From ca6921b1ba422e4276e45062a115bec854864a90 Mon Sep 17 00:00:00 2001 From: Joe Scotto Date: Tue, 13 Jun 2023 02:17:18 -0400 Subject: [Keyboard] Add ScottoNum macropad (#21208) --- .../handwired/scottokeebs/scottonum/readme.md | 27 ++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 keyboards/handwired/scottokeebs/scottonum/readme.md (limited to 'keyboards/handwired/scottokeebs/scottonum/readme.md') diff --git a/keyboards/handwired/scottokeebs/scottonum/readme.md b/keyboards/handwired/scottokeebs/scottonum/readme.md new file mode 100644 index 0000000000..66cbff8060 --- /dev/null +++ b/keyboards/handwired/scottokeebs/scottonum/readme.md @@ -0,0 +1,27 @@ +# ScottoNum + +![ScottoNum](https://i.imgur.com/VMiA19uh.jpg) + +A 17-key macropad. Case files available [here](https://github.com/joe-scotto/scottokeebs). + +- Keyboard Maintainer: [Joe Scotto](https://github.com/joe-scotto) +- Hardware Supported: ATmega32U4 +- Hardware Availability: [Amazon](https://amazon.com) + +Make example for this keyboard (after setting up your build environment): + + make handwired/scottokeebs/scottonum:default + +Flashing example for this keyboard: + + make handwired/scottokeebs/scottonum:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +- **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +- **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +- **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available -- cgit v1.2.3