From a12d58c6c965254bdf40ae0f02a6644e183eb17c Mon Sep 17 00:00:00 2001 From: Danny Date: Mon, 14 Mar 2022 14:08:10 -0400 Subject: [Keyboard] Add BAMFK-1 (#16409) Co-authored-by: Ryan --- keyboards/keebio/bamfk1/config.h | 113 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 113 insertions(+) create mode 100644 keyboards/keebio/bamfk1/config.h (limited to 'keyboards/keebio/bamfk1/config.h') diff --git a/keyboards/keebio/bamfk1/config.h b/keyboards/keebio/bamfk1/config.h new file mode 100644 index 0000000000..5cd86a9d16 --- /dev/null +++ b/keyboards/keebio/bamfk1/config.h @@ -0,0 +1,113 @@ +// Copyright 2021 Danny Nguyen (@nooges) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xCB10 +#define PRODUCT_ID 0x1111 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Keebio +#define PRODUCT BAMFK-1 + +/* key matrix size */ +#define MATRIX_ROWS 2 +#define MATRIX_COLS 4 + +/* + * Keyboard Matrix Assignments + */ + +#define DIRECT_PINS { \ + { E6, B6, D6, NO_PIN }, \ + { NO_PIN, NO_PIN, NO_PIN, NO_PIN } \ +} +#define AUDIO_PIN C6 +#ifdef AUDIO_ENABLE +# define STARTUP_SONG SONG(STARTUP_SOUND) +#endif + +#define ENCODERS_PAD_A { C7, D7 } +#define ENCODERS_PAD_B { B5, D4 } +#define ENCODERS 2 +#define ENCODERS_CW_KEY { { 1, 1 }, { 3, 1 } } +#define ENCODERS_CCW_KEY { { 0, 1 }, { 2, 1 } } + +#define RGB_DI_PIN D3 +#ifdef RGB_DI_PIN +# define RGBLED_NUM 16 +# define RGBLIGHT_HUE_STEP 8 +# define RGBLIGHT_SAT_STEP 8 +# define RGBLIGHT_VAL_STEP 8 +# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +# define RGBLIGHT_EFFECT_BREATHING +# define RGBLIGHT_EFFECT_RAINBOW_MOOD +# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +# define RGBLIGHT_EFFECT_SNAKE +# define RGBLIGHT_EFFECT_KNIGHT +# define RGBLIGHT_EFFECT_CHRISTMAS +# define RGBLIGHT_EFFECT_STATIC_GRADIENT +# define RGBLIGHT_EFFECT_RGB_TEST +# define RGBLIGHT_EFFECT_ALTERNATING +#endif +#define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_MODE_RAINBOW_SWIRL + 2) + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 -- cgit v1.2.3