From 479139f9d4ef981a2f10918f0fb5a2c148ca0c8b Mon Sep 17 00:00:00 2001 From: Danny Nguyen Date: Thu, 3 Aug 2017 14:33:55 -0400 Subject: Fix location of where the make command should be run --- keyboards/nyquist/readme.md | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'keyboards/nyquist') diff --git a/keyboards/nyquist/readme.md b/keyboards/nyquist/readme.md index c70bf02576..61b9317d52 100644 --- a/keyboards/nyquist/readme.md +++ b/keyboards/nyquist/readme.md @@ -6,6 +6,8 @@ The Nyquist is a 60% split ortholinear board by [Keebio](https://keeb.io). It ha ## Build Guide +A build log of the Nyquist can be found here: [Nyquist Build Log](http://imgur.com/a/dD4sX). + Since the design is very similar to the Let's Split v2, the build guide for that can be used while the build guide for the Nyquist is being fully developed. A build guide for putting together the Let's Split v2 can be found here: [An Overly Verbose Guide to Building a Let's Split Keyboard](https://github.com/nicinabox/lets-split-guide) There is additional information there about flashing and adding RGB underglow. @@ -98,7 +100,7 @@ unnecessary in simple use cases. Flashing ------- -From the keymap directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing. +From the `nyquist` directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing. Example: `make rev1-serial-avrdude` -- cgit v1.2.3