From 168a63172010924a7a00dc1bc9e6a3c510e8ce5a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=E6=9D=8E=E8=91=A3=E7=9D=BF=E7=85=8A?= Date: Mon, 4 Jul 2022 02:07:31 +0800 Subject: Add support for MacroCat Keyboard (#17480) --- keyboards/macrocat/readme.md | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 keyboards/macrocat/readme.md (limited to 'keyboards/macrocat/readme.md') diff --git a/keyboards/macrocat/readme.md b/keyboards/macrocat/readme.md new file mode 100644 index 0000000000..42cf36dc16 --- /dev/null +++ b/keyboards/macrocat/readme.md @@ -0,0 +1,27 @@ +# macrocat + +![macrocat](https://i.imgur.com/ItLHGBfh.jpg) + +A cat like macro keyboard/numpad. + +* Keyboard Maintainer: [catmunch](https://github.com/catmunch) +* Hardware Supported: Fully Supported +* Hardware Availability: [MacroCat Keyboard](https://github.com/catmunch/macrocat) + +Make example for this keyboard (after setting up your build environment): + + make macrocat:default + +Flashing example for this keyboard: + + make macrocat:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Brand new atmega32u4 chip**: Plug the cable in, it will automatically boot into bootloader -- cgit v1.2.3