From b4b34cd2cd4a1c6bbb6c9990fdd48f239d931af7 Mon Sep 17 00:00:00 2001 From: Ryan Date: Sat, 11 Jun 2022 08:24:29 +1000 Subject: Wasdat: move some stuff to info.json (#17327) --- keyboards/evyd13/wasdat/config.h | 86 ---------------------------------------- 1 file changed, 86 deletions(-) (limited to 'keyboards/evyd13/wasdat/config.h') diff --git a/keyboards/evyd13/wasdat/config.h b/keyboards/evyd13/wasdat/config.h index e151496aed..821cc26b65 100644 --- a/keyboards/evyd13/wasdat/config.h +++ b/keyboards/evyd13/wasdat/config.h @@ -19,13 +19,6 @@ along with this program. If not, see . #include "config_common.h" -/* USB Device descriptor parameter */ -#define VENDOR_ID 0x4705 -#define PRODUCT_ID 0xC474 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Evyd13 -#define PRODUCT Wasdat - /* key matrix size */ #define MATRIX_ROWS 8 #define MATRIX_COLS 16 @@ -46,87 +39,8 @@ along with this program. If not, see . #define SN74X138_ADDRESS_PINS { D2, D1, D0 } -// For QMK DFU -#define QMK_ESC_OUTPUT D6 -#define QMK_ESC_INPUT D7 -#define QMK_LED B0 - -#define LED_NUM_LOCK_PIN B2 -#define LED_CAPS_LOCK_PIN B0 -#define LED_SCROLL_LOCK_PIN B1 #define LED_PIN_ON_STATE 0 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// /*== all animations enable ==*/ -// #define RGBLIGHT_ANIMATIONS -// /*== or choose animations ==*/ -// #define RGBLIGHT_EFFECT_BREATHING -// #define RGBLIGHT_EFFECT_RAINBOW_MOOD -// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL -// #define RGBLIGHT_EFFECT_SNAKE -// #define RGBLIGHT_EFFECT_KNIGHT -// #define RGBLIGHT_EFFECT_CHRISTMAS -// #define RGBLIGHT_EFFECT_STATIC_GRADIENT -// #define RGBLIGHT_EFFECT_RGB_TEST -// #define RGBLIGHT_EFFECT_ALTERNATING -// /*== customize breathing effect ==*/ -// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -// /*==== use exp() and sin() ====*/ -// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. -- cgit v1.2.3