From d1dfefc8971be50f85da4084a78de00a163c6482 Mon Sep 17 00:00:00 2001 From: christopherjanzen Date: Wed, 2 May 2018 12:57:33 -0500 Subject: Add cijanzen Pearl 40% keymap (#2878) * Add personal keymap for Pearl 40% * Updating readme and adding keymap image * Updated readme * Force make to use Python 3 * cleanup keymap * updated keymap image * update readme for new keymap image * reverting atmega32a_program * removed redundant sections of user config and rules * fixed user config file * fixed led indicators to properly show layer 4 --- keyboards/pearl/keymaps/cijanzen/README.md | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 keyboards/pearl/keymaps/cijanzen/README.md (limited to 'keyboards/pearl/keymaps/cijanzen/README.md') diff --git a/keyboards/pearl/keymaps/cijanzen/README.md b/keyboards/pearl/keymaps/cijanzen/README.md new file mode 100644 index 0000000000..745442955f --- /dev/null +++ b/keyboards/pearl/keymaps/cijanzen/README.md @@ -0,0 +1,29 @@ +# cijanzen's Pearl 40% + +## Layout + +The firmware offers five layers: + +1. Base layer +2. Numbers and arrows (Fn1) +3. F-row and navigation (Fn2) +4. Media and RGB controls (Fn3) +5. Utils (Fn2+Fn3) + +A few specifics worth mentioning: +- Autoshift has been enabled to allow for easier access of shifted keys +- Tab will operate as tab key on tap and fn layer on hold +- Indicator LEDs indicate the current layer + + +![cijanzen's Pearl 40% layout](https://raw.githubusercontent.com/christopherjanzen/qmk_firmware/bab090ee24866e6c38892ffc5ffa53813aec3832/keyboards/pearl/keymaps/cijanzen/pearl-cijanzen-keymap.jpg) + +Base for this firmware copied from jetpacktuxedo's and rask's QMK firmware + +--- + +## Compiling and flashing + +To compile and flash the HEX follow the [Pearl 40% instructions](https://gist.github.com/clee/a43f198a70de0e6dae22d7638b41440a). + +You might need to check the comments at the bottom of the gist as well. -- cgit v1.2.3