From ba42a5ae68a59ad514027d819c6b58ee86944e75 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Tue, 16 Jul 2019 17:26:38 +1000 Subject: Remove commented out MCUs in rules.mk (#5884) --- keyboards/exclusive/e6v2/le/rules.mk | 3 +-- keyboards/exclusive/e6v2/oe/rules.mk | 3 +-- keyboards/exclusive/e6v2/oe_bmc/rules.mk | 1 - 3 files changed, 2 insertions(+), 5 deletions(-) (limited to 'keyboards/exclusive/e6v2') diff --git a/keyboards/exclusive/e6v2/le/rules.mk b/keyboards/exclusive/e6v2/le/rules.mk index 7d28042d85..ffad52dbc5 100644 --- a/keyboards/exclusive/e6v2/le/rules.mk +++ b/keyboards/exclusive/e6v2/le/rules.mk @@ -1,5 +1,4 @@ # MCU name -#MCU = at90usb1287 MCU = atmega32u4 # Processor frequency. @@ -67,4 +66,4 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -LAYOUTS = 60_ansi \ No newline at end of file +LAYOUTS = 60_ansi diff --git a/keyboards/exclusive/e6v2/oe/rules.mk b/keyboards/exclusive/e6v2/oe/rules.mk index 7d28042d85..ffad52dbc5 100644 --- a/keyboards/exclusive/e6v2/oe/rules.mk +++ b/keyboards/exclusive/e6v2/oe/rules.mk @@ -1,5 +1,4 @@ # MCU name -#MCU = at90usb1287 MCU = atmega32u4 # Processor frequency. @@ -67,4 +66,4 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -LAYOUTS = 60_ansi \ No newline at end of file +LAYOUTS = 60_ansi diff --git a/keyboards/exclusive/e6v2/oe_bmc/rules.mk b/keyboards/exclusive/e6v2/oe_bmc/rules.mk index 885bce2453..a9156adeb5 100644 --- a/keyboards/exclusive/e6v2/oe_bmc/rules.mk +++ b/keyboards/exclusive/e6v2/oe_bmc/rules.mk @@ -1,5 +1,4 @@ # MCU name -#MCU = at90usb1286 MCU = atmega32a PROTOCOL = VUSB -- cgit v1.2.3 From de4a47f1cc28c4ef66e7560eac2a50f717070ae2 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Sat, 21 Sep 2019 15:06:32 +1000 Subject: Cleanup rules.mk for 32A and 328P keyboards (#6767) --- keyboards/exclusive/e6v2/le_bmc/rules.mk | 58 ++------------------------------ keyboards/exclusive/e6v2/oe_bmc/rules.mk | 58 ++------------------------------ 2 files changed, 6 insertions(+), 110 deletions(-) (limited to 'keyboards/exclusive/e6v2') diff --git a/keyboards/exclusive/e6v2/le_bmc/rules.mk b/keyboards/exclusive/e6v2/le_bmc/rules.mk index a9156adeb5..13a5f1b89a 100644 --- a/keyboards/exclusive/e6v2/le_bmc/rules.mk +++ b/keyboards/exclusive/e6v2/le_bmc/rules.mk @@ -1,46 +1,5 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB - -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 12000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -# ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -# F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS = -DDEBUG_LEVEL=0 - # Bootloader selection # Teensy halfkay @@ -48,20 +7,10 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # @@ -84,6 +33,5 @@ AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) +OPT_DEFS = -DDEBUG_LEVEL=0 SRC += i2c_master.c - -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/exclusive/e6v2/oe_bmc/rules.mk b/keyboards/exclusive/e6v2/oe_bmc/rules.mk index a9156adeb5..13a5f1b89a 100644 --- a/keyboards/exclusive/e6v2/oe_bmc/rules.mk +++ b/keyboards/exclusive/e6v2/oe_bmc/rules.mk @@ -1,46 +1,5 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB - -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 12000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -# ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -# F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS = -DDEBUG_LEVEL=0 - # Bootloader selection # Teensy halfkay @@ -48,20 +7,10 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # @@ -84,6 +33,5 @@ AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) +OPT_DEFS = -DDEBUG_LEVEL=0 SRC += i2c_master.c - -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex -- cgit v1.2.3 From e8b65d01709c2ebdf50c0aa95963d200fa4fa4c6 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Sun, 6 Oct 2019 05:09:35 +1100 Subject: Cleanup rules.mk for 32U4 keyboards, A-F (#6804) * Cleanup rules.mk for 32U4 keyboards, A-F * Put back stuff in VIA keymaps --- keyboards/exclusive/e6v2/le/rules.mk | 54 ++++++------------------------------ keyboards/exclusive/e6v2/oe/rules.mk | 54 ++++++------------------------------ 2 files changed, 18 insertions(+), 90 deletions(-) (limited to 'keyboards/exclusive/e6v2') diff --git a/keyboards/exclusive/e6v2/le/rules.mk b/keyboards/exclusive/e6v2/le/rules.mk index ffad52dbc5..e6cad94033 100644 --- a/keyboards/exclusive/e6v2/le/rules.mk +++ b/keyboards/exclusive/e6v2/le/rules.mk @@ -1,51 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable diff --git a/keyboards/exclusive/e6v2/oe/rules.mk b/keyboards/exclusive/e6v2/oe/rules.mk index ffad52dbc5..e6cad94033 100644 --- a/keyboards/exclusive/e6v2/oe/rules.mk +++ b/keyboards/exclusive/e6v2/oe/rules.mk @@ -1,51 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable -- cgit v1.2.3 From efa28d0f5cca55b0dfecaddd0860ec3dfeab8bb0 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Tue, 5 Nov 2019 11:05:03 +1100 Subject: Convert some PS2AVRGB boards to I2C WS2812 driver (#7241) * Convert some PS2AVRGB boards to I2C WS2812 driver * Fix Travis failure for bface --- keyboards/exclusive/e6v2/le_bmc/le_bmc.c | 51 +++----------------------- keyboards/exclusive/e6v2/le_bmc/rules.mk | 3 +- keyboards/exclusive/e6v2/oe_bmc/oe_bmc.c | 63 ++++---------------------------- keyboards/exclusive/e6v2/oe_bmc/rules.mk | 3 +- 4 files changed, 14 insertions(+), 106 deletions(-) (limited to 'keyboards/exclusive/e6v2') diff --git a/keyboards/exclusive/e6v2/le_bmc/le_bmc.c b/keyboards/exclusive/e6v2/le_bmc/le_bmc.c index 5f7ef25b22..e3b81c81ba 100644 --- a/keyboards/exclusive/e6v2/le_bmc/le_bmc.c +++ b/keyboards/exclusive/e6v2/le_bmc/le_bmc.c @@ -13,49 +13,8 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#include "rgblight.h" -#include "i2c_master.h" -#include "quantum.h" -#ifdef RGBLIGHT_ENABLE -extern rgblight_config_t rgblight_config; - -void rgblight_set(void) { - if (!rgblight_config.enable) { - for (uint8_t i = 0; i < RGBLED_NUM; i++) { - led[i].r = 0; - led[i].g = 0; - led[i].b = 0; - } - } - - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); -} -#endif - -void matrix_init_kb(void) { -#ifdef RGBLIGHT_ENABLE - if (rgblight_config.enable) { - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); - } -#endif - // call user level keymaps, if any - matrix_init_user(); -} - -void matrix_scan_kb(void) { -#ifdef RGBLIGHT_ENABLE - rgblight_task(); -#endif - matrix_scan_user(); - /* Nothing else for now. */ -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} +#include "le_bmc.h" void backlight_init_ports(void) { // initialize pins D0, D1, D4 and D6 as output @@ -72,17 +31,17 @@ void backlight_init_ports(void) { } void backlight_set(uint8_t level) { - if (level == 0) { + if (level == 0) { // turn backlight LEDs off writePinLow(D0); writePinLow(D1); writePinLow(D4); writePinLow(D6); - } else { + } else { // turn backlight LEDs on writePinHigh(D0); writePinHigh(D1); writePinHigh(D4); writePinHigh(D6); - } -} \ No newline at end of file + } +} diff --git a/keyboards/exclusive/e6v2/le_bmc/rules.mk b/keyboards/exclusive/e6v2/le_bmc/rules.mk index 13a5f1b89a..106044ba72 100644 --- a/keyboards/exclusive/e6v2/le_bmc/rules.mk +++ b/keyboards/exclusive/e6v2/le_bmc/rules.mk @@ -24,7 +24,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_CUSTOM_DRIVER = yes +WS2812_DRIVER = i2c RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode @@ -34,4 +34,3 @@ FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) OPT_DEFS = -DDEBUG_LEVEL=0 -SRC += i2c_master.c diff --git a/keyboards/exclusive/e6v2/oe_bmc/oe_bmc.c b/keyboards/exclusive/e6v2/oe_bmc/oe_bmc.c index 5357550ae1..97d354653f 100644 --- a/keyboards/exclusive/e6v2/oe_bmc/oe_bmc.c +++ b/keyboards/exclusive/e6v2/oe_bmc/oe_bmc.c @@ -13,57 +13,8 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#include "oe_bmc.h" -#include "rgblight.h" -#include "i2c_master.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - led_set_user(usb_led); -} - -#ifdef RGBLIGHT_ENABLE -extern rgblight_config_t rgblight_config; - -void rgblight_set(void) { - if (!rgblight_config.enable) { - for (uint8_t i = 0; i < RGBLED_NUM; i++) { - led[i].r = 0; - led[i].g = 0; - led[i].b = 0; - } - } - - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); -} -#endif - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} +#include "oe_bmc.h" void backlight_init_ports(void) { // initialize pins D0, D1, D4 and D6 as output @@ -72,7 +23,7 @@ void backlight_init_ports(void) { setPinOutput(D4); setPinOutput(D6); - // turn RGB LEDs on + // turn backlight LEDs on writePinHigh(D0); writePinHigh(D1); writePinHigh(D4); @@ -80,17 +31,17 @@ void backlight_init_ports(void) { } void backlight_set(uint8_t level) { - if (level == 0) { - // turn RGB LEDs off + if (level == 0) { + // turn backlight LEDs off writePinLow(D0); writePinLow(D1); writePinLow(D4); writePinLow(D6); - } else { - // turn RGB LEDs on + } else { + // turn backlight LEDs on writePinHigh(D0); writePinHigh(D1); writePinHigh(D4); writePinHigh(D6); - } + } } diff --git a/keyboards/exclusive/e6v2/oe_bmc/rules.mk b/keyboards/exclusive/e6v2/oe_bmc/rules.mk index 13a5f1b89a..106044ba72 100644 --- a/keyboards/exclusive/e6v2/oe_bmc/rules.mk +++ b/keyboards/exclusive/e6v2/oe_bmc/rules.mk @@ -24,7 +24,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_CUSTOM_DRIVER = yes +WS2812_DRIVER = i2c RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode @@ -34,4 +34,3 @@ FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) OPT_DEFS = -DDEBUG_LEVEL=0 -SRC += i2c_master.c -- cgit v1.2.3 From 30473357290747be06e9200a7d9c751738a3b0a1 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Fri, 15 Nov 2019 10:21:22 +1100 Subject: =?UTF-8?q?Add=20support=20for=20configurable=20polling=20interval?= =?UTF-8?q?=20and=20power=20usage=20o=E2=80=A6=20(#7336)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit * Add support for custom polling interval and power usage on V-USB boards * Use 1ms as default for now --- keyboards/exclusive/e6v2/le_bmc/usbconfig.h | 10 ---------- keyboards/exclusive/e6v2/oe_bmc/usbconfig.h | 10 ---------- 2 files changed, 20 deletions(-) (limited to 'keyboards/exclusive/e6v2') diff --git a/keyboards/exclusive/e6v2/le_bmc/usbconfig.h b/keyboards/exclusive/e6v2/le_bmc/usbconfig.h index f22f2b631d..30c5f55ebc 100644 --- a/keyboards/exclusive/e6v2/le_bmc/usbconfig.h +++ b/keyboards/exclusive/e6v2/le_bmc/usbconfig.h @@ -108,20 +108,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/exclusive/e6v2/oe_bmc/usbconfig.h b/keyboards/exclusive/e6v2/oe_bmc/usbconfig.h index f22f2b631d..30c5f55ebc 100644 --- a/keyboards/exclusive/e6v2/oe_bmc/usbconfig.h +++ b/keyboards/exclusive/e6v2/oe_bmc/usbconfig.h @@ -108,20 +108,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of -- cgit v1.2.3 From 519df78cdbf7211b9e1ac6b961b0e10bb5164914 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Fri, 15 Nov 2019 10:21:53 +1100 Subject: Set device version from config.h for V-USB boards (#7316) --- keyboards/exclusive/e6v2/le_bmc/usbconfig.h | 2 +- keyboards/exclusive/e6v2/oe_bmc/usbconfig.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'keyboards/exclusive/e6v2') diff --git a/keyboards/exclusive/e6v2/le_bmc/usbconfig.h b/keyboards/exclusive/e6v2/le_bmc/usbconfig.h index 30c5f55ebc..7a1471a06f 100644 --- a/keyboards/exclusive/e6v2/le_bmc/usbconfig.h +++ b/keyboards/exclusive/e6v2/le_bmc/usbconfig.h @@ -227,7 +227,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'E', 'x', 'c', 'l', 'u', 's', 'i', 'v', 'e' diff --git a/keyboards/exclusive/e6v2/oe_bmc/usbconfig.h b/keyboards/exclusive/e6v2/oe_bmc/usbconfig.h index 30c5f55ebc..7a1471a06f 100644 --- a/keyboards/exclusive/e6v2/oe_bmc/usbconfig.h +++ b/keyboards/exclusive/e6v2/oe_bmc/usbconfig.h @@ -227,7 +227,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'E', 'x', 'c', 'l', 'u', 's', 'i', 'v', 'e' -- cgit v1.2.3