From 46fe3b0cf562ff4b62b9a2f50598976ca02e2e2b Mon Sep 17 00:00:00 2001 From: Andy Tsai Date: Mon, 10 Oct 2022 01:37:25 -0700 Subject: [Keyboard] Add hardwareabstraction/handwire Board (#18504) Co-authored-by: Drashna Jaelre Co-authored-by: Tom Barnes --- keyboards/hardwareabstraction/handwire/readme.md | 27 ++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 keyboards/hardwareabstraction/handwire/readme.md (limited to 'keyboards/hardwareabstraction/handwire/readme.md') diff --git a/keyboards/hardwareabstraction/handwire/readme.md b/keyboards/hardwareabstraction/handwire/readme.md new file mode 100644 index 0000000000..0ba8940e50 --- /dev/null +++ b/keyboards/hardwareabstraction/handwire/readme.md @@ -0,0 +1,27 @@ +# Hardware Abstraction Handwire + +![handwire](https://i.imgur.com/PK5HfM3h.jpg) + +A hotswap 60% keyboard with an arrow key cluster. Board features support for an OLED screen, push pull solenoid, and an active buzzer. + +* Keyboard Maintainer: [Andy Tsai](https://github.com/cgmandy) +* Hardware Supported: ATMEGA32U4, Push-Pull Solenoid, Active Buzzer, SSD1306 128x32 OLED +* Hardware Availability: https://hardwareabstraction.com + +Make example for this keyboard (after setting up your build environment): + + make hardwareabstraction/handwire:default + +Flashing example for this keyboard: + + make hardwareabstraction/handwire:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the top left side of the PCB. You can alternatively short the two pads vertically with a pair of tweezers. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. This can be configured in VIA or on the QMK configurator. -- cgit v1.2.3