From ad86894ae7d5fbb7aed697d9f576cd186bfd1c9c Mon Sep 17 00:00:00 2001 From: Erovia Date: Sun, 25 Oct 2020 15:23:42 +0000 Subject: Rename keyboard-level readmes to lower-case (#10759) This is the recommendation in the [PR Checklist](https://docs.qmk.fm/#/pr_checklist?id=keyboard-prs) and it will make working with them easier in the CLI/API/etc. --- keyboards/converter/xt_usb/README.md | 17 ----------------- keyboards/converter/xt_usb/readme.md | 17 +++++++++++++++++ 2 files changed, 17 insertions(+), 17 deletions(-) delete mode 100644 keyboards/converter/xt_usb/README.md create mode 100644 keyboards/converter/xt_usb/readme.md (limited to 'keyboards/converter/xt_usb') diff --git a/keyboards/converter/xt_usb/README.md b/keyboards/converter/xt_usb/README.md deleted file mode 100644 index 40b265a189..0000000000 --- a/keyboards/converter/xt_usb/README.md +++ /dev/null @@ -1,17 +0,0 @@ -XT to USB keyboard converter -============================== -This is a port of TMK's converter/xt_usb to QMK. - -This firmware converts XT keyboard protocol to USB.(It supports Scan Code Set 1.) - - -Connect Wires -------------- -1. Connect **Vcc** and **GND**. -2. Connect **Clock** and **Data** line. **Clock** is on `PD1`, **Data** on `PD0` by default. And optionally you can use `PB7` for **Reset**.(Compatible to Soarer's converter) To change pin configuration edit `config.h`. -3. You need pull-up resistor. **1K-10K Ohm** will be OK. - - -XT keyboard protocol resource ------------------------------- -https://github.com/tmk/tmk_keyboard/wiki/IBM-PC-XT-Keyboard-Protocol diff --git a/keyboards/converter/xt_usb/readme.md b/keyboards/converter/xt_usb/readme.md new file mode 100644 index 0000000000..40b265a189 --- /dev/null +++ b/keyboards/converter/xt_usb/readme.md @@ -0,0 +1,17 @@ +XT to USB keyboard converter +============================== +This is a port of TMK's converter/xt_usb to QMK. + +This firmware converts XT keyboard protocol to USB.(It supports Scan Code Set 1.) + + +Connect Wires +------------- +1. Connect **Vcc** and **GND**. +2. Connect **Clock** and **Data** line. **Clock** is on `PD1`, **Data** on `PD0` by default. And optionally you can use `PB7` for **Reset**.(Compatible to Soarer's converter) To change pin configuration edit `config.h`. +3. You need pull-up resistor. **1K-10K Ohm** will be OK. + + +XT keyboard protocol resource +------------------------------ +https://github.com/tmk/tmk_keyboard/wiki/IBM-PC-XT-Keyboard-Protocol -- cgit v1.2.3