From 9581289745736ce068a1040f44cec37a2ca8830d Mon Sep 17 00:00:00 2001 From: lokher Date: Tue, 13 Sep 2022 11:24:05 +0800 Subject: Remove non-Keychron keyboards --- keyboards/handwired/xealous/config.h | 41 ----- .../handwired/xealous/keymaps/default/keymap.c | 98 ------------ keyboards/handwired/xealous/matrix.c | 50 ------- keyboards/handwired/xealous/readme.md | 166 --------------------- keyboards/handwired/xealous/rev1/config.h | 74 --------- keyboards/handwired/xealous/rev1/info.json | 89 ----------- keyboards/handwired/xealous/rev1/rev1.c | 2 - keyboards/handwired/xealous/rev1/rev1.h | 24 --- keyboards/handwired/xealous/rev1/rules.mk | 0 keyboards/handwired/xealous/rules.mk | 25 ---- 10 files changed, 569 deletions(-) delete mode 100644 keyboards/handwired/xealous/config.h delete mode 100644 keyboards/handwired/xealous/keymaps/default/keymap.c delete mode 100644 keyboards/handwired/xealous/matrix.c delete mode 100644 keyboards/handwired/xealous/readme.md delete mode 100644 keyboards/handwired/xealous/rev1/config.h delete mode 100644 keyboards/handwired/xealous/rev1/info.json delete mode 100644 keyboards/handwired/xealous/rev1/rev1.c delete mode 100644 keyboards/handwired/xealous/rev1/rev1.h delete mode 100644 keyboards/handwired/xealous/rev1/rules.mk delete mode 100644 keyboards/handwired/xealous/rules.mk (limited to 'keyboards/handwired/xealous') diff --git a/keyboards/handwired/xealous/config.h b/keyboards/handwired/xealous/config.h deleted file mode 100644 index 2502b4d196..0000000000 --- a/keyboards/handwired/xealous/config.h +++ /dev/null @@ -1,41 +0,0 @@ -/* -Copyright 2012 Jun Wako -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once -#include "config_common.h" - -/* Use I2C or Serial, not both */ -#define USE_I2C -#define SCL_CLOCK 800000UL - -/* Select hand configuration */ -#define MASTER_LEFT - -//#define DEBUG_MATRIX_SCAN_RATE //Use this to determine scan-rate. -#define FORCE_NKRO - -#define DIODE_DIRECTION COL2ROW - - -#ifdef AUDIO_ENABLE - #define AUDIO_PIN C6 - #define STARTUP_SONG SONG(STARTUP_SOUND) - #define NO_MUSIC_MODE - #define TONE_QWERTY SONG(Q__NOTE(_E4)); - #define TONE_NUMPAD SONG(Q__NOTE(_D4)); -#endif diff --git a/keyboards/handwired/xealous/keymaps/default/keymap.c b/keyboards/handwired/xealous/keymaps/default/keymap.c deleted file mode 100644 index c0ce72214d..0000000000 --- a/keyboards/handwired/xealous/keymaps/default/keymap.c +++ /dev/null @@ -1,98 +0,0 @@ -#include QMK_KEYBOARD_H - - - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _QWERTY 0 -#define _NUMPAD 1 -#define _FN 2 - -#define FN MO(_FN) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* - * ,-----------------------------------------------------------. - * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | - * |-----------------------------------------------------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | - * |-----------------------------------------------------------| - * |FN | A| S| D| F| G| H| J| K| L| ;| '|Return | - * |-----------------------------------------------------------| - * |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift | - * |-----------------------------------------------------------| - * |Ctrl|Gui |Alt | NUM | Space | Space |Alt |FN |Menu |Ctrl | - * `-----------------------------------------------------------' - */ - /* Layer 0: Qwerty */ - [_QWERTY] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - FN, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, - KC_LCTL, KC_LGUI, KC_LALT, DF(_NUMPAD), KC_SPC, KC_SPC, KC_RALT, FN, KC_APP, KC_RCTL - ), - -/* - * ,-----------------------------------------------------------. - * | | | | | | | |Nlck| /| *| -| | | | - * |-----------------------------------------------------------| - * | | | | | | | | 7| 8| 9| +| | | | - * |-----------------------------------------------------------| - * | | | | | | | | 4| 5| 6|Bspc| |Return | - * |-----------------------------------------------------------| - * | | | | | | | | 1| 2| 3| .| | - * |-----------------------------------------------------------| - * | | | | QWE | | 0 | . |A_ON |A_OFF| | - * `-----------------------------------------------------------' - */ - - /* Layer 1: Numpad */ - [_NUMPAD] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, KC_NLCK, KC_PSLS, KC_PAST, KC_MINUS, _______, _______, KC_BSPC, - _______, _______, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, KC_PLUS, _______, _______, KC_BSLS, - _______, _______, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_BSPC, _______, _______, - _______, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, KC_DOT, _______, - _______, _______, _______,DF(_QWERTY), _______, KC_P0, KC_PDOT, AU_ON, AU_OFF, _______ - ), - -/* - * ,-----------------------------------------------------------. - * | ` |F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| Delete| - * |-----------------------------------------------------------| - * | Caps|pUp| ^ |pDn| | | |pUp| ^ |pDn|PSR|SLK|Pau| | - * |-----------------------------------------------------------| - * | | < | v | > | |Hom|Hom| < | v | > |INS| DEL| | - * |-----------------------------------------------------------| - * | | | | | |End|End| |Vo-|Vo+|VoX| | - * |-----------------------------------------------------------| - * | | | | | | | | | | | - * `-----------------------------------------------------------' - */ - - /* Layer 2: RAISE */ - [_FN] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, - KC_CAPS, KC_PGUP, KC_UP, KC_PGDN, _______, _______, _______, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, _______, - _______, KC_LEFT, KC_DOWN,KC_RIGHT, _______, KC_HOME, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT, KC_INS, KC_DEL, _______, - _______, _______, _______, _______, _______, KC_END, KC_END, AU_TOG, KC_VOLD, KC_VOLU, KC_MUTE, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ) - -}; - -#ifdef AUDIO_ENABLE -float tone_qwerty[][2] = TONE_QWERTY; -float tone_numpad[][2] = TONE_NUMPAD; - -layer_state_t default_layer_state_set_kb(layer_state_t state) { - if (state == 1UL<<_QWERTY) { - PLAY_SONG(tone_qwerty); - } else if (state == 1UL<<_NUMPAD) { - PLAY_SONG(tone_numpad); - } - return state; -} -#endif diff --git a/keyboards/handwired/xealous/matrix.c b/keyboards/handwired/xealous/matrix.c deleted file mode 100644 index 46410b986d..0000000000 --- a/keyboards/handwired/xealous/matrix.c +++ /dev/null @@ -1,50 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -/* - * scan matrix - */ -#include -#include -#include -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "split_util.h" -#include "config.h" -#include "timer.h" - -// Copy this code to split_common/matrix.c, -// and call it instead of the unoptimized col_reader. Scan-rate jumps from 1200->1920 -// Also remove the sleep_us(30), not necessary for this keyboard. -// In usb_descriptor.c, set .PollingIntervalMS = 0x01 -#define ROW_SHIFTER ((uint8_t)1) -inline static matrix_row_t optimized_col_reader(void) { - //MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4 } - return (PINB & (1 << 6) ? 0 : (ROW_SHIFTER << 0)) | - (PINB & (1 << 2) ? 0 : (ROW_SHIFTER << 1)) | - (PINB & (1 << 3) ? 0 : (ROW_SHIFTER << 2)) | - (PINB & (1 << 1) ? 0 : (ROW_SHIFTER << 3)) | - (PINF & (1 << 7) ? 0 : (ROW_SHIFTER << 4)) | - (PINF & (1 << 6) ? 0 : (ROW_SHIFTER << 5)) | - (PINF & (1 << 5) ? 0 : (ROW_SHIFTER << 6)) | - (PINF & (1 << 4) ? 0 : (ROW_SHIFTER << 7)); -} - - diff --git a/keyboards/handwired/xealous/readme.md b/keyboards/handwired/xealous/readme.md deleted file mode 100644 index 14947cc90c..0000000000 --- a/keyboards/handwired/xealous/readme.md +++ /dev/null @@ -1,166 +0,0 @@ -XeaL60 -====== - -Split keyboard firmware for Arduino Pro Micro or other ATmega32u4 -based boards. - - -## Build Guide - -A build guide for putting together the Xealous can be found here: https://github.com/alex-ong/Split60 - - -## First Time Setup - -Download or clone the `qmk_firmware` repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using: - -``` -$ make handwired/xeal60/rev1:default -``` - -You will see a lot of output and if everything worked correctly you will see the built hex file: - -``` -handwired_xeal60_rev1_default.hex -``` - -If you would like to use one of the alternative keymaps, or create your own, copy one of the existing [keymaps](keymaps/) and run make like so: - - -``` -$ make handwired/xeal60/rev1:YOUR_KEYMAP_NAME -``` - -If everything worked correctly you will see a file: - -``` -handwired_xeal60_rev1_YOUR_KEYMAP_NAME.hex -``` - -For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/docs/faq_keymap.md) in the main readme.md. - - -Features --------- - -For the full Quantum Mechanical Keyboard feature list, see [the parent readme.md](/readme.md). - -Some features supported by the firmware: - -* Either half can connect to the computer via USB, or both halves can be used - independently. -* I2C connection between the two halves if for some - reason you require a faster connection between the two halves. Note this - requires an extra wire between halves and pull-up resistors on the data lines. - -Required Hardware ------------------ - -Apart from diodes and key switches for the keyboard matrix in each half, you -will need: - -* 2 Arduino Pro Micros. You can find these on AliExpress for ≈3.50USD each. -* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable - -Alternatively, you can use any sort of cable and socket that has at least 4 -wires. You will need a cable with at least 4 wires and 2x 4.7kΩ pull-up resistors - -Optional Hardware ------------------ - -A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`. - -Wiring ------- - -The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e. -PD0 on the ATmega32u4) between the two Pro Micros. - -Next, wire your key matrix to any of the remaining 17 IO pins of the pro micro -and modify the `matrix.c` accordingly. - -The wiring for serial: - -![serial wiring](https://i.imgur.com/C3D1GAQ.png) - - -Notes on Software Configuration -------------------------------- - -Configuring the firmware is similar to any other QMK project. One thing -to note is that `MATRIX_ROWS` in `config.h` is the total number of rows between -the two halves, i.e. if your split keyboard has 5 rows in each half, then use -`MATRIX_ROWS=10`. - -Also, the current implementation assumes a maximum of 8 columns, but it would -not be very difficult to adapt it to support more if required. - -Flashing -------- -From the top level `qmk_firmware` directory run `make KEYBOARD:KEYMAP:avrdude` for automatic serial port resolution and flashing. -Example: `make handwired/xeal60/rev1:default:avrdude` - - -Choosing which board to plug the USB cable into (choosing Master) --------- -Because the two boards are identical, the firmware has logic to differentiate the left and right board. - -It uses two strategies to figure things out: looking at the EEPROM (memory on the chip) or looking if the current board has the usb cable. - -The EEPROM approach requires additional setup (flashing the eeprom) but allows you to swap the usb cable to either side. - -The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra. - -### Setting the left hand as master -If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set. - -### Setting the right hand as master -If you always plug the usb cable into the right board, add an extra flag to your `config.h` -``` - #define MASTER_RIGHT -``` - -### Setting EE_hands to use either hands as master -If you define `EE_HANDS` in your `config.h`, you will need to set the -EEPROM for the left and right halves. - -The EEPROM is used to store whether the -half is left handed or right handed. This makes it so that the same firmware -file will run on both hands instead of having to flash left and right handed -versions of the firmware to each half. To flash the EEPROM file for the left -half run: -``` -avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:"./quantum/split_common/eeprom-lefthand.eep" -// or the equivalent in dfu-programmer - -``` -and similarly for right half -``` -avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:"./quantum/split_common/eeprom-righthand.eep" -// or the equivalent in dfu-programmer -``` - -NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`) - -After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash. - -Note that you need to program both halves, but you have the option of using -different keymaps for each half. You could program the left half with a QWERTY -layout and the right half with a Colemak layout using bootmagic's default layout option. -Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the -right half is connected. - - -Notes on Using Pro Micro 3.3V ------------------------------ - -Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects -the frequency on the 3.3V board. - -Also, if the slave board is producing weird characters in certain columns, -update the following line in `matrix.c` to the following: - -``` -// _delay_us(30); // without this wait read unstable value. -_delay_us(300); // without this wait read unstable value. -``` diff --git a/keyboards/handwired/xealous/rev1/config.h b/keyboards/handwired/xealous/rev1/config.h deleted file mode 100644 index 40fe502340..0000000000 --- a/keyboards/handwired/xealous/rev1/config.h +++ /dev/null @@ -1,74 +0,0 @@ -/* -Copyright 2012 Jun Wako -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 10 -#define MATRIX_COLS 8 - -// wiring of each half -// Ascii art of pro micro. Pin names PD3, PD2, etc. -//Usage| Name | Label Label| Name | Usage -// PORT -// | PD3 TX0 RAW | -// | PD2 RX1 GND |SerGnd -// | GND RESET | -// | GND VCC |SerVCc -// | PD1 2 A3 PF4 | Col7 -//Ser | PD0 3 A2 PF5 | Col6 -//Row4 | PD4 4 A1 PF6 | Col5 -//AUDIO| PC6 5 A0 PF7 | Col4 -//Row3 | PD7 6 15 PB1 | Col3 -//Row2 | PE6 7 14 PB3 | Col2 -//Row1 | PB4 8 13 PB2 | Col1 -//Row0 | PB5 9 10 PB6 | Col0 - -// Note reservation of C6 for audio -#define MATRIX_ROW_PINS { B5, B4, E6, D7, D4 } -#define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4 } - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -// #define BACKLIGHT_LEVELS 3 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -#define NO_ACTION_ONESHOT - -#define IGNORE_MOD_TAP_INTERRUPT diff --git a/keyboards/handwired/xealous/rev1/info.json b/keyboards/handwired/xealous/rev1/info.json deleted file mode 100644 index 59865e9321..0000000000 --- a/keyboards/handwired/xealous/rev1/info.json +++ /dev/null @@ -1,89 +0,0 @@ -{ - "keyboard_name": "XeaL60", - "manufacturer": "XeaLouS", - "url": "", - "maintainer": "alex-ong", - "usb": { - "vid": "0x4131", - "pid": "0x5141", - "device_version": "0.0.1" - }, - "layouts": { - "LAYOUT": { - "layout": [ - {"label":"Esc", "x":0, "y":0}, - {"label":"1", "x":1, "y":0}, - {"label":"2", "x":2, "y":0}, - {"label":"3", "x":3, "y":0}, - {"label":"4", "x":4, "y":0}, - {"label":"5", "x":5, "y":0}, - {"label":"6", "x":6, "y":0}, - - {"label":"7", "x":7, "y":0}, - {"label":"8", "x":8, "y":0}, - {"label":"9", "x":9, "y":0}, - {"label":"0", "x":10, "y":0}, - {"label":"-", "x":11, "y":0}, - {"label":"=", "x":12, "y":0}, - {"label":"Backspace", "x":13, "y":0, "w":2.0}, - - {"label":"Tab", "x":0, "y":1, "w":1.5}, - {"label":"Q", "x":1.5, "y":1}, - {"label":"W", "x":2.5, "y":1}, - {"label":"E", "x":3.5, "y":1}, - {"label":"R", "x": 4.5,"y":1}, - {"label":"T", "x":5.5, "y":1}, - - {"label":"Y", "x":6.5, "y":1}, - {"label":"U", "x":7.5, "y":1}, - {"label":"I", "x":8.5, "y":1}, - {"label":"O", "x":9.5, "y":1}, - {"label":"P", "x":10.5, "y":1}, - {"label":"[", "x":11.5, "y":1}, - {"label":"]", "x":12.5, "y":1}, - {"label":"\\", "x":13.5, "y":1, "w":1.5}, - - {"label":"CapsLock", "x":0, "y":2, "w":1.75}, - {"label":"A", "x":1.75, "y":2}, - {"label":"S", "x":2.75, "y":2}, - {"label":"D", "x":3.75, "y":2}, - {"label":"F", "x":4.75, "y":2}, - {"label":"G", "x":5.75, "y":2}, - - {"label":"H", "x":6.75, "y":2}, - {"label":"J", "x":7.75, "y":2}, - {"label":"K", "x":8.75, "y":2}, - {"label":"L", "x":9.75, "y":2}, - {"label":";", "x":10.75, "y":2}, - {"label":"'", "x":11.75, "y":2}, - {"label":"Enter", "x":12.75, "y":2, "w":2.25}, - - {"label":"Shift", "x":0, "y":3, "w":2.25}, - {"label":"Z", "x":2.25, "y":3}, - {"label":"X", "x":3.25, "y":3}, - {"label":"C", "x":4.25, "y":3}, - {"label":"V", "x":5.25, "y":3}, - {"label":"B", "x":6.25, "y":3}, - - {"label":"N", "x":7.25, "y":3}, - {"label":"M", "x":8.25, "y":3}, - {"label":",", "x":9.25, "y":3}, - {"label":".", "x":10.25, "y":3}, - {"label":"/", "x":11.25, "y":3}, - {"label":"Shift", "x":12.25, "y":3, "w":2.75}, - - {"label":"Ctrl", "x":0, "y":4, "w":1.25}, - {"label":"Win", "x":1.25, "y":4, "w":1.25}, - {"label":"Alt", "x":2.5, "y":4, "w":1.25}, - {"x":3.75, "y":4, "w":1.25}, - {"x":5, "y":4, "w":2.25}, - - {"x":7.25, "y":4, "w":2.75}, - {"label":"Alt", "x":10, "y":4, "w":1.25}, - {"label":"Win", "x":11.25, "y":4, "w":1.25}, - {"label":"Menu", "x":12.5, "y":4, "w":1.25}, - {"label":"Ctrl", "x":13.75, "y":4, "w":1.25} - ] - } - } -} diff --git a/keyboards/handwired/xealous/rev1/rev1.c b/keyboards/handwired/xealous/rev1/rev1.c deleted file mode 100644 index ad9f298c19..0000000000 --- a/keyboards/handwired/xealous/rev1/rev1.c +++ /dev/null @@ -1,2 +0,0 @@ -#include "quantum.h" -#include "rev1.h" diff --git a/keyboards/handwired/xealous/rev1/rev1.h b/keyboards/handwired/xealous/rev1/rev1.h deleted file mode 100644 index ce8d68c2c1..0000000000 --- a/keyboards/handwired/xealous/rev1/rev1.h +++ /dev/null @@ -1,24 +0,0 @@ -#pragma once - -#include "quantum.h" - -#define XXX KC_NO - -#define LAYOUT( \ - L00, L01, L02, L03, L04, L05, L06, R06, R05, R04, R03, R02, R01, R00, \ - L10, L11, L12, L13, L14, L15, R17, R16, R15, R14, R13, R12, R11, R10, \ - L20, L21, L22, L23, L24, L25, R26, R25, R24, R23, R22, R21, R20, \ - L30, L31, L32, L33, L34, L35, R35, R34, R33, R32, R31, R30, \ - L40, L41, L42, L43, L44, R44, R43, R42, R41, R40 \ -) { \ - { XXX, L06, L05, L04, L03, L02, L01, L00 }, \ - { XXX, XXX, L15, L14, L13, L12, L11, L10 }, \ - { XXX, XXX, L25, L24, L23, L22, L21, L20 }, \ - { XXX, XXX, L35, L34, L33, L32, L31, L30 }, \ - { XXX, XXX, XXX, L44, L43, L42, L41, L40 }, \ - { R00, R01, R02, R03, R04, R05, R06, XXX }, \ - { R10, R11, R12, R13, R14, R15, R16, R17 }, \ - { R20, R21, R22, R23, R24, R25, R26, XXX }, \ - { R30, R31, R32, R33, R34, R35, XXX, XXX }, \ - { R40, R41, R42, R43, R44, XXX, XXX, XXX } \ -} diff --git a/keyboards/handwired/xealous/rev1/rules.mk b/keyboards/handwired/xealous/rev1/rules.mk deleted file mode 100644 index e69de29bb2..0000000000 diff --git a/keyboards/handwired/xealous/rules.mk b/keyboards/handwired/xealous/rules.mk deleted file mode 100644 index 985ee385b9..0000000000 --- a/keyboards/handwired/xealous/rules.mk +++ /dev/null @@ -1,25 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Enable N-Key Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = yes # Audio output -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -SPLIT_KEYBOARD = yes # Use shared split_common code -SUBPROJECT_rev1 = yes - -SRC += matrix.c -DEBOUNCE_TYPE = sym_eager_pk - -DEFAULT_FOLDER = handwired/xealous/rev1 -- cgit v1.2.3