* Colemak + * ,-----------------------------------------. ,-----------------------------------------. + * | Tab | Q | W | F | P | G | | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Ctrl | A | R | S | T | D | | H | N | E | I | O | ' | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | | K | M | , | . | / |Enter | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Esc |ADJUST| Alt | Win |LOWER |Space | | Space| RAISE| Left | Down | Up | Right| + * `-----------------------------------------' `-----------------------------------------' + */ + [_COLEMAK] = LAYOUT_ortho_4x12( \ + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \ + KC_LCTL, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ + KC_ESC, ADJUST, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ + ), + + /* Dvorak + * ,-----------------------------------------. ,-----------------------------------------. + * | Tab | ' | , | . | P | Y | | F | G | C | R | L | Del | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Ctrl | A | O | E | U | I | | D | H | T | N | S | / | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Esc |ADJUST| Alt | Win |LOWER |Space | | Space| RAISE| Left | Down | Up | Right| + * `-----------------------------------------' `-----------------------------------------' + */ + [_DVORAK] = LAYOUT_ortho_4x12( \ + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_DEL, \ + KC_LCTL, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \ + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \ + KC_ESC, ADJUST, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ + ), + + /* Lower + * ,-----------------------------------------. ,-----------------------------------------. + * | ~ | ! | @ | # | $ | % | | ^ | & | * | ( | ) | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | - | _ | + | { | } | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | | | | Home | End | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------' `-----------------------------------------' + */ + [_LOWER] = LAYOUT_ortho_4x12( \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \ + _______, _______, _______, _______, _______, _______, KC_MINS, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_END, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ + ), + + /* Raise + * ,-----------------------------------------. ,-----------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | F1 | F2 | F3 | F4 | F5 | | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | | F12 | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------' `-----------------------------------------' + */ + [_RAISE] = LAYOUT_ortho_4x12( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ + ), + + /* Adjust (Lower + Raise) + * ,-----------------------------------------. ,-----------------------------------------. + * | | Reset|RGBRST|Aud on|Audoff| | | |Qwerty|Colemk|Dvorak| | Ins | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | |RGB ON| HUE+ | SAT+ | VAL+ | Mac | | Win | - | = |Print |ScLock|Pause | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | MODE | HUE- | SAT- | VAL- | | | | | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | EISU | EISU | EISU | | KANA | KANA | Home |PageDn|PageUp| End | + * `-----------------------------------------' `-----------------------------------------' + */ + [_ADJUST] = LAYOUT_ortho_4x12( \ + _______, RESET, RGBRST, _______, _______, _______, _______, QWERTY, COLEMAK, DVORAK, _______, KC_INS, \ + _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, AG_NORM, AG_SWAP, KC_MINS, KC_EQL, KC_PSCR, KC_SLCK, KC_PAUS,\ + _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______,\ + _______, _______, _______, EISU, EISU, EISU, KANA, KANA, KC_HOME, KC_PGDN, KC_PGUP, KC_END\ + ) +}; + +// define variables for reactive RGB +bool TOG_STATUS = false; + +// Setting ADJUST layer RGB back to default +void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { + #ifdef RGBLIGHT_ENABLE + rgblight_mode_noeeprom(RGB_current_config.mode); + #endif + layer_on(layer3); + } else { + layer_off(layer3); + } +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_DVORAK); + } + return false; + break; + + case LOWER: + if (record->event.pressed) { + //not sure how to have keyboard check mode and set it to a variable, so my work around + //uses another variable that would be set to true after the first time a reactive key is pressed. + if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false + } else { + TOG_STATUS = !TOG_STATUS; + #ifdef RGBLIGHT_ENABLE + rgblight_mode_noeeprom(16); + #endif + } + layer_on(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + #ifdef RGBLIGHT_ENABLE + rgblight_mode_noeeprom(RGB_current_config.mode); // revert RGB to initial mode prior to RGB mode change + #endif + TOG_STATUS = false; + layer_off(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + + case RAISE: + if (record->event.pressed) { + //not sure how to have keyboard check mode and set it to a variable, so my work around + //uses another variable that would be set to true after the first time a reactive key is pressed. + if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false + } else { + TOG_STATUS = !TOG_STATUS; + #ifdef RGBLIGHT_ENABLE + rgblight_mode_noeeprom(15); + #endif + } + layer_on(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + #ifdef RGBLIGHT_ENABLE + rgblight_mode_noeeprom(RGB_current_config.mode); // revert RGB to initial mode prior to RGB mode change + #endif + layer_off(_RAISE); + TOG_STATUS = false; + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released + case RGB_MOD: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + rgblight_mode_noeeprom(RGB_current_config.mode); + rgblight_step(); + RGB_current_config.mode = rgblight_config.mode; + } + #endif + return false; + break; + + case EISU: + if (record->event.pressed) { + if(keymap_config.swap_lalt_lgui==false){ + register_code(KC_LANG2); + }else{ + SEND_STRING(SS_LALT("`")); + } + } else { + unregister_code(KC_LANG2); + } + return false; + break; + case KANA: + if (record->event.pressed) { + if(keymap_config.swap_lalt_lgui==false){ + register_code(KC_LANG1); + }else{ + SEND_STRING(SS_LALT("`")); + } + } else { + unregister_code(KC_LANG1); + } + return false; + break; + + case RGBRST: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + RGB_current_config = rgblight_config; + } + #endif + break; + } + return true; +} + + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + rgblight_init(); + RGB_current_config = rgblight_config; + #endif +} + + diff --git a/keyboards/zinc/keymaps/default/readme_jp.md b/keyboards/zinc/keymaps/default/readme_jp.md new file mode 100644 index 0000000000..f6e91f0c89 --- /dev/null +++ b/keyboards/zinc/keymaps/default/readme_jp.md @@ -0,0 +1,123 @@ +# The Default Zinc Layout +## 配列 + +### Qwerty配列 + +``` + ,-----------------------------------------. ,-----------------------------------------. + | Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | Ctrl | A | S | D | F | G | | H | J | K | L | ; | ' | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | Shift| Z | X | C | V | B | | N | M | , | . | / |Enter | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | Esc | Fn | Alt | Win |Lower |Space | | Space| Raise| Left | Down | Up | Right| + `------------------------------------------ ------------------------------------------' +``` + +### Colemak + +``` + ,-----------------------------------------. ,-----------------------------------------. + | Tab | Q | W | F | P | G | | J | L | U | Y | ; | Bksp | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | Ctrl | A | R | S | T | D | | H | N | E | I | O | ' | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | Shift| Z | X | C | V | B | | K | M | , | . | / |Enter | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | Esc |ADJUST| Alt | Win |LOWER |Space | | Space| RAISE| Left | Down | Up | Right| + `------------------------------------------ ------------------------------------------' +``` + +### Dvorak + +``` + ,-----------------------------------------. ,-----------------------------------------. + | Tab | ' | , | . | P | Y | | F | G | C | R | L | Del | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | Ctrl | A | O | E | U | I | | D | H | T | N | S | / | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | Shift| ; | Q | J | K | X | | B | M | W | V | Z |Enter | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | Esc |ADJUST| Alt | Win |LOWER |Space | | Space| RAISE| Left | Down | Up | Right| + `-----------------------------------------' `-----------------------------------------' +``` + + +## コンパイルの仕方 + +コンパイルは、qmk_firmware のトップディレクトリで行います。 + +``` +$ cd qmk_firmware +``` +qmk_firmwareでは各キーボードのコンパイルは、`<キーボード名>:<キーマップ名>`という指定で行います。 + +``` +$ make zinc:default +``` + +キーボードへの書き込みまで同時に行うには下記のように`:avrdude`を付けます。 + +``` +$ make zinc:default:avrdude +``` + +コンパイル結果と中間生成物を消去したい場合は以下のようにします。 + +``` +$ make zinc:default:clean +``` + +## カスタマイズ + +コマンドラインからオプションを指定してビルドすることが出来ます。 + +``` +# Zinc keyboard 'default' keymap: convenient command line option +make ZINC= zinc:defualt +# option= back | under | na | ios +# ex. +# make ZINC=under zinc:defualt +# make ZINC=under,ios zinc:defualt +# make ZINC=back zinc:default +# make ZINC=back,na zinc:default +# make ZINC=back,ios zinc:default +``` + +あるいは`qmk_firmware/keyboards/zinc/rev1/keymaps/default/rules.mk` の以下の部分を直接編集して機能を有効化してください。 + +``` +# Zinc keyboard customize +LED_BACK_ENABLE = no # LED backlight (Enable SK6812mini backlight) +LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight) +LED_ANIMATIONS = yes # LED animations +IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) + + +``` + +## RGB backlight を有効にする + +rules.mk の下記の部分を編集して no を yes に変更してください。 +``` +LED_BACK_ENABLE = yes # LED backlight (Enable SK6812mini backlight) +``` + + +## RGB Underglow を有効にする + +rules.mk の下記の部分を編集して no を yes に変更してください。 +``` +LED_UNDERGLOW_ENABLE = yes # LED underglow (Enable WS2812 RGB underlight.) +``` + + +## iPad/iPhoneサポートを有効にする。 + +rules.mk の下記の部分を編集して no を yes に変更してください。 +RBG Underglow や RGBバックライトの輝度を抑えて、iPad, iPhone にも接続できるようになります。 + +``` +IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) +``` \ No newline at end of file diff --git a/keyboards/zinc/keymaps/default/rules.mk b/keyboards/zinc/keymaps/default/rules.mk new file mode 100644 index 0000000000..2dcefc0016 --- /dev/null +++ b/keyboards/zinc/keymaps/default/rules.mk @@ -0,0 +1,98 @@ + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SWAP_HANDS_ENABLE = no # Enable one-hand typing + +define ZINC_CUSTOMISE_MSG + $(info Zinc customize) + $(info - LED_BACK_ENABLE=$(LED_BACK_ENABLE)) + $(info - LED_UNDERGLOW_ENABLE=$(LED_UNDERGLOW_ENABLE)) + $(info - LED_ANIMATION=$(LED_ANIMATIONS)) + $(info - IOS_DEVICE_ENABLE=$(IOS_DEVICE_ENABLE)) +endef + +# Zinc keyboard customize +LED_BACK_ENABLE = no # LED backlight (Enable SK6812mini backlight) +LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight) +LED_ANIMATIONS = yes # LED animations +IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) +Link_Time_Optimization = no # if firmware size over limit, try this option + +#### LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE. +#### Do not enable these with audio at the same time. + +### Zinc keyboard 'default' keymap: convenient command line option +## make ZINC= zinc:defualt +## option= back | under | na | ios +## ex. +## make ZINC=under zinc:defualt +## make ZINC=under,ios zinc:defualt +## make ZINC=back zinc:default +## make ZINC=back,na zinc:default +## make ZINC=back,ios zinc:default + +ifneq ($(strip $(ZINC)),) + ifeq ($(findstring back,$(ZINC)), back) + LED_BACK_ENABLE = yes + else ifeq ($(findstring under,$(ZINC)), under) + LED_UNDERGLOW_ENABLE = yes + endif + ifeq ($(findstring na,$(ZINC)), na) + LED_ANIMATIONS = no + endif + ifeq ($(findstring ios,$(ZINC)), ios) + IOS_DEVICE_ENABLE = yes + endif + $(eval $(call ZINC_CUSTOMISE_MSG)) + $(info ) +endif + +ifeq ($(strip $(LED_BACK_ENABLE)), yes) + RGBLIGHT_ENABLE = yes + OPT_DEFS += -DRGBLED_BACK + ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes) + $(eval $(call ZINC_CUSTOMISE_MSG)) + $(error LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE both 'yes') + endif +else ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes) + RGBLIGHT_ENABLE = yes +else + RGBLIGHT_ENABLE = no +endif + +ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) + OPT_DEFS += -DIOS_DEVICE_ENABLE +endif + +ifeq ($(strip $(LED_ANIMATIONS)), yes) +# OPT_DEFS += -DRGBLIGHT_ANIMATIONS + OPT_DEFS += -DLED_ANIMATIONS + +endif + +ifeq ($(strip $(Link_Time_Optimization)),yes) + EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization +endif + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + + +# Uncomment these for debugging +# $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE)) +# $(info -- OPT_DEFS=$(OPT_DEFS)) +# $(info ) diff --git a/keyboards/zinc/keymaps/monks/config.h b/keyboards/zinc/keymaps/monks/config.h new file mode 100644 index 0000000000..4dcb0724ff --- /dev/null +++ b/keyboards/zinc/keymaps/monks/config.h @@ -0,0 +1,38 @@ +/* +This is the c configuration file for the keymap + +Copyright 2018 monksoffunk +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once +// if you need more program area, try uncomment follow line +#include "serial_config_simpleapi.h" + +// place overrides here +// Selection of RGBLIGHT MODE to use. +#if defined(LED_ANIMATIONS) + #define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL + #define RGBLIGHT_EFFECT_SNAKE + #define RGBLIGHT_EFFECT_KNIGHT + #define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + //#define RGBLIGHT_EFFECT_RGB_TEST + //#define RGBLIGHT_EFFECT_ALTERNATING +#endif diff --git a/keyboards/zinc/keymaps/monks/keymap.c b/keyboards/zinc/keymaps/monks/keymap.c new file mode 100644 index 0000000000..5fd7c6aa85 --- /dev/null +++ b/keyboards/zinc/keymaps/monks/keymap.c @@ -0,0 +1,255 @@ +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +rgblight_config_t RGB_current_config; +#endif + +extern uint8_t is_master; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum layer_number { + _QWERTY = 0, + _LOWER, + _RAISE, + _ADJUST +}; + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + ADJUST, + BACKLIT, + KANA, + EISU, + RGBRST +}; + +enum macro_keycodes { + KC_SAMPLEMACRO, +}; + + +//Macros +#define M_SAMPLE M(KC_SAMPLEMACRO) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { \ + /* Qwerty + * ,-----------------------------------------. ,-----------------------------------------. + * | Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Ctrl | A | S | D | F | G | | H | J | K | L | ; | ' | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | | N | M | , | . | / |Enter | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Esc |ADJUST| Alt | GUI |LOWER |Space | | Space| RAISE| KANA | Left | Down | Right| + * `-----------------------------------------' `-----------------------------------------' + */ +[_QWERTY] = LAYOUT_ortho_4x12( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ + KC_ESC, ADJUST, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KANA, KC_LEFT, KC_DOWN, KC_RGHT \ + ), + + /* Lower + * ,-----------------------------------------. ,-----------------------------------------. + * | ~ | ! | @ | # | $ | % | | ^ | & | * | ( | ) | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | - | _ | + | { | } | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | | | | | UP | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | | | | | | | + * `-----------------------------------------' `-----------------------------------------' + */ + [_LOWER] = LAYOUT_ortho_4x12( \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \ + _______, _______, _______, _______, _______, _______, KC_MINS, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), + + /* Raise + * ,-----------------------------------------. ,-----------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | F1 | F2 | F3 | F4 | F5 | | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | | F12 | | | | ? | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------' `-----------------------------------------' + */ + [_RAISE] = LAYOUT_ortho_4x12( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, S(KC_SLSH), _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ + ), + + /* Adjust (Lower + Raise) + * ,-----------------------------------------. ,-----------------------------------------. + * | | Reset|RGBRST| | | | | | | | | | Ins | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | |RGB ON| HUE+ | SAT+ | VAL+ | Mac | | Win | - | = |Print |ScLock|Pause | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | MODE | HUE- | SAT- | VAL- | | | | | | |PageUp| | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | EISU | EISU | EISU | | KANA | KANA | KANA | Home |PageDn| End | + * `-----------------------------------------' `-----------------------------------------' + */ + [_ADJUST] = LAYOUT_ortho_4x12( \ + _______, RESET, RGBRST, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, \ + _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, AG_NORM, AG_SWAP, KC_MINS, KC_EQL, KC_PSCR, KC_SLCK, KC_PAUS,\ + _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, KC_PGUP, _______,\ + _______, _______, _______, EISU, EISU, EISU, KANA, KANA, KANA, KC_HOME, KC_PGDN, KC_END\ + ) +}; + +// define variables for reactive RGB +bool TOG_STATUS = false; + +// Setting ADJUST layer RGB back to default +void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { + #ifdef RGBLIGHT_ENABLE + rgblight_mode_noeeprom(RGB_current_config.mode); + #endif + layer_on(layer3); + } else { + layer_off(layer3); + } +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + + case LOWER: + if (record->event.pressed) { + //not sure how to have keyboard check mode and set it to a variable, so my work around + //uses another variable that would be set to true after the first time a reactive key is pressed. + if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false + } else { + TOG_STATUS = !TOG_STATUS; + #ifdef RGBLIGHT_ENABLE + rgblight_mode_noeeprom(16); + #endif + } + layer_on(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + #ifdef RGBLIGHT_ENABLE + rgblight_mode_noeeprom(RGB_current_config.mode); // revert RGB to initial mode prior to RGB mode change + #endif + TOG_STATUS = false; + layer_off(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + + case RAISE: + if (record->event.pressed) { + //not sure how to have keyboard check mode and set it to a variable, so my work around + //uses another variable that would be set to true after the first time a reactive key is pressed. + if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false + } else { + TOG_STATUS = !TOG_STATUS; + #ifdef RGBLIGHT_ENABLE + rgblight_mode_noeeprom(15); + #endif + } + layer_on(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + #ifdef RGBLIGHT_ENABLE + rgblight_mode_noeeprom(RGB_current_config.mode); // revert RGB to initial mode prior to RGB mode change + #endif + layer_off(_RAISE); + TOG_STATUS = false; + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released + case RGB_MOD: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + rgblight_mode_noeeprom(RGB_current_config.mode); + rgblight_step(); + RGB_current_config.mode = rgblight_config.mode; + } + #endif + return false; + break; + + case EISU: + if (record->event.pressed) { + if(keymap_config.swap_lalt_lgui==false){ + register_code(KC_LANG2); + }else{ + SEND_STRING(SS_LALT("`")); + } + } else { + unregister_code(KC_LANG2); + } + return false; + break; + case KANA: + if (record->event.pressed) { + if(keymap_config.swap_lalt_lgui==false){ + register_code(KC_LANG1); + }else{ + SEND_STRING(SS_LALT("`")); + } + } else { + unregister_code(KC_LANG1); + } + return false; + break; + + case RGBRST: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + RGB_current_config = rgblight_config; + } + #endif + break; + } + return true; +} + + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + rgblight_init(); + RGB_current_config = rgblight_config; + #endif +} diff --git a/keyboards/zinc/keymaps/monks/readme_jp.md b/keyboards/zinc/keymaps/monks/readme_jp.md new file mode 100644 index 0000000000..680e2866c5 --- /dev/null +++ b/keyboards/zinc/keymaps/monks/readme_jp.md @@ -0,0 +1,103 @@ +# monksoffunk's personal zinc Layout +## 配列 + +### Qwerty配列 + +``` + ,-----------------------------------------. ,-----------------------------------------. + | Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | Ctrl | A | S | D | F | G | | H | J | K | L | ; | ' | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | Shift| Z | X | C | V | B | | N | M | , | . | / |Enter | + |------+------+------+------+------+------| |------+------+------+------+------+------| + | Esc |ADJUST| Alt | GUI |LOWER |Space | | Space| RAISE| KANA | Left | Down | Right| + `------------------------------------------ ------------------------------------------' +``` + +KANAキーを独立させ、UPキーをLOWER＋スラッシュに当てています。そのほかデフォルトからレイヤーをかなりいじっています。 +また、RGB LEDがアンコメントしてありますので、実装していない場合はソースを見て適宜コメントアウトしてください。 + +## コンパイルの仕方 + +コンパイルは、qmk_firmware のトップディレクトリで行います。 + +``` +$ cd qmk_firmware +``` +qmk_firmwareでは各キーボードのコンパイルは、`<キーボード名>:<キーマップ名>`という指定で行います。 + +``` +$ make zinc:monks +``` + +キーボードへの書き込みまで同時に行うには下記のように`:avrdude`を付けます。 + +``` +$ make zinc:monks:avrdude +``` + +コンパイル結果と中間生成物を消去したい場合は以下のようにします。 + +``` +$ make zinc:monks:clean +``` + +なお、avrdudeではなくQMK Toolbox（GUIツール）を使う方法もあります。 + +https://github.com/qmk/qmk_toolbox/releases + +その場合は、$ make zinc:monksでビルドした成果物をQMK Toolboxから指定してください。 + +## カスタマイズ + +コマンドラインからオプションを指定してビルドすることが出来ます。 + +``` +# Zinc keyboard 'monks' keymap: convenient command line option +make ZINC= zinc:monks +# option= back | under | na | ios +# ex. +# make ZINC=under zinc:monks +# make ZINC=under,ios zinc:monks +# make ZINC=back zinc:monks +# make ZINC=back,na zinc:monks +# make ZINC=back,ios zinc:monks +``` + +あるいは`qmk_firmware/keyboards/zinc/rev1/keymaps/monks/rules.mk` の以下の部分を編集して機能を有効化してください。 + +``` +# Zinc keyboard customize +LED_BACK_ENABLE = no # LED backlight (Enable SK6812mini backlight) +LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight) +LED_ANIMATIONS = yes # LED animations +IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) + + +``` + +## RGB backlight を有効にする + +rules.mk の下記の部分を編集して no を yes に変更してください。 +``` +LED_BACK_ENABLE = yes # LED backlight (Enable SK6812mini backlight) +``` + + +## RGB Underglow を有効にする + +rules.mk の下記の部分を編集して no を yes に変更してください。 +``` +LED_UNDERGLOW_ENABLE = yes # LED underglow (Enable WS2812 RGB underlight) +``` + + +## iPad/iPhoneサポートを有効にする。 + +rules.mk の下記の部分を編集して no を yes に変更してください。 +RBG Underglow や RGBバックライトの輝度を抑えて、iPad, iPhone にも接続できるようになります。 + +``` +IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) +``` \ No newline at end of file diff --git a/keyboards/zinc/keymaps/monks/rules.mk b/keyboards/zinc/keymaps/monks/rules.mk new file mode 100644 index 0000000000..a5335def87 --- /dev/null +++ b/keyboards/zinc/keymaps/monks/rules.mk @@ -0,0 +1,100 @@ + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SWAP_HANDS_ENABLE = no # Enable one-hand typing + +define ZINC_CUSTOMISE_MSG + $(info Zinc customize) + $(info - LED_BACK_ENABLE=$(LED_BACK_ENABLE)) + $(info - LED_UNDERGLOW_ENABLE=$(LED_UNDERGLOW_ENABLE)) + $(info - LED_ANIMATION=$(LED_ANIMATIONS)) + $(info - IOS_DEVICE_ENABLE=$(IOS_DEVICE_ENABLE)) +endef + +# Zinc keyboard customize +LED_BACK_ENABLE = no # LED backlight (Enable SK6812mini backlight) +LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight) +LED_ANIMATIONS = yes # LED animations +IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) +Link_Time_Optimization = no # if firmware size over limit, try this option + +#### LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE. +#### Do not enable these with audio at the same time. + +### Zinc keyboard 'default' keymap: convenient command line option +## make ZINC= zinc:defualt +## option= back | under | na | ios +## ex. +## make ZINC=under zinc:defualt +## make ZINC=under,ios zinc:defualt +## make ZINC=back zinc:default +## make ZINC=back,na zinc:default +## make ZINC=back,ios zinc:default + +ifneq ($(strip $(ZINC)),) + ifeq ($(findstring back,$(ZINC)), back) + LED_BACK_ENABLE = yes + else ifeq ($(findstring under,$(ZINC)), under) + LED_UNDERGLOW_ENABLE = yes + endif + ifeq ($(findstring na,$(ZINC)), na) + LED_ANIMATIONS = no + endif + ifeq ($(findstring ios,$(ZINC)), ios) + IOS_DEVICE_ENABLE = yes + endif + $(eval $(call ZINC_CUSTOMISE_MSG)) + $(info ) +endif + +ifeq ($(strip $(LED_BACK_ENABLE)), yes) + RGBLIGHT_ENABLE = yes + OPT_DEFS += -DRGBLED_BACK + ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes) + $(eval $(call ZINC_CUSTOMISE_MSG)) + $(error LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE both 'yes') + endif +else ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes) + RGBLIGHT_ENABLE = yes +else + RGBLIGHT_ENABLE = no +endif + +ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) + OPT_DEFS += -DIOS_DEVICE_ENABLE +endif + +ifeq ($(strip $(LED_ANIMATIONS)), yes) +# OPT_DEFS += -DRGBLIGHT_ANIMATIONS + OPT_DEFS += -DLED_ANIMATIONS +endif + +ifeq ($(strip $(Link_Time_Optimization)),yes) + EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization +endif + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif + +# Uncomment these for debugging +# $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE)) +# $(info -- OPT_DEFS=$(OPT_DEFS)) +# $(info ) diff --git a/keyboards/zinc/readme.md b/keyboards/zinc/readme.md new file mode 100644 index 0000000000..3b4ce105c8 --- /dev/null +++ b/keyboards/zinc/readme.md @@ -0,0 +1,17 @@ +Zinc +=== + +![Zinc](https://i.imgur.com/vxlpWkD.jpg) + +40% row-staggered split keyboard. + +Keyboard Maintainer: [monksoffunk](https://github.com/monksoffunk/) [@monksoffunkJP](https://twitter.com/monksoffunkJP) +Hardware Supported: Zinc PCB +Hardware Availability: (https://twitter.com/monksoffunkJP) + +Make example for this keyboard (after setting up your build environment): + + make zinc:default + + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/zinc/rev1/config.h b/keyboards/zinc/rev1/config.h new file mode 100644 index 0000000000..c628400f2e --- /dev/null +++ b/keyboards/zinc/rev1/config.h @@ -0,0 +1,149 @@ +/* +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +//#ifndef REV1_CONFIG_H +//#define REV1_CONFIG_H + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x9991 +#define DEVICE_VER 0x0001 +#define MANUFACTURER monksoffunk +#define PRODUCT zinc rev.1 +#define DESCRIPTION A split keyboard + + +#define PREVENT_STUCK_MODIFIERS +#define TAPPING_FORCE_HOLD +#define TAPPING_TERM 100 + +/* Use I2C or Serial */ +//#define USE_I2C +#define USE_SERIAL +//#define USE_MATRIX_I2C + +/* Select hand configuration */ +#define MASTER_LEFT +//#define MASTER_RIGHT +//#define EE_HANDS + + +/* key matrix size */ +// Rows are doubled-up + #define MATRIX_ROWS 8 + #define MATRIX_ROW_PINS { F6, F7, B1, B3 } + +// wiring of each half +#define MATRIX_COLS 6 +#define MATRIX_COL_PINS { F4, D4, C6, D7, E6, B4 } + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +// #define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D3 +#define RGBLIGHT_TIMER +//#define RGBLED_NUM 12 // Number of LEDs. see ./keymaps/default/config.h +#define ws2812_PORTREG PORTD +#define ws2812_DDRREG DDRD + +// RGB LED support +//#de