From 35a18a8bcd393bf17f4be326d8ef067ce6bfaf50 Mon Sep 17 00:00:00 2001 From: Albert Y <76888457+filterpaper@users.noreply.github.com> Date: Mon, 29 Nov 2021 16:18:33 +0800 Subject: [Keyboard] Code updates for macro3 (#15280) Co-authored-by: filterpaper --- keyboards/macro3/readme.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'keyboards/macro3/readme.md') diff --git a/keyboards/macro3/readme.md b/keyboards/macro3/readme.md index 66a142ecdf..0234741174 100644 --- a/keyboards/macro3/readme.md +++ b/keyboards/macro3/readme.md @@ -1,8 +1,8 @@ # Macro3 -![Macro3](https://github.com/davidphilipbarr/Macropads/raw/main/macro3/IMG_20200703_170424.jpg) +![Macro3](https://github.com/filterpaper/filterpaper.github.io/raw/main/images/macro3.png) -Macro3 is a low-profile macro pad with encoder support designed by [@davidphilipbarr](https://github.com/davidphilipbarr) using direct micro-controller pin wiring. +Macro3 is a low-profile macro pad with dual encoder support designed by [@davidphilipbarr](https://github.com/davidphilipbarr). ## Keyboard Info @@ -21,6 +21,6 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the top right key and plug in the controller. -* **Physical reset button**: Briefly press the reset button soldered on the PCB. * **Keycode in layout**: Press the key mapped to `RESET` if it is configured. +* **Physical reset pins**: Briefly short the RST and GND pins on the microcontroller using tweezers, a paperclip, or any other conductive material. -- cgit v1.2.3