From b20b3604042536640b5f29f85656cd55ef459180 Mon Sep 17 00:00:00 2001 From: Duncan Sutherland Date: Thu, 20 Jul 2023 21:03:23 +0100 Subject: Rename `dactyl_manuform` variant `3x5_3` (#21015) --- keyboards/handwired/dactyl_minidox/readme.md | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 keyboards/handwired/dactyl_minidox/readme.md (limited to 'keyboards/handwired/dactyl_minidox/readme.md') diff --git a/keyboards/handwired/dactyl_minidox/readme.md b/keyboards/handwired/dactyl_minidox/readme.md new file mode 100644 index 0000000000..5826403a80 --- /dev/null +++ b/keyboards/handwired/dactyl_minidox/readme.md @@ -0,0 +1,27 @@ +# Dactyl Minidox + +![DactylMinidox](https://i.imgur.com/PqjgeRfh.jpg) + +A 36 key (3x5+3), split bodied keyboard derived from the [Dactyl ManuForm](/keyboards/handwired/dactyl_manuform/). + +* Keyboard Maintainer: [Dan Ford](https://github.com/dlford) +* Hardware Supported: Pro Micro controller, or clone of +* Hardware Availability: [Build Guide](https://www.dlford.io/keyboard-build-guide-per-key-rgb-leds/) + +Make example for this keyboard (after setting up your build environment): + + make handwired/dactyl_minidox:default + +Flashing example for this keyboard: + + make handwired/dactyl_minidox:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available -- cgit v1.2.3