From f6bbd4d2c5554b93351977933cea396db9456689 Mon Sep 17 00:00:00 2001 From: Ramiro Bou <2000719+Polsaker@users.noreply.github.com> Date: Sat, 3 Jun 2023 17:38:09 -0300 Subject: [Keyboard] Add Churrosoft Deck-8 (#21119) Co-authored-by: Albert Y <76888457+filterpaper@users.noreply.github.com> Co-authored-by: jack <0x6a73@protonmail.com> --- keyboards/churrosoft/deck8/rgb/readme.md | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 keyboards/churrosoft/deck8/rgb/readme.md (limited to 'keyboards/churrosoft/deck8/rgb/readme.md') diff --git a/keyboards/churrosoft/deck8/rgb/readme.md b/keyboards/churrosoft/deck8/rgb/readme.md new file mode 100644 index 0000000000..87fe400c24 --- /dev/null +++ b/keyboards/churrosoft/deck8/rgb/readme.md @@ -0,0 +1,27 @@ +# Churrosoft Deck-8 (RGB Version) + +![ChurroDeck-8](https://i.imgur.com/NNmq8hzh.png) + +A small 8-key macropad with RGB + +* Keyboard Maintainer: [Polsaker](https://github.com/Polsaker) +* Hardware Supported: ChurroDeck PCV rev. 1b, 1c and 1d +* Hardware Availability: [churrosoft.ar](https://churrosoft.ar/deck) + +Make example for this keyboard (after setting up your build environment): + + make churrosoft/deck8/rgb:default + +Flashing example for this keyboard: + + make churrosoft/deck8/rgb:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the top left key) and plug in the keyboard +* **Physical reset button**: Short the `JP1` jumper in the back side of the PCB. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available \ No newline at end of file -- cgit v1.2.3