From aa06893b58ac3ed88e796968d237f60f4c156875 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Mon, 20 Jun 2022 14:20:56 +1000 Subject: Add Djinn. (#17382) * Add Djinn. * Review comments. * Further cleanup. --- keyboards/tzarc/djinn/readme.md | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 keyboards/tzarc/djinn/readme.md (limited to 'keyboards/tzarc/djinn/readme.md') diff --git a/keyboards/tzarc/djinn/readme.md b/keyboards/tzarc/djinn/readme.md new file mode 100644 index 0000000000..5cb9e9339c --- /dev/null +++ b/keyboards/tzarc/djinn/readme.md @@ -0,0 +1,27 @@ +# Djinn + +![Djinn](https://i.imgur.com/ArSjkv8.jpg) + +The Djinn is a 64-key split keyboard -- dual 4x7 with a 4-key thumb cluster and encoders. It also has a 5-way tactile switch under the thumb. Oh, and two displays. + +Keyboard Maintainer: [tzarc](https://github.com/tzarc) +Hardware Supported: Djinn: rev1, rev2 +Hardware Availability: [Open-source](https://github.com/tzarc/djinn) + +Make example for this keyboard (after setting up your build environment): + + make tzarc/djinn/rev2:default + +Flashing example for this keyboard: + + make tzarc/djinn/rev2:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the top-left key and plug in the keyboard. +* **Physical reset button**: Briefly press the button on the back of the PCB. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. -- cgit v1.2.3