From 0338481090f4c2330a7fd237416cf66ba2bd4d22 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Wed, 29 Sep 2021 09:30:25 -0700 Subject: [Keyboard] Updates for Tractyl Manuform config (#14641) --- .../tractyl_manuform/5x6_right/f303/config.h | 104 +++++++++++++++++++++ 1 file changed, 104 insertions(+) create mode 100644 keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h (limited to 'keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h') diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h new file mode 100644 index 0000000000..f9a44587b0 --- /dev/null +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h @@ -0,0 +1,104 @@ +/* +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#define PRODUCT Tractyl Manuform(5x6) Proton C + +// wiring of each half +#define MATRIX_COL_PINS \ + { B0, B1, B2, B3, B4, B5 } +#define MATRIX_ROW_PINS \ + { B10, B11, B12, A14, A13, A15 } + +#define UNUSED_PINS \ + { A0, A2, A7, A8 } +// B2 used for BOOT1, has internal pull down? +// A9 has internal pull-down +// A11 and A12 are used for USB sense. DO NOT USE. + +#define DIODE_DIRECTION COL2ROW + +// #define USB_VBUS_PIN B10 +#define SPLIT_HAND_PIN C14 // high = left, low = right + +// WS2812 RGB LED strip input and number of LEDs +#define RGB_DI_PIN A6 +#define WS2812_PWM_DRIVER PWMD3 // default: PWMD2 +#define WS2812_PWM_CHANNEL 1 // default: 2 +#define WS2812_PWM_PAL_MODE 2 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 +//#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy). +// #define WS2812_DMA_STREAM STM32_DMA1_STREAM3 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +#define WS2812_DMA_CHANNEL 3 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. + +#define RGBLED_NUM 20 +#define RGBLIGHT_SPLIT +#define RGBLED_SPLIT \ + { 10, 10 } + +#define DEBUG_LED_PIN C13 + +/* Audio config */ +#define AUDIO_PIN A5 +#define AUDIO_PIN_ALT A4 +#define AUDIO_PIN_ALT_AS_NEGATIVE + +/* serial.c configuration for split keyboard */ +#define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode. +#define SERIAL_USART_TX_PIN A9 +#define SERIAL_USART_RX_PIN A10 +#define SERIAL_USART_DRIVER SD1 +#define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 +#define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 +#define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100 + +/* i2c config for oleds */ +#define I2C_DRIVER I2CD1 +#define I2C1_SCL_PIN B6 +#define I2C1_SDA_PIN B7 +#define I2C1_SCL_PAL_MODE 4 +#define I2C1_SDA_PAL_MODE 4 +#define I2C1_CLOCK_SPEED 400000 + +/* encoder config */ +#define ENCODERS_PAD_A \ + { A7 } +#define ENCODERS_PAD_B \ + { A8 } + +/* spi config for eeprom and pmw3360 sensor */ +#define SPI_DRIVER SPID2 +#define SPI_SCK_PIN B13 +#define SPI_SCK_PAL_MODE 5 +#define SPI_MOSI_PIN B15 +#define SPI_MOSI_PAL_MODE 5 +#define SPI_MISO_PIN B14 +#define SPI_MISO_PAL_MODE 5 + +/* eeprom config */ +#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN B8 +#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 8 +// #define EXTERNAL_EEPROM_BYTE_COUNT 8196 +// #define EXTERNAL_EEPROM_PAGE_SIZE 32 +// #define EXTERNAL_EEPROM_ADDRESS_SIZE 2 +// #define DEBUG_EEPROM_OUTPUT + +/* pmw3360 config */ +#define PMW3360_CS_PIN B9 +#define PMW3360_SPI_MODE 3 +#define PMW3360_SPI_DIVISOR 8 -- cgit v1.2.3