From d2ff66a985b938e87fffe55c1d9f1dc55e356f91 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Wed, 23 Aug 2017 22:29:07 -0400 Subject: Creates a layouts/ folder for keymaps shared between keyboards (#1609) * include variables and .h files as pp directives * start layout compilation * split ergodoxes up * don't compile all layouts for everything * might seg fault * reset layouts variable * actually reset layouts * include rules.mk instead * remove includes from rules.mk * update variable setting * load visualizer from path * adds some more examples * adds more layouts * more boards added * more boards added * adds documentation for layouts * use lowercase names for LAYOUT_ * add layout.json files for each layout * add community folder, default keymaps for layouts * touch-up default layouts * touch-up layouts, some keyboard rules.mk * update documentation for layouts * fix up serial/i2c switches --- keyboards/ergodox/infinity/MEMO.txt | 385 ------------------ keyboards/ergodox/infinity/Makefile | 3 - keyboards/ergodox/infinity/board_is31fl3731c.h | 110 ------ keyboards/ergodox/infinity/board_st7565.h | 113 ------ keyboards/ergodox/infinity/bootloader_defs.h | 1 - keyboards/ergodox/infinity/chconf.h | 524 ------------------------- keyboards/ergodox/infinity/config.h | 75 ---- keyboards/ergodox/infinity/gfxconf.h | 27 -- keyboards/ergodox/infinity/halconf.h | 353 ----------------- keyboards/ergodox/infinity/infinity.c | 195 --------- keyboards/ergodox/infinity/infinity.h | 121 ------ keyboards/ergodox/infinity/led.c | 26 -- keyboards/ergodox/infinity/matrix.c | 173 -------- keyboards/ergodox/infinity/mcuconf.h | 74 ---- keyboards/ergodox/infinity/rules.mk | 75 ---- keyboards/ergodox/infinity/simple_visualizer.h | 123 ------ keyboards/ergodox/infinity/visualizer.c | 329 ---------------- 17 files changed, 2707 deletions(-) delete mode 100644 keyboards/ergodox/infinity/MEMO.txt delete mode 100644 keyboards/ergodox/infinity/Makefile delete mode 100644 keyboards/ergodox/infinity/board_is31fl3731c.h delete mode 100644 keyboards/ergodox/infinity/board_st7565.h delete mode 100644 keyboards/ergodox/infinity/bootloader_defs.h delete mode 100644 keyboards/ergodox/infinity/chconf.h delete mode 100644 keyboards/ergodox/infinity/config.h delete mode 100644 keyboards/ergodox/infinity/gfxconf.h delete mode 100644 keyboards/ergodox/infinity/halconf.h delete mode 100644 keyboards/ergodox/infinity/infinity.c delete mode 100644 keyboards/ergodox/infinity/infinity.h delete mode 100644 keyboards/ergodox/infinity/led.c delete mode 100644 keyboards/ergodox/infinity/matrix.c delete mode 100644 keyboards/ergodox/infinity/mcuconf.h delete mode 100644 keyboards/ergodox/infinity/rules.mk delete mode 100644 keyboards/ergodox/infinity/simple_visualizer.h delete mode 100644 keyboards/ergodox/infinity/visualizer.c (limited to 'keyboards/ergodox/infinity') diff --git a/keyboards/ergodox/infinity/MEMO.txt b/keyboards/ergodox/infinity/MEMO.txt deleted file mode 100644 index e2886aa002..0000000000 --- a/keyboards/ergodox/infinity/MEMO.txt +++ /dev/null @@ -1,385 +0,0 @@ -flabbergast's TMK/ChibiOS port -============================== -2015/10/16 - - -Build ------ -$ git clone -b chibios https://github.com/flabbergast/tmk_keyboard.git - -$ cd tmk_keyboard -$ git submodule add -f -b kinetis https://github.com/flabbergast/ChibiOS.git tmk_core/tool/chibios/chibios -or -$ cd tmk_keyboard/tmk_core/tool/chibios -$ git clone -b kinetis https://github.com/flabbergast/ChibiOS.git tmk_core/tool/chibios/chibios - -$ cd tmk_keyboard/keyboard/infinity_chibios -$ make - - - - -Chibios Configuration ---------------------- -halconf.h: for HAL configuration - placed in project directory - read in chibios/os/hal/hal.mk - included in chibios/os/hal/include/hal.h -mcuconf.h: for MCU configuration - placed in project directory - included in halconf.h - - -Chibios Term ------------- -PAL = Port Abstraction Layer - palWritePad - palReadPad - palSetPad - chibios/os/hal/include/pal.h - -LLD = Low Level Driver - - -Makefile --------- - # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = KINETIS - MCU_SERIES = KL2x - - # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ - # or /ld/ - MCU_LDSCRIPT = MKL26Z64 - - # - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP = kl2x - - # Board: it should exist either in /os/hal/boards/ - # or /boards - BOARD = PJRC_TEENSY_LC - - MCU = cortex-m0 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 6 - - -halconf.h ---------- - - -mcuconf.h ---------- - - -chconf.h --------- - - -ld script ---------- ---- ../../tmk_core/tool/chibios/chibios/os/common/ports/ARMCMx/compilers/GCC/ld/MKL26Z64.ld 2015-10-15 09:08:58.732904304 +0900 -+++ ld/MKL26Z64.ld 2015-10-15 08:48:06.430215496 +0900 -@@ -27,7 +27,8 @@ - { - flash0 : org = 0x00000000, len = 0xc0 - flashcfg : org = 0x00000400, len = 0x10 -- flash : org = 0x00000410, len = 64k - 0x410 -+ flash : org = 0x00000410, len = 62k - 0x410 -+ eeprom_emu : org = 0x0000F800, len = 2k - ram : org = 0x1FFFF800, len = 8k - } - -@@ -35,6 +36,10 @@ - __ram_size__ = LENGTH(ram); - __ram_end__ = __ram_start__ + __ram_size__; - -+__eeprom_workarea_start__ = ORIGIN(eeprom_emu); -+__eeprom_workarea_size__ = LENGTH(eeprom_emu); -+__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__; -+ - SECTIONS - { - . = 0; - - - -Configuration/Startup for Infinity 60% --------------------------------------- -Configuration: - - -Clock: -Inifinity - FEI(FLL Engaged Internal) mode with core clock:48MHz, bus clock:48MHz, flash clock:24MHz - Clock dividor: - SIM_CLKDIV1[OUTDIV1] = 0 divide-by-1 for core clock - SIM_CLKDIV1[OUTDIV2] = 0 divide-by-1 for bus clock - SIM_CLKDIV1[OUTDIV4] = 1 divide-by-2 for flash clock - Internal reference clock: - MCG_C1[IREFS] = 1 Internal Reference Select for clock source for FLL - MCG_C1[IRCLKEN] = 1 Internal Reference Clock Enable - FLL multipilication: - MCG_C4[DMX32] = 1 - MCG_C4[DRST_DRS] = 01 FLL factor 1464 * 32.768kHz = 48MHz - -chibios/os/hal/ports/KINETIS/K20x/hal_lld.c - k20x_clock_init(): called in __early_init() defined in board.c - disable watchdog and configure clock - - configurable macros: - KINETIS_NO_INIT: whether init or not - KINETIS_MCG_MODE: clock mode - KINETIS_MCG_MODE_FEI - KINETIS_MCG_MODE_PEE - hal/ports/KINETIS/K20x/hal_lld.h - - -chibios/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.h - PALConfig pal_default_config - boardInit() - __early_init() - macro definitions for board infos, freq and mcu type - -chibios/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.c - -USB - - -Startup -------- - common/ports/ARMCMx/GCC/crt0_v[67]m.s - Reset_Handler: startup code - common/ports/ARMCMx/GCC/crt1.c - __core_init(): weak - __early_init(): weak - __late_init(): weak - __default_exit(): weak - called from Reset_Handler of crt0 - common/ports/ARMCMx/GCC/vector.c - common/ports/ARMCMx/GCC/ld/*.ld - -chibios/os/common/ports/ARMCMx/compilers/GCC/ -├── crt0_v6m.s -├── crt0_v7m.s -├── crt1.c -├── ld -│   ├── MK20DX128BLDR3.ld -│   ├── MK20DX128BLDR4.ld -│   ├── MK20DX128.ld -│   ├── MK20DX256.ld -│   ├── MKL25Z128.ld -│   ├── MKL26Z128.ld -│   ├── MKL26Z64.ld -│   └── STM32L476xG.ld -├── mk -│   ├── startup_k20x5.mk -│   ├── startup_k20x7.mk -│   ├── startup_k20x.mk -│   ├── startup_kl2x.mk -│   └── startup_stm32l4xx.mk -├── rules.ld -├── rules.mk -└── vectors.c - -chibios/os/hal/ -├── boards -│   ├── FREESCALE_FREEDOM_K20D50M -│   │   ├── board.c -│   │   ├── board.h -│   │   └── board.mk -│   ├── MCHCK_K20 -│   │   ├── board.c -│   │   ├── board.h -│   │   └── board.mk -│   ├── PJRC_TEENSY_3 -│   │   ├── board.c -│   │   ├── board.h -│   │   └── board.mk -│   ├── PJRC_TEENSY_3_1 -│   │   ├── board.c -│   │   ├── board.h -│   │   └── board.mk -│   ├── PJRC_TEENSY_LC -│   │   ├── board.c -│   │   ├── board.h -│   │   └── board.mk -│   ├── readme.txt -│   ├── simulator -│   │   ├── board.c -│   │   ├── board.h -│   │   └── board.mk -│   ├── ST_NUCLEO_F030R8 -│   │   ├── board.c -│   │   ├── board.h -│   │   ├── board.mk -│   │   └── cfg -│   │   └── board.chcfg -├── hal.mk -├── include -│   ├── adc.h -│   ├── can.h -│   ├── dac.h -│   ├── ext.h -│   ├── gpt.h -│   ├── hal_channels.h -│   ├── hal_files.h -│   ├── hal.h -│   ├── hal_ioblock.h -│   ├── hal_mmcsd.h -│   ├── hal_queues.h -│   ├── hal_streams.h -│   ├── i2c.h -│   ├── i2s.h -│   ├── icu.h -│   ├── mac.h -│   ├── mii.h -│   ├── mmc_spi.h -│   ├── pal.h -│   ├── pwm.h -│   ├── rtc.h -│   ├── sdc.h -│   ├── serial.h -│   ├── serial_usb.h -│   ├── spi.h -│   ├── st.h -│   ├── uart.h -│   └── usb.h -├── lib -│   └── streams -│   ├── chprintf.c -│   ├── chprintf.h -│   ├── memstreams.c -│   ├── memstreams.h -│   ├── nullstreams.c -│   └── nullstreams.h -├── osal -│   ├── nil -│   │   ├── osal.c -│   │   ├── osal.h -│   │   └── osal.mk -│   ├── os-less -│   │   └── ARMCMx -│   │   ├── osal.c -│   │   ├── osal.h -│   │   └── osal.mk -│   └── rt -│   ├── osal.c -│   ├── osal.h -│   └── osal.mk -├── ports -│   ├── AVR -│   ├── common -│   │   └── ARMCMx -│   │   ├── mpu.h -│   │   ├── nvic.c -│   │   └── nvic.h -│   ├── KINETIS -│   │   ├── K20x -│   │   │   ├── hal_lld.c -│   │   │   ├── hal_lld.h -│   │   │   ├── kinetis_registry.h -│   │   │   ├── platform.dox -│   │   │   ├── platform.mk -│   │   │   ├── pwm_lld.c -│   │   │   ├── pwm_lld.h -│   │   │   ├── spi_lld.c -│   │   │   └── spi_lld.h -│   │   ├── KL2x -│   │   │   ├── hal_lld.c -│   │   │   ├── hal_lld.h -│   │   │   ├── kinetis_registry.h -│   │   │   ├── platform.mk -│   │   │   ├── pwm_lld.c -│   │   │   └── pwm_lld.h -│   │   ├── LLD -│   │   │   ├── adc_lld.c -│   │   │   ├── adc_lld.h -│   │   │   ├── ext_lld.c -│   │   │   ├── ext_lld.h -│   │   │   ├── gpt_lld.c -│   │   │   ├── gpt_lld.h -│   │   │   ├── i2c_lld.c -│   │   │   ├── i2c_lld.h -│   │   │   ├── pal_lld.c -│   │   │   ├── pal_lld.h -│   │   │   ├── serial_lld.c -│   │   │   ├── serial_lld.h -│   │   │   ├── st_lld.c -│   │   │   ├── st_lld.h -│   │   │   ├── usb_lld.c -│   │   │   └── usb_lld.h -│   │   └── README.md -│   ├── LPC -│   ├── simulator -│   └── STM32 -├── src -│   ├── adc.c -│   ├── can.c -│   ├── dac.c -│   ├── ext.c -│   ├── gpt.c -│   ├── hal.c -│   ├── hal_mmcsd.c -│   ├── hal_queues.c -│   ├── i2c.c -│   ├── i2s.c -│   ├── icu.c -│   ├── mac.c -│   ├── mmc_spi.c -│   ├── pal.c -│   ├── pwm.c -│   ├── rtc.c -│   ├── sdc.c -│   ├── serial.c -│   ├── serial_usb.c -│   ├── spi.c -│   ├── st.c -│   ├── uart.c -│   └── usb.c -└── templates - ├── adc_lld.c - ├── adc_lld.h - ├── can_lld.c - ├── can_lld.h - ├── dac_lld.c - ├── dac_lld.h - ├── ext_lld.c - ├── ext_lld.h - ├── gpt_lld.c - ├── gpt_lld.h - ├── halconf.h - ├── hal_lld.c - ├── hal_lld.h - ├── i2c_lld.c - ├── i2c_lld.h - ├── i2s_lld.c - ├── i2s_lld.h - ├── icu_lld.c - ├── icu_lld.h - ├── mac_lld.c - ├── mac_lld.h - ├── mcuconf.h - ├── osal - │   ├── osal.c - │   ├── osal.h - │   └── osal.mk - ├── pal_lld.c - ├── pal_lld.h - ├── platform.mk - ├── pwm_lld.c - ├── pwm_lld.h - ├── rtc_lld.c - ├── rtc_lld.h - ├── sdc_lld.c - ├── sdc_lld.h - ├── serial_lld.c - ├── serial_lld.h - ├── spi_lld.c - ├── spi_lld.h - ├── st_lld.c - ├── st_lld.h - ├── uart_lld.c - ├── uart_lld.h - ├── usb_lld.c - └── usb_lld.h diff --git a/keyboards/ergodox/infinity/Makefile b/keyboards/ergodox/infinity/Makefile deleted file mode 100644 index bd09e5885d..0000000000 --- a/keyboards/ergodox/infinity/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -ifndef MAKEFILE_INCLUDED - include ../../../Makefile -endif diff --git a/keyboards/ergodox/infinity/board_is31fl3731c.h b/keyboards/ergodox/infinity/board_is31fl3731c.h deleted file mode 100644 index f248cc25ba..0000000000 --- a/keyboards/ergodox/infinity/board_is31fl3731c.h +++ /dev/null @@ -1,110 +0,0 @@ -/* -Copyright 2016 Fred Sundvik - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef _GDISP_LLD_BOARD_H -#define _GDISP_LLD_BOARD_H - -static const I2CConfig i2ccfg = { - 400000 // clock speed (Hz); 400kHz max for IS31 -}; - -static const uint8_t led_mask[] = { - 0xFF, 0x00, /* C1-1 -> C1-16 */ - 0xFF, 0x00, /* C2-1 -> C2-16 */ - 0xFF, 0x00, /* C3-1 -> C3-16 */ - 0xFF, 0x00, /* C4-1 -> C4-16 */ - 0x3F, 0x00, /* C5-1 -> C5-16 */ - 0x00, 0x00, /* C6-1 -> C6-16 */ - 0x00, 0x00, /* C7-1 -> C7-16 */ - 0x00, 0x00, /* C8-1 -> C8-16 */ - 0x00, 0x00, /* C9-1 -> C9-16 */ -}; - -// The address of the LED -#define LA(c, r) (c + r * 16 ) -// Need to be an address that is not mapped, but inside the range of the controller matrix -#define NA LA(8, 8) - -// The numbers in the comments are the led numbers DXX on the PCB -// The mapping is taken from the schematic of left hand side -static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = { -// 45 44 43 42 41 40 39 - { LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)}, -// 52 51 50 49 48 47 46 - { LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2) }, -// 58 57 56 55 54 53 N/A - { LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA }, -// 67 66 65 64 63 62 61 - { LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2) }, -// 76 75 74 73 72 60 59 - { LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0) }, -// N/A N/A N/A N/A N/A N/A 68 - { NA, NA, NA, NA, NA, NA, LA(5, 4) }, -// N/A N/A N/A N/A 71 70 69 - { NA, NA, NA, NA, LA(6, 2), LA(6, 1), LA(6, 0) }, -}; - - -#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND -#define IS31_TIMEOUT 5000 - -static GFXINLINE void init_board(GDisplay *g) { - (void) g; - /* I2C pins */ - palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL - palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA - palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL); - palClearPad(GPIOB, 16); - /* start I2C */ - i2cStart(&I2CD1, &i2ccfg); - // try high drive (from kiibohd) - I2CD1.i2c->C2 |= I2Cx_C2_HDRS; - // try glitch fixing (from kiibohd) - I2CD1.i2c->FLT = 4; -} - -static GFXINLINE void post_init_board(GDisplay *g) { - (void) g; -} - -static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) { - (void) g; - return led_mask; -} - -static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y) -{ - (void) g; - return led_mapping[y][x]; -} - -static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) { - (void) g; - if(!shutdown) { - palSetPad(GPIOB, 16); - } - else { - palClearPad(GPIOB, 16); - } -} - -static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { - (void) g; - i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT)); -} - -#endif /* _GDISP_LLD_BOARD_H */ diff --git a/keyboards/ergodox/infinity/board_st7565.h b/keyboards/ergodox/infinity/board_st7565.h deleted file mode 100644 index 9ab636c95d..0000000000 --- a/keyboards/ergodox/infinity/board_st7565.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -#ifndef _GDISP_LLD_BOARD_H -#define _GDISP_LLD_BOARD_H - -#define ST7565_LCD_BIAS ST7565_LCD_BIAS_9 // actually 6 -#define ST7565_ADC ST7565_ADC_NORMAL -#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC -#define ST7565_PAGE_ORDER 0,1,2,3 -/* - * Custom page order for several LCD boards, e.g. HEM12864-99 - * #define ST7565_PAGE_ORDER 4,5,6,7,0,1,2,3 - */ - -#define ST7565_GPIOPORT GPIOC -#define ST7565_PORT PORTC -#define ST7565_A0_PIN 7 -#define ST7565_RST_PIN 8 -#define ST7565_MOSI_PIN 6 -#define ST7565_SLCK_PIN 5 -#define ST7565_SS_PIN 4 - -#define palSetPadModeRaw(portname, bits) \ - ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits - -#define palSetPadModeNamed(portname, portmode) \ - palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode) - -#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2) -// DSPI Clock and Transfer Attributes -// Frame Size: 8 bits -// MSB First -// CLK Low by default -static const SPIConfig spi1config = { - // Operation complete callback or @p NULL. - .end_cb = NULL, - //The chip select line port - when not using pcs. - .ssport = ST7565_GPIOPORT, - // brief The chip select line pad number - when not using pcs. - .sspad=ST7565_SS_PIN, - // SPI initialization data. - .tar0 = - SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes - | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns - | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns - | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns - | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2 - | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns -}; - -static GFXINLINE void acquire_bus(GDisplay *g) { - (void) g; - // Only the LCD is using the SPI bus, so no need to acquire - // spiAcquireBus(&SPID1); - spiSelect(&SPID1); -} - -static GFXINLINE void release_bus(GDisplay *g) { - (void) g; - // Only the LCD is using the SPI bus, so no need to release - //spiReleaseBus(&SPID1); - spiUnselect(&SPID1); -} - -static GFXINLINE void init_board(GDisplay *g) { - (void) g; - palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL); - palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN); - palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL); - palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN); - palSetPadModeRaw(MOSI, ST7565_SPI_MODE); - palSetPadModeRaw(SLCK, ST7565_SPI_MODE); - palSetPadModeNamed(SS, PAL_MODE_OUTPUT_PUSHPULL); - - spiInit(); - spiStart(&SPID1, &spi1config); - release_bus(g); -} - -static GFXINLINE void post_init_board(GDisplay *g) { - (void) g; -} - -static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) { - (void) g; - if (state) { - palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN); - } - else { - palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN); - } -} - -static GFXINLINE void enter_data_mode(GDisplay *g) { - palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN); -} - -static GFXINLINE void enter_cmd_mode(GDisplay *g) { - palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN); -} - - -static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { - (void) g; - spiSend(&SPID1, length, data); -} - -#endif /* _GDISP_LLD_BOARD_H */ diff --git a/keyboards/ergodox/infinity/bootloader_defs.h b/keyboards/ergodox/infinity/bootloader_defs.h deleted file mode 100644 index c67153be60..0000000000 --- a/keyboards/ergodox/infinity/bootloader_defs.h +++ /dev/null @@ -1 +0,0 @@ -#define KIIBOHD_BOOTLOADER diff --git a/keyboards/ergodox/infinity/chconf.h b/keyboards/ergodox/infinity/chconf.h deleted file mode 100644 index d59c35eb68..0000000000 --- a/keyboards/ergodox/infinity/chconf.h +++ /dev/null @@ -1,524 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 100000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/keyboards/ergodox/infinity/config.h b/keyboards/ergodox/infinity/config.h deleted file mode 100644 index c46edeb7b2..0000000000 --- a/keyboards/ergodox/infinity/config.h +++ /dev/null @@ -1,75 +0,0 @@ -/* -Copyright 2015 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef INFINITY_ERGODOX_CONFIG_H -#define INFINITY_ERGODOX_CONFIG_H - -#include "../config.h" - - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6464 -#define DEVICE_VER 0x0001 -/* in python2: list(u"whatever".encode('utf-16-le')) */ -/* at most 32 characters or the ugly hack in usb_main.c borks */ -#define MANUFACTURER "TMK" -#define USBSTR_MANUFACTURER 'T', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00' -#define PRODUCT "Infinity keyboard/TMK" -#define USBSTR_PRODUCT 'I', '\x00', 'n', '\x00', 'f', '\x00', 'i', '\x00', 'n', '\x00', 'i', '\x00', 't', '\x00', 'y', '\x00', ' ', '\x00', 'k', '\x00', 'e', '\x00', 'y', '\x00', 'b', '\x00', 'o', '\x00', 'a', '\x00', 'r', '\x00', 'd', '\x00', '/', '\x00', 'T', '\x00', 'M', '\x00', 'K', '\x00' - -/* key matrix size */ -#define MATRIX_ROWS 18 -#define MATRIX_COLS 5 -#define LOCAL_MATRIX_ROWS 9 - -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 3 - -#define LED_BRIGHTNESS_LO 100 -#define LED_BRIGHTNESS_HI 255 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -#define SERIAL_LINK_BAUD 562500 -#define SERIAL_LINK_THREAD_PRIORITY (NORMALPRIO - 1) - -#define VISUALIZER_USER_DATA_SIZE 16 - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/ergodox/infinity/gfxconf.h b/keyboards/ergodox/infinity/gfxconf.h deleted file mode 100644 index ca338399d3..0000000000 --- a/keyboards/ergodox/infinity/gfxconf.h +++ /dev/null @@ -1,27 +0,0 @@ -/** - * This file has a different license to the rest of the uGFX system. - * You can copy, modify and distribute this file as you see fit. - * You do not need to publish your source modifications to this file. - * The only thing you are not permitted to do is to relicense it - * under a different license. - */ - -/** - * Copy this file into your project directory and rename it as gfxconf.h - * Edit your copy to turn on the uGFX features you want to use. - * The values below are the defaults. - * - * Only remove the comments from lines where you want to change the - * default value. This allows definitions to be included from - * driver makefiles when required and provides the best future - * compatibility for your project. - * - * Please use spaces instead of tabs in this file. - */ - -#ifndef _GFXCONF_H -#define _GFXCONF_H - -#include "common_gfxconf.h" - -#endif /* _GFXCONF_H */ diff --git a/keyboards/ergodox/infinity/halconf.h b/keyboards/ergodox/infinity/halconf.h deleted file mode 100644 index 55dd5e88da..0000000000 --- a/keyboards/ergodox/infinity/halconf.h +++ /dev/null @@ -1,353 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 128 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/keyboards/ergodox/infinity/infinity.c b/keyboards/ergodox/infinity/infinity.c deleted file mode 100644 index 62259ed3f6..0000000000 --- a/keyboards/ergodox/infinity/infinity.c +++ /dev/null @@ -1,195 +0,0 @@ -#include "infinity.h" -#include "ch.h" -#include "hal.h" -#include "serial_link/system/serial_link.h" -#ifdef VISUALIZER_ENABLE -#include "lcd_backlight.h" -#endif - -void init_serial_link_hal(void) { - PORTA->PCR[1] = PORTx_PCRn_PE | PORTx_PCRn_PS | PORTx_PCRn_PFE | PORTx_PCRn_MUX(2); - PORTA->PCR[2] = PORTx_PCRn_DSE | PORTx_PCRn_SRE | PORTx_PCRn_MUX(2); - PORTE->PCR[0] = PORTx_PCRn_PE | PORTx_PCRn_PS | PORTx_PCRn_PFE | PORTx_PCRn_MUX(3); - PORTE->PCR[1] = PORTx_PCRn_DSE | PORTx_PCRn_SRE | PORTx_PCRn_MUX(3); -} - -#define RED_PIN 1 -#define GREEN_PIN 2 -#define BLUE_PIN 3 -#define CHANNEL_RED FTM0->CHANNEL[0] -#define CHANNEL_GREEN FTM0->CHANNEL[1] -#define CHANNEL_BLUE FTM0->CHANNEL[2] - -#define RGB_PORT PORTC -#define RGB_PORT_GPIO GPIOC - -// Base FTM clock selection (72 MHz system clock) -// @ 0xFFFF period, 72 MHz / (0xFFFF * 2) = Actual period -// Higher pre-scalar will use the most power (also look the best) -// Pre-scalar calculations -// 0 - 72 MHz -> 549 Hz -// 1 - 36 MHz -> 275 Hz -// 2 - 18 MHz -> 137 Hz -// 3 - 9 MHz -> 69 Hz (Slightly visible flicker) -// 4 - 4 500 kHz -> 34 Hz (Visible flickering) -// 5 - 2 250 kHz -> 17 Hz -// 6 - 1 125 kHz -> 9 Hz -// 7 - 562 500 Hz -> 4 Hz -// Using a higher pre-scalar without flicker is possible but FTM0_MOD will need to be reduced -// Which will reduce the brightness range -#define PRESCALAR_DEFINE 0 -void lcd_backlight_hal_init(void) { - // Setup Backlight - SIM->SCGC6 |= SIM_SCGC6_FTM0; - FTM0->CNT = 0; // Reset counter - - // PWM Period - // 16-bit maximum - FTM0->MOD = 0xFFFF; - - // Set FTM to PWM output - Edge Aligned, Low-true pulses -#define CNSC_MODE FTM_SC_CPWMS | FTM_SC_PS(4) | FTM_SC_CLKS(0) - CHANNEL_RED.CnSC = CNSC_MODE; - CHANNEL_GREEN.CnSC = CNSC_MODE; - CHANNEL_BLUE.CnSC = CNSC_MODE; - - // System clock, /w prescalar setting - FTM0->SC = FTM_SC_CLKS(1) | FTM_SC_PS(PRESCALAR_DEFINE); - - CHANNEL_RED.CnV = 0; - CHANNEL_GREEN.CnV = 0; - CHANNEL_BLUE.CnV = 0; - - RGB_PORT_GPIO->PDDR |= (1 << RED_PIN); - RGB_PORT_GPIO->PDDR |= (1 << GREEN_PIN); - RGB_PORT_GPIO->PDDR |= (1 << BLUE_PIN); - -#define RGB_MODE PORTx_PCRn_SRE | PORTx_PCRn_DSE | PORTx_PCRn_MUX(4) - RGB_PORT->PCR[RED_PIN] = RGB_MODE; - RGB_PORT->PCR[GREEN_PIN] = RGB_MODE; - RGB_PORT->PCR[BLUE_PIN] = RGB_MODE; -} - -static uint16_t cie_lightness(uint16_t v) { - // The CIE 1931 formula for lightness - // Y = luminance (output) 0-1 - // L = lightness input 0 - 100 - - // Y = (L* / 902.3) if L* <= 8 - // Y = ((L* + 16) / 116)^3 if L* > 8 - - float l = 100.0f * (v / 65535.0f); - float y = 0.0f; - if (l <= 8.0f) { - y = l / 902.3; - } - else { - y = ((l + 16.0f) / 116.0f); - y = y * y * y; - if (y > 1.0f) { - y = 1.0f; - } - } - return y * 65535.0f; -} - -void lcd_backlight_hal_color(uint16_t r, uint16_t g, uint16_t b) { - CHANNEL_RED.CnV = cie_lightness(r); - CHANNEL_GREEN.CnV = cie_lightness(g); - CHANNEL_BLUE.CnV = cie_lightness(b); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); - // The backlight always has to be initialized, otherwise it will stay lit -#ifndef VISUALIZER_ENABLE - lcd_backlight_hal_init(); -#endif -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -__attribute__ ((weak)) -void ergodox_board_led_on(void){ -} - -__attribute__ ((weak)) -void ergodox_right_led_1_on(void){ -} - -__attribute__ ((weak)) -void ergodox_right_led_2_on(void){ -} - -__attribute__ ((weak)) -void ergodox_right_led_3_on(void){ -} - -__attribute__ ((weak)) -void ergodox_board_led_off(void){ -} - -__attribute__ ((weak)) -void ergodox_right_led_1_off(void){ -} - -__attribute__ ((weak)) -void ergodox_right_led_2_off(void){ -} - -__attribute__ ((weak)) -void ergodox_right_led_3_off(void){ -} - -__attribute__ ((weak)) -void ergodox_right_led_1_set(uint8_t n) { -} - -__attribute__ ((weak)) -void ergodox_right_led_2_set(uint8_t n) { -} - -__attribute__ ((weak)) -void ergodox_right_led_3_set(uint8_t n) { -} - -#ifdef ONEHAND_ENABLE -__attribute__ ((weak)) -const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { - {{0, 9}, {1, 9}, {2, 9}, {3, 9}, {4, 9}}, - {{0, 10}, {1, 10}, {2, 10}, {3, 10}, {4, 10}}, - {{0, 11}, {1, 11}, {2, 11}, {3, 11}, {4, 11}}, - {{0, 12}, {1, 12}, {2, 12}, {3, 12}, {4, 12}}, - {{0, 13}, {1, 13}, {2, 13}, {3, 13}, {4, 13}}, - {{0, 14}, {1, 14}, {2, 14}, {3, 14}, {4, 14}}, - {{0, 15}, {1, 15}, {2, 15}, {3, 15}, {4, 15}}, - {{0, 16}, {1, 16}, {2, 16}, {3, 16}, {4, 16}}, - {{0, 17}, {1, 17}, {2, 17}, {3, 17}, {4, 17}}, - {{0, 0}, {1, 0}, {2, 0}, {3, 0}, {4, 0}}, - {{0, 1}, {1, 1}, {2, 1}, {3, 1}, {4, 1}}, - {{0, 2}, {1, 2}, {2, 2}, {3, 2}, {4, 2}}, - {{0, 3}, {1, 3}, {2, 3}, {3, 3}, {4, 3}}, - {{0, 4}, {1, 4}, {2, 4}, {3, 4}, {4, 4}}, - {{0, 5}, {1, 5}, {2, 5}, {3, 5}, {4, 5}}, - {{0, 6}, {1, 6}, {2, 6}, {3, 6}, {4, 6}}, - {{0, 7}, {1, 7}, {2, 7}, {3, 7}, {4, 7}}, - {{0, 8}, {1, 8}, {2, 8}, {3, 8}, {4, 8}}, -}; -#endif diff --git a/keyboards/ergodox/infinity/infinity.h b/keyboards/ergodox/infinity/infinity.h deleted file mode 100644 index 73a0f4bf70..0000000000 --- a/keyboards/ergodox/infinity/infinity.h +++ /dev/null @@ -1,121 +0,0 @@ -#ifndef KEYBOARDS_ERGODOX_INFINITY_INFINITY_H_ -#define KEYBOARDS_ERGODOX_INFINITY_INFINITY_H_ - -#include "quantum.h" - -void ergodox_board_led_on(void); -void ergodox_right_led_1_on(void); -void ergodox_right_led_2_on(void); -void ergodox_right_led_3_on(void); - -inline void ergodox_right_led_on(uint8_t led) { - switch (led) { - case 0: - ergodox_right_led_1_on(); - break; - case 1: - ergodox_right_led_2_on(); - break; - case 2: - ergodox_right_led_3_on(); - break; - } -} - -void ergodox_board_led_off(void); -void ergodox_right_led_1_off(void); -void ergodox_right_led_2_off(void); -void ergodox_right_led_3_off(void); -inline void ergodox_right_led_off(uint8_t led) { - switch (led) { - case 0: - ergodox_right_led_1_off(); - break; - case 1: - ergodox_right_led_2_off(); - break; - case 2: - ergodox_right_led_3_off(); - break; - } -} - -inline void ergodox_led_all_on(void) -{ - ergodox_board_led_on(); - ergodox_right_led_1_on(); - ergodox_right_led_2_on(); - ergodox_right_led_3_on(); -} - -inline void ergodox_led_all_off(void) -{ - ergodox_board_led_off(); - ergodox_right_led_1_off(); - ergodox_right_led_2_off(); - ergodox_right_led_3_off(); -} - -void ergodox_right_led_1_set(uint8_t n); -void ergodox_right_led_2_set(uint8_t n); -void ergodox_right_led_3_set(uint8_t n); - -inline void ergodox_right_led_set(uint8_t led, uint8_t n){ - switch (led) { - case 0: - ergodox_right_led_1_set(n); - break; - case 1: - ergodox_right_led_2_set(n); - break; - case 2: - ergodox_right_led_3_set(n); - break; - } -} - -inline void ergodox_led_all_set(uint8_t n) { - ergodox_right_led_1_set(n); - ergodox_right_led_2_set(n); - ergodox_right_led_3_set(n); -} - -#define KEYMAP( \ - A80, A70, A60, A50, A40, A30, A20, \ - A81, A71, A61, A51, A41, A31, A21, \ - A82, A72, A62, A52, A42, A32, \ - A83, A73, A63, A53, A43, A33, A23, \ - A84, A74, A64, A54, A44, \ - A13, A03, \ - A04, \ - A34, A24, A14, \ - B20, B30, B40, B50, B60, B70, B80, \ - B21, B31, B41, B51, B61, B71, B81, \ - B32, B42, B52, B62, B72, B82, \ - B23, B33, B43, B53, B63, B73, B83, \ - B44, B54, B64, B74, B84, \ - B03, B13, \ - B04, \ - B14, B24, B34 \ -) { \ - { KC_NO, KC_NO, KC_NO, A03, A04 }, \ - { KC_NO, KC_NO, KC_NO, A13, A14 }, \ - { A20, A21, KC_NO, A23, A24 }, \ - { A30, A31, A32, A33, A34 }, \ - { A40, A41, A42, A43, A44 }, \ - { A50, A51, A52, A53, A54 }, \ - { A60, A61, A62, A63, A64 }, \ - { A70, A71, A72, A73, A74 }, \ - { A80, A81, A82, A83, A84 }, \ - { KC_NO, KC_NO, KC_NO, B03, B04 }, \ - { KC_NO, KC_NO, KC_NO, B13, B14 }, \ - { B20, B21, KC_NO, B23, B24 }, \ - { B30, B31, B32, B33, B34 }, \ - { B40, B41, B42, B43, B44 }, \ - { B50, B51, B52, B53, B54 }, \ - { B60, B61, B62, B63, B64 }, \ - { B70, B71, B72, B73, B74 }, \ - { B80, B81, B82, B83, B84 } \ -} - -#endif /* KEYBOARDS_ERGODOX_INFINITY_INFINITY_H_ */ diff --git a/keyboards/ergodox/infinity/led.c b/keyboards/ergodox/infinity/led.c deleted file mode 100644 index 8175c1c5c5..0000000000 --- a/keyboards/ergodox/infinity/led.c +++ /dev/null @@ -1,26 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "hal.h" - -#include "led.h" - - -void led_set(uint8_t usb_led) { - //TODO: Add led emulation if there's no customized visualization - (void)usb_led; -} diff --git a/keyboards/ergodox/infinity/matrix.c b/keyboards/ergodox/infinity/matri