From e423d5e3d4059b3c16358fc5b6b2fe673f204f54 Mon Sep 17 00:00:00 2001 From: takashicompany Date: Tue, 4 Jul 2023 05:55:12 +0900 Subject: [Keyboard] Add Baumkuchen (#20766) Co-authored-by: Joel Challis Co-authored-by: Drashna Jaelre --- keyboards/takashicompany/baumkuchen/readme.md | 31 +++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 keyboards/takashicompany/baumkuchen/readme.md (limited to 'keyboards/takashicompany/baumkuchen/readme.md') diff --git a/keyboards/takashicompany/baumkuchen/readme.md b/keyboards/takashicompany/baumkuchen/readme.md new file mode 100644 index 0000000000..adc3f2e006 --- /dev/null +++ b/keyboards/takashicompany/baumkuchen/readme.md @@ -0,0 +1,31 @@ +# Baumkuchen + +![takashicompany/baumkuchen](https://i.imgur.com/NS39x44h.png) + +Baumkuchen is a 13-key macropad with a radial key layout. +The board can be used as a circuit or as a switch plate by cutting out the keyswitch Pro Micro part. +It is compatible with Cherry MX compatible keyswitches, and a rotary encoder can be optionally installed. +LEDs can also be mounted to make it glow. +The board is reversible, allowing you to choose the arrangement of keys and Pro Micro according to your usage style. + +* Keyboard Maintainer: [takashicompany](https://github.com/takashicompany) +* Hardware Supported: Baumkuchen PCB, Pro Micro +* Hardware Availability: https://github.com/takashicompany/baumkuchen + +Make example for this keyboard (after setting up your build environment): + + make takashicompany/baumkuchen:default + +Flashing example for this keyboard: + + make takashicompany/baumkuchen:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available -- cgit v1.2.3