From fb93869af0bb589237079fdd2e8245b10af0d045 Mon Sep 17 00:00:00 2001 From: takashicompany Date: Sat, 11 Dec 2021 15:46:53 +0900 Subject: [Keyboard] add Radialex (#14949) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan Co-authored-by: takashicompany --- keyboards/takashicompany/radialex/readme.md | 31 +++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 keyboards/takashicompany/radialex/readme.md (limited to 'keyboards/takashicompany/radialex/readme.md') diff --git a/keyboards/takashicompany/radialex/readme.md b/keyboards/takashicompany/radialex/readme.md new file mode 100644 index 0000000000..1468e7b0b1 --- /dev/null +++ b/keyboards/takashicompany/radialex/readme.md @@ -0,0 +1,31 @@ +# Radialex + +![Radialex](https://github.com/takashicompany/radialex/blob/master/images/qmk.jpg?raw=true) + +40% larger keyboard. +The radial key layout allows you to place your hand in a natural position and move your fingers the shortest distance to type. +Your iconic keys and keycaps can be placed in the center of the keyboard. +It is possible to make it shine with LED backlighting. +The keyswitches can also be replaced with MX sockets. + +* Keyboard Maintainer: [takashicompany](https://github.com/yourusername) +* Hardware Supported: PCB, Pro Micro +* Hardware Availability: https://github.com/takashicompany/radialex + +Make example for this keyboard (after setting up your build environment): + + make takashicompany/radialex:default + +Flashing example for this keyboard: + + make takashicompany/radialex:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available -- cgit v1.2.3