From 8ad12b1eb7cc196943b26a7becfdab209789cdc3 Mon Sep 17 00:00:00 2001 From: npoirey Date: Fri, 23 Jun 2017 23:59:30 +0200 Subject: Updated frenchdev readme --- keyboards/handwired/frenchdev/readme.md | 58 +++++++++++++++++++++++++++------ 1 file changed, 48 insertions(+), 10 deletions(-) (limited to 'keyboards/handwired/frenchdev') diff --git a/keyboards/handwired/frenchdev/readme.md b/keyboards/handwired/frenchdev/readme.md index 47e4ade16c..698b4befb2 100644 --- a/keyboards/handwired/frenchdev/readme.md +++ b/keyboards/handwired/frenchdev/readme.md @@ -1,18 +1,55 @@ -# My take on a splitted keyboard +# Frenchdev : My take on a splitted keyboard for dev and french language +Concept based on + - [ergodox](https://ergodox-ez.com/) + - [katy](https://deskthority.net/workshop-f7/katy-keyboard-or-k80cs-key80-contoured-split-t8524.html) -default layout : -[default layout](http://i.imgur.com/r2Nvr4p.png) +with the added possibility to connect up to 6 external switches like pedals, + and somewhat like the katy, not all keys are on the same level for easier reach. -the thing when finished : -http://imgur.com/a/6FY8v +###Photos +- [default layout](http://i.imgur.com/r2Nvr4p.png) +- [editable layout on keyboard layout editor](http://www.keyboard-layout-editor.com/#/gists/4480e3ab8026eb7c710a7e22203ef4aa) (keys placement is NOT precise on this) +- [the thing when finished](http://imgur.com/a/6FY8v) +- [concept and cardboard mockup](http://imgur.com/a/R0vvs) -concept and mockup: -http://imgur.com/a/R0vvs - -to build : +##Build instructions docker run --rm -e keymap=default -e keyboard=frenchdev --rm -v D:/Repositories/qmk:/qmk:rw edasque/qmk_firmware +##Laser-cuttable file +There is intentionnaly no hole for the TRRS connector, you are supposed to use a drill for it. +This way if you don't want to use the pedals you don't have a useless hole. Plus it's cleaner. +http://qmk.fm/frenchdev/frenchdev_v1_lasercut_template.svg + +##Side stickers +You can find my original file here : http://qmk.fm/frenchdev/example_printable_stickers.svg + +I used it when training but now I use blanks and the layout is different. +I still uploaded it because I think it can be a good jumpstart for any temporary stickers on the +side of keycaps. + +##List of parts +- I2C mcp23018 +- [teensy 2](https://www.pjrc.com/store/teensy.html) +- 3 LED, 5mm tall with flat head +- 3 330 ohm resistor +- 2 470 ohm resistor +- 2 TRRS connectors +- 1 [micro usb breakout board](http://www.ebay.com/itm/-/201387922085?) +- 88 cherry/gateron switchs +- 94 4148 diodes +- 34 R4 keys +- 14 R3 keys +- 20 R2 keys +- 22 R1 keys + +if you fancy adding pedals : +[these are good enough and cheap](https://www.amazon.fr/gp/product/B00V7WITKI/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1). You also need a RCA connector for each of those to replace the included cable + +If you (or your coworkers) find them too loud you can replace the switch inside them. +For once we don't really care about what's inside :) + +##Various indications The PHYSICAL rows and columns are connected as such : @@ -57,8 +94,9 @@ and on left hand (main) : | E6 GND | `------------------' -we use pull up resistor for SCL et VDA, see https://github.com/ErgoDox-EZ/docs/blob/master/ErgoDox%20EZ%20Schematic.pdf for example +We use pull up resistor for SCL and VDA, see https://github.com/ErgoDox-EZ/docs/blob/master/ErgoDox%20EZ%20Schematic.pdf for example the connector is a standard TRRS (jack with audio + mic) Diode direction is row to column + -- cgit v1.2.3