From cd682ad8b768db9f5c470d9de90ee158e72f6720 Mon Sep 17 00:00:00 2001 From: Ethan Johnston Date: Sun, 13 Nov 2022 10:58:56 +1000 Subject: [Keyboard] Add Handwired alcor dactyl (#18586) Co-authored-by: Ryan --- keyboards/handwired/alcor_dactyl/readme.md | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 keyboards/handwired/alcor_dactyl/readme.md (limited to 'keyboards/handwired/alcor_dactyl/readme.md') diff --git a/keyboards/handwired/alcor_dactyl/readme.md b/keyboards/handwired/alcor_dactyl/readme.md new file mode 100644 index 0000000000..3c18faf247 --- /dev/null +++ b/keyboards/handwired/alcor_dactyl/readme.md @@ -0,0 +1,28 @@ +# alcor_dactyl + +![alcor_dactyl](https://i.imgur.com/F0E1JCQh.jpg) + +This is a handwired dactyl manufor utalising an RP2040-zero + +* Keyboard Maintainer: [Ethan](https://github.com/rocketstrong) +* Hardware Supported: Waveshare RP2040-Zero +* Hardware Availability: https://www.waveshare.com/wiki/RP2040-Zero +* 3D Print File Source: https://dactyl.mbugert.de/manuform + +Make example for this keyboard (after setting up your build environment): + + make handwired/alcor_dactyl:default + +Flashing example for this keyboard: + + make handwired/alcor_dactyl:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available -- cgit v1.2.3