From e34af631c2c4b0c9406dead907bf74b460ee9f7f Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Fri, 10 Jan 2020 01:31:01 +0000 Subject: Refactor f103,f072,f042 based keyboards to use new MCU selection defaults (#7705) * refactor keyboards using ST_STM32F072B_DISCOVERY to use 'MCU = STM32F072' * refactor keyboards using GENERIC_STM32_F042X6 to use 'MCU = STM32F042' * refactor keyboards using GENERIC_STM32_F103 to use 'MCU = STM32F103' --- keyboards/cannonkeys/tmov2/rules.mk | 45 ++----------------------------------- 1 file changed, 2 insertions(+), 43 deletions(-) (limited to 'keyboards/cannonkeys/tmov2/rules.mk') diff --git a/keyboards/cannonkeys/tmov2/rules.mk b/keyboards/cannonkeys/tmov2/rules.mk index 828fa8ff80..e6f0ce30a1 100644 --- a/keyboards/cannonkeys/tmov2/rules.mk +++ b/keyboards/cannonkeys/tmov2/rules.mk @@ -1,43 +1,5 @@ -# project specific files -# SRC = ssd1306.c -## chip/board settings -# the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F0xx -# linker script to use -# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -MCU_LDSCRIPT = STM32F072xB -# startup code to use -# is should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f0xx -# it should exist either in /os/hal/boards/ -# or /boards -BOARD = ST_STM32F072B_DISCOVERY -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m0 -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 6 -# If you want to be able to jump to bootloader from firmware on STM32 MCUs, -# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in -# ./bootloader_defs.h or in ./boards//bootloader_defs.h (if you have -# a custom board definition that you plan to reuse). -# If you're not setting it here, leave it commented out. -# It is chip dependent, the correct number can be looked up here (page 175): -# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf -# This also requires a patch to chibios: -# /tmk_core/tool/chibios/ch-bootloader-jump.patch -#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 - -# Build Options -# comment out to disable the options. -# - -# Options to pass to dfu-util when flashing -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -p DF11 -v 0483 +# MCU name +MCU = STM32F072 # Build Options # comment out to disable the options. @@ -48,9 +10,6 @@ VPATH += keyboards/cannonkeys/stm32f072 SRC = keyboard.c \ led.c -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -v 0483 -p DF11 - BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control -- cgit v1.2.3