From 3097d06ec38a2239259ac27b7a6306b03668536f Mon Sep 17 00:00:00 2001 From: Duncan Sutherland Date: Mon, 3 Jul 2023 21:56:31 +0100 Subject: [Keyboard] Add dactyl_lightcycle (#20709) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/handwired/dactyl_lightcycle/readme.md | 40 +++++++++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 keyboards/handwired/dactyl_lightcycle/readme.md (limited to 'keyboards/handwired/dactyl_lightcycle/readme.md') diff --git a/keyboards/handwired/dactyl_lightcycle/readme.md b/keyboards/handwired/dactyl_lightcycle/readme.md new file mode 100644 index 0000000000..b351942f44 --- /dev/null +++ b/keyboards/handwired/dactyl_lightcycle/readme.md @@ -0,0 +1,40 @@ +# Dactyl Lightcycle + +![TopElev](https://i.imgur.com/MwPhTrCh.jpg) + +A handwired, split bodied, concave key-well, columnar keyboard. +The *Dactyl Lightcycle* is a variation of the [Dactyl](/keyboards/handwired/dactyl/) keyboard, its differences are: +1. Top (number) row removed +2. Five key thumb cluster; one less than the *Dactyl's* six + +This modernised rendition of the *Dactyl Lightcycle* requires two Pro Micro controllers, rather than the *Dactyl's* original implementation of a micro controller and I/O expander. + +* Keyboard Maintainer: [Matt Adereth](https://github.com/adereth/) +* Hardware Supported: 2x Pro Micro micro controller, or clone of +* Hardware Availability: Case files available on [GitHub](https://github.com/adereth/dactyl-keyboard), file names beginning "lightcycle" apply + +Make example for this keyboard (after setting up your build environment): + + make handwired/dactyl_lightcycle:default + +Flashing example for this keyboard: + + make handwired/dactyl_lightcycle:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in keymap**: Press the key mapped to `QK_BOOT` if it is available + +## QMK Layouts + +The following [community layouts](/layouts/) are supported: +| Layout | Diagram | +| :---: | :---: | +| Split_3x6_3 | ![split_3x6_3](https://i.imgur.com/xBVDsqE.jpg) | +| Split_3x5_3 | ![split_3x5_3](https://i.imgur.com/nc0dbH1.jpg) | -- cgit v1.2.3