From 5149728b23906728c1959afb784489d9807625d6 Mon Sep 17 00:00:00 2001 From: ALTAiN <102286038+Altainworks@users.noreply.github.com> Date: Mon, 13 Jun 2022 14:14:33 +0900 Subject: [Keyboard] Add BLASTER75 keyboard (#16887) Co-authored-by: Ryan --- keyboards/blaster75/readme.md | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 keyboards/blaster75/readme.md (limited to 'keyboards/blaster75/readme.md') diff --git a/keyboards/blaster75/readme.md b/keyboards/blaster75/readme.md new file mode 100644 index 0000000000..1a03ec5a9f --- /dev/null +++ b/keyboards/blaster75/readme.md @@ -0,0 +1,31 @@ +# Blaster 75 + +Blaster 75 is a 75% ANSI layout Custom Keyboard designed and manufactured by Altain. + +* Keyboard Maintainer : ALTAiN +* Hardware Supported : Blaster 75 +* Hardware Availability : Produced and Sold by ALTAiN +* Mount : Top-Mount System +* Typing Angle : 6 Degree +* Front Height : 20.2mm + +## How to enter Bootloader Mode + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard. +We strongly recommend this method. If the PCB is not soldered with switches at the moment, use anything that's metal (twizzers for example) +to short the (0,0) position key ("ESC" in our PCB) while plugging the USB in. + +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +Make example for this keyboard (after setting up your build environment): + + make blaster75:default + +Flashing example for this keyboard: + + make blaster75:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). -- cgit v1.2.3