From c83ff03a401e5de29871be7eb177746674956b19 Mon Sep 17 00:00:00 2001 From: takashicompany Date: Thu, 13 Jul 2023 00:17:04 +0900 Subject: [Keyboard] Add minidivide (#19870) Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Ryan Co-authored-by: Joel Challis Co-authored-by: Drashna Jaelre --- keyboards/takashicompany/minidivide/readme.md | 43 +++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 keyboards/takashicompany/minidivide/readme.md (limited to 'keyboards/takashicompany/minidivide/readme.md') diff --git a/keyboards/takashicompany/minidivide/readme.md b/keyboards/takashicompany/minidivide/readme.md new file mode 100644 index 0000000000..de49c2892b --- /dev/null +++ b/keyboards/takashicompany/minidivide/readme.md @@ -0,0 +1,43 @@ +# miniDivide + +![miniDivide](https://i.imgur.com/x91x9yjh.jpg) + +miniDivide is a split keyboard with 0.8u (16mm) key pitch. +The size of a single key is 80% of that of a conventional keyboard key. +Although the key size is more compact than usual, it has the advantage of requiring minimal finger movement. +The number of keys is 19 keys for one hand and 38 keys for two hands. + +It is small and thin, making it easy to carry around. +The option to mount a coin cell battery on the PCB is available so that the BLE Micro Pro can be installed. +OLED can also be mounted. + +miniDivideは0.8u(16mm)キーピッチの分割型のキーボードです。 +一つのキーの大きさが従来のキーボードのキーと比較すると80%のサイズとなっています。 +通常よりコンパクトなキーサイズですが、指の動きが最小限で済むという強みがあります。 +キー数は片手で19キー、両手で38キーとなります。 + +小さく、薄いので持ち運びにも便利です。 +またBLE Micro Proを搭載できるよう、コイン電池をPCBに搭載するオプションが可能です。 +OLEDも搭載できます。 + +* Keyboard Maintainer: [takashicompany](https://github.com/takashicompany) +* Hardware Supported: PCB, Pro Micro +* Hardware Availability: https://github.com/takashicompany/minidivide + +Make example for this keyboard (after setting up your build environment): + + make takashicompany/minidivide:default + +Flashing example for this keyboard: + + make takashicompany/minidivide:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available -- cgit v1.2.3