From c59212821918736504074da24f33108551e8bdde Mon Sep 17 00:00:00 2001 From: Yaroslav Smirnov Date: Thu, 19 Aug 2021 21:15:30 +0300 Subject: [Keyboard] Add Elrgo S to keyboards/handwired (#13893) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/handwired/elrgo_s/readme.md | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 keyboards/handwired/elrgo_s/readme.md (limited to 'keyboards/handwired/elrgo_s/readme.md') diff --git a/keyboards/handwired/elrgo_s/readme.md b/keyboards/handwired/elrgo_s/readme.md new file mode 100644 index 0000000000..5fb5ab6acb --- /dev/null +++ b/keyboards/handwired/elrgo_s/readme.md @@ -0,0 +1,28 @@ +# Elrgo S Split Keyboard + +This is a fork of the VOID Ergo S with QMK Configurator support. + +Elrgo S uses 2x Arduino Pro Micro (ATmega32U4) with 3D printed case. + +[Building guide, models for 3D printing](https://github.com/Eloren1/Elrgo_S) + +* Keyboard Maintainer: [Eloren](https://github.com/Eloren1) +* Hardware Supported: Arduino Pro Micro +* Hardware Availability: [Open Source](https://github.com/Eloren1/Elrgo_S) + +Make example for this keyboard (after setting up your build environment): + + make handwired/elrgo_s:default + +Flashing example for this keyboard: + + make handwired/elrgo_s:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 2 ways: + +* **Physical reset button**: Briefly press the button through the hole on the left side of the case. +* **Keycode in layout**: Press the key mapped to `RESET` if it is available -- cgit v1.2.3