From a336c2c5005251e4cb0f3a62ccabdb4cfccad915 Mon Sep 17 00:00:00 2001 From: lokher Date: Tue, 6 Dec 2022 17:10:48 +0800 Subject: Merge upstream master to 2022 Q4 breaking change --- keyboards/wilba_tech/wt75_b/config.h | 123 ----------------------------------- 1 file changed, 123 deletions(-) delete mode 100644 keyboards/wilba_tech/wt75_b/config.h (limited to 'keyboards/wilba_tech/wt75_b/config.h') diff --git a/keyboards/wilba_tech/wt75_b/config.h b/keyboards/wilba_tech/wt75_b/config.h deleted file mode 100644 index 6d2c9fa17c..0000000000 --- a/keyboards/wilba_tech/wt75_b/config.h +++ /dev/null @@ -1,123 +0,0 @@ -/* Copyright 2019 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 16 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B7, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, B2, D4 } - -/* COL2ROW, ROW2COL */ -#define DIODE_DIRECTION ROW2COL - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT - -// enable the mono backlight -#define MONO_BACKLIGHT_ENABLED 1 - -// enable the specific indicators -#define MONO_BACKLIGHT_WT75_B - -// disable backlight when USB suspended (PC sleep/hibernate/shutdown) -#define MONO_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0 - -// disable backlight after timeout in minutes, 0 = no timeout -#define MONO_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0 - -// the default brightness -#define MONO_BACKLIGHT_BRIGHTNESS 255 - -// the default effect -#define MONO_BACKLIGHT_EFFECT 1 - -// the default effect speed (0-3) -#define MONO_BACKLIGHT_EFFECT_SPEED 0 - -// Backlight config starts after VIA's EEPROM usage, -// dynamic keymaps start after this. -#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 7 -- cgit v1.2.3