From c9159effc0b07b44d90ea92de625b9d338938eb2 Mon Sep 17 00:00:00 2001 From: noroadsleft <18669334+noroadsleft@users.noreply.github.com> Date: Fri, 7 Dec 2018 16:48:03 -0800 Subject: handwired/MS_sculpt_mobile Refactor, Configurator and cleanup (#4576) * handwired/MS_sculpt_mobile: refactor - layout macro KEYMAP renamed to LAYOUT - layout macro MATRIX_TESTING_KEYMAP renamed to MATRIX_TESTING_LAYOUT * handwired/MS_sculpt_mobile: Configurator support * handwired/MS_sculpt_mobile: readme cleanup * handwired/MS_sculpt_mobile: rename folder Renamed the directory to fully lowercase. * handwired/MS_sculpt_mobile: rename keyboard files Renamed the keyboard core files to fully lowercase. * handwired/ms_sculpt_mobile: keymap readme cleanup Capitalization fixes because I'm that guy. * handwired/ms_sculpt_mobile: keymap config.h fixes Keymap config.h files updated to use #pragma once * handwired/ms_sculpt_mobile: updated paths Fixing path references due to rename. --- keyboards/handwired/ms_sculpt_mobile/readme.md | 55 ++++++++++++++++++++++++++ 1 file changed, 55 insertions(+) create mode 100644 keyboards/handwired/ms_sculpt_mobile/readme.md (limited to 'keyboards/handwired/ms_sculpt_mobile/readme.md') diff --git a/keyboards/handwired/ms_sculpt_mobile/readme.md b/keyboards/handwired/ms_sculpt_mobile/readme.md new file mode 100644 index 0000000000..98fd1f8d1a --- /dev/null +++ b/keyboards/handwired/ms_sculpt_mobile/readme.md @@ -0,0 +1,55 @@ +# Microsoft Sculpt Mobile + +This is a way to take a Microsoft ergonomic bluetooth keyboard, and make it +into a hard-wired keyboard running QMK. + +The keyboard is known under several different names: +Mobile Bluetooth 5000, Mobile 6000, Sculpt mobile, and Asus rebranded. + +I had a stack of them, since they're cheap on ebay, travel well, and are just ergo enough. + +The ribbon cable is 1mm pitch, which is hard to hand solder. I bought a cheap set of +"pitch adapter" boards https://www.amazon.com/Double-Sided-0-4mm-1-0-Adapter-60mmx38mm/dp/B00OK42118 + +Cut the original ribbon cable sockets off the bluetooth board using a razor, they're hard to desolder. +They're also allow the cable to be inserted on top or bottom. + +If I was going to do it again, I'd make the MCU connection come out the top of the keyboard +and avoid the wires dangling out the bottom. + +As I was debugging the matrix, I started to get random failures. In desparation I tried a second MCU, +but had the same problems. It turns out that the ribbon cable connections can get worn. Shave a +half millimeter off the end of the ribbon cable & the errors go away. + +My method for discovering the matrix was to set up a LAYOUT macro that included all pins. +See MATRIX_TESTING_LAYOUT if you need it. Then set up a keymap that has all printable symbols +in the first 4 rows. test each key & record output. Then switch the printable symbols to the +bottom 4 rows & repeat. This was enough to show the matrix. + + +The full original keymap for the Sculpt is + +| | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | +|:-:|:--:|:--:|:--:|:---:|:---:|:---:|:----:|:----:|:----:|:-----:|:----:|:------:|:----:|:-----:|:----:|:------:|:----:|:---:| +| 0 | b | n | m | , | . | / | | | | Caps | | | | | | | | Fn | +| 1 | g | h | " | | | | | | | | Vol+ | Mute | RCtl | | Vol- | PgDn | LCtl | | +| 2 | 7 | 8 | 9 | 0 | Del | | PgUp | | | | | RShift | | | | LShift | | | +| 3 | p | [ | ] | \ | | | | | | | RAlt | | | | LAlt | | | | +| 4 | y | u | i | o | | | | | | | | | | LGUI | | | | | +| 5 | ~ | - | += | j | k | l | ; | 5 | 6 | Bksp | 1 | 2 | 3 | 4 | F4 | F5 | F6 | | +| 6 | a | s | d | q | w | e | Up | Left | Down | Right | | | | Space | F1 | F2 | F3 | Tab | +| 7 | F7 | F8 | F9 | F10 | F11 | F12 | | f | r | t | z | x | c | | v | Enter | Esc | | + +This works with 18 cols + 8 rows on a Teensy++, or ARM-based Teensy. + +The Astar mini has all pins exposed , so you can do 18x8 +If you want a speaker, LEDs, etc., you'll need to free up a pin. I recommend joining columns +R and L to the same pin. + +Building - add ASTAR=1 to the compile line or leave out for teensy2++ + +Make example for this keyboard (after setting up your build environment): + + make handwired/ms_sculpt_mobile:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). -- cgit v1.2.3