From 8e8c0e2d57f7b07348ef3068726791296deb6c75 Mon Sep 17 00:00:00 2001 From: yiancar Date: Fri, 19 Aug 2022 20:47:45 +0100 Subject: Cyberstar Custom (#18076) * Create Cyberstar Custom Co-authored-by: yiancar --- keyboards/handwired/cyberstar/config.h | 94 ++++++++++++++++++++++++++++++++++ 1 file changed, 94 insertions(+) create mode 100644 keyboards/handwired/cyberstar/config.h (limited to 'keyboards/handwired/cyberstar/config.h') diff --git a/keyboards/handwired/cyberstar/config.h b/keyboards/handwired/cyberstar/config.h new file mode 100644 index 0000000000..755fa5b6c0 --- /dev/null +++ b/keyboards/handwired/cyberstar/config.h @@ -0,0 +1,94 @@ +/* +Copyright 2022 Yiancar-Designs + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published byß +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 18 + +#define MATRIX_ROW_PINS { A15, B3, A9, B5, A3 } +#define MATRIX_COL_PINS { A4, A5, A6, A7, B0, B1, B2, B10, B11, B12, B13, B14, B15, A8, A10, A14, B8, B9 } + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Ensure we jump to bootloader if the RESET keycode was pressed */ +#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE + +/* RGB Light */ +#define WS2812_PWM_DRIVER PWMD3 +#define WS2812_PWM_CHANNEL 1 +#define WS2812_PWM_PAL_MODE 1 +#define WS2812_DMA_STREAM STM32_DMA1_STREAM3 +#define WS2812_DMA_CHANNEL 3 +#define WS2812_BYTE_ORDER WS2812_BYTE_ORDER_RGB + +#define RGB_DI_PIN B4 +#define RGBLED_NUM 12 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* Bootmagic Lite key configuration */ +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 0 -- cgit v1.2.3