From dc2315ad85a9d0eedc7ebfc3329bec4583764681 Mon Sep 17 00:00:00 2001 From: dztech Date: Thu, 21 Sep 2023 14:01:38 +0800 Subject: add dz60v2 keyboard (#21862) Co-authored-by: Duncan Sutherland Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/dztech/dz60v2/readme.md | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 keyboards/dztech/dz60v2/readme.md (limited to 'keyboards/dztech/dz60v2/readme.md') diff --git a/keyboards/dztech/dz60v2/readme.md b/keyboards/dztech/dz60v2/readme.md new file mode 100644 index 0000000000..51ccd9a12b --- /dev/null +++ b/keyboards/dztech/dz60v2/readme.md @@ -0,0 +1,26 @@ +# DZ60 60% Mechanical Keyboard PCB + +## A Customizable 60% Mechanical Keyboard PCB + +* Keyboard Maintainer: QMK Community +* Hardware Supported: DZ60 60% Mechanical Keyboard PCB +* Hardware Availability: [KBDfans](https://kbdfans.com/collections/60/products/dz60-60-pcb) + +There are two versions of the DZ60 PCB. Please use the appropriate firmware for your board. + +* V1: 1.6mm thickness PCB; +* V2: 1.2mm thickness PCB + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix +* **Physical reset button**: Briefly press the button on the back of the PCB +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available + +Make example for this keyboard (after setting up your build environment): + + make dztech/dz60v2:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). -- cgit v1.2.3