From 507dd18f2436a07abe49fdbd1ef851bb8b7ca324 Mon Sep 17 00:00:00 2001 From: fenuks Date: Mon, 29 Nov 2021 16:41:21 +0000 Subject: [Keyboard] Adapt downsteam Ghost Squid support to latest QMK (#14607) Co-authored-by: fenuks --- keyboards/bpiphany/ghost_squid/readme.md | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 keyboards/bpiphany/ghost_squid/readme.md (limited to 'keyboards/bpiphany/ghost_squid/readme.md') diff --git a/keyboards/bpiphany/ghost_squid/readme.md b/keyboards/bpiphany/ghost_squid/readme.md new file mode 100644 index 0000000000..ab39e0f725 --- /dev/null +++ b/keyboards/bpiphany/ghost_squid/readme.md @@ -0,0 +1,27 @@ +# Ghost Squid Controller + +This is the firmware for Rev. 20140518 of the Ghost Squid controller by [Bathroom Epiphanies](http://bathroomepiphanies.com/controllers/), a replacement controller for the [Cooler Master Quick Fire XT](https://www.coolermaster.com/catalog/peripheral/keyboards/quick-fire-xt/). + +The code was adapted from the [BathroomEpiphanies QMK Firmware](https://github.com/BathroomEpiphanies/epiphanies_qmk_keyboard/tree/master/keyboards/ghost_squid_20140518). + +* Keyboard Maintainer: QMK Community +* Hardware Supported: Ghost Squid +* Hardware Availability: [1upkeyboards](https://1upkeyboards.com/shop/controllers/qf-xt-ghost-squid-controller-2/) + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +Make example for this keyboard (after setting up your build environment): + +104 key default layout: + + make bpiphany/ghost_squid:default + +Flashing example for this keyboard: + + make bpiphany/ghost_squid:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). -- cgit v1.2.3